Career Search | Lam Research

Senior Computational Software Development Engineer (Austin, TX, US, 78753)

The Group You’ll Be A Part Of

The Office of the CTO is where innovation takes center stage. We inspire our global technical community to take on grand challenges, understand emerging trends, identify the critical inflections, and drive our sustainability, Environment, Social, and Governance (ESG) practices that will define the next generation of semiconductors and continued impact.

The Impact You’ll Make

You will work with the plasma physics development team for Semiverse Solutions in the Austin, Texas office. As a Physics Software Developer at Lam, you will be at the forefront of innovation by developing and enhancing VizGlow, Lam's plasma physics solver. Your role is pivotal in improving reactor hardware design, optimizing process recipes, and advancing the fundamental understanding of the physics within reactor chambers. By developing software tools that support these critical areas, you will directly impact Lam's ability to deliver cutting-edge solutions.

What You’ll Do

Develop and enhance plasma physics code with a focus on non-equilibrium plasmas, electromagnetics, reactive flows, and surface chemistry.
Implement and optimize algorithms in C++ for high-performance computing applications.
Collaborate with physicists and engineers to integrate new models and features into the software.
Validate the operation and functionality of the plasma physics code through rigorous testing and debugging.
Author technical reports summarizing software performance, defects, and enhancement requests.
Participate in planning and design discussions with the software development team.
Maintain and improve the existing codebase to ensure reliability and performance.

Who We’re Looking For

Minimum Qualifications

Master's degree in physics, plasmas, fluid mechanics, or related STEM field with 3+ years of experience; or PhD in physics, plasmas, fluid mechanics, or a related field.
Experience developing flow solvers – pressure-based flow solver, multi-species reactive flows, turbulence modelling, radiation modelling, etc.
Experience developing HPC codes using MPI, multithreading, OpenMP, etc.
Proficiency in C++ software development.

Preferred Qualifications

Knowledge of non-equilibrium plasmas, electromagnetics, reactive flows, and surface chemistry.
Experience developing large scale and/or commercial computational fluid dynamics (CFD) or multi-physics software packages such as COMSOL or Ansys Fluent.
Experience with GPU acceleration using libraries such as CUDA, Kokkos, etc.
Familiarity/awareness with physics-based machine learning (PINNS, Graph Neural Networks Neural Operators) optional but highly desirable

Our Commitment

Lam Research ("Lam" or the "Company") is an equal opportunity employer. Lam is committed to and reaffirms support of equal opportunity in employment and non-discrimination in employment policies, practices and procedures on the basis of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex (including pregnancy, childbirth and related medical conditions), gender, gender identity, gender expression, age, sexual orientation, or military and veteran status or any other category protected by applicable federal, state, or local laws. It is the Company's intention to comply with all applicable laws and regulations. Company policy prohibits unlawful discrimination against applicants or employees.

Lam offers a variety of work location models based on the needs of each role. Our hybrid roles combine the benefits of on-site collaboration with colleagues and the flexibility to work remotely and fall into two categories – On-site Flex and Virtual Flex. ‘On-site Flex’ you’ll work 3+ days per week on-site at a Lam or customer/supplier location, with the opportunity to work remotely for the balance of the week. ‘Virtual Flex’ you’ll work 1-2 days per week on-site at a Lam or customer/supplier location, and remotely the rest of the time.

#LI-SG1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Field Service Engineer 2 (Phoenix, AZ)

The Group You’ll Be A Part Of

The Customer Support Business Group focuses on enabling our customers with premier customer support throughout their lifecycle with Lam. We drive performance, productivity, safety, and quality of customers installed base performance and deliver service and lifecycle solutions for their most critical equipment and processes. Multiple positions are available for this role.

The Impact You’ll Make

As a Field Service Engineer at Lam, you will step into the limelight of customer support. Your work goes beyond installations and troubleshooting; it ensures the operational excellence of our complex semiconductor equipment. You're on the front lines, understanding customer needs and collaborating with various teams to deliver solutions.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
Ability to travel internationally for training purposes.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Mandarin language skills are a plus.
Foundational analytical and problem-solving skills.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits. Discover more at www.lambenefits.com

Strategic Commodity Manager (Livermore, CA, US, 94551)

The Group You’ll Be A Part Of

The Global Operations Group brings information systems, facilities, supply chain, logistics, and high-volume manufacturing together to drive the engine of our global business operations. We help Lam deliver industry-leading solutions with speed and efficiency, while actively supporting the resilient and profitable growth of Lam's business.

The Impact You’ll Make

As a leader in Lam’s Global Supplier Management organization, this critical position requires a passionate, driven leader who will architect and deliver strategic directions to the organization’s supply chain, ensuring the company is positioned to be a winner in a complex, fast paced, highly competitive industry. Initial focus will be to architect commodity supply chain to support a growing global business with a high degree of complexity. This includes aligning resources, prioritizing strategies, establishing targets, and implementing growth and cost initiatives that support the broader business strategy.

What You’ll Do

Develop a 3-year vision, strategy and organizational structure for assigned commodities. The strategy should enhance competitive differentiation and address commodity availability, quality, and cost.
Your focus area will be managing commodities which include Commercial Off the Shelf parts, OEM Build to Plan parts such as Load Ports and Vacuum Valves.
You will be responsible for architecting and delivering a complete end to end strategy that supports Lam’s 3-year horizon.
Execute the vision and implement the strategy by gaining executive alignment and motivating and engaging the workforce to fulfill the vision.
Lead commercial negotiations.
Drive business processes that enable effective prioritization and facilitate fast customer solutions.
Provide inspired leadership and direction to the global supply chain organization. Continue to build and develop a world class supply chain.
Instill a culture of quality and discipline into all our suppliers.
Build and maintain a strong supply chain to support and meet the needs of changing trends in the industry.
Manage supplier relationships to deliver negotiated value.
Develop strong, collaborative and effective relationships with the internal product groups.
Make decisions under pressure, sometimes with incomplete information and under tight deadlines and pressure.
Successfully operate across boundaries and prioritize the activities of the organization to achieve best in class results.
Develop and present meaningful and impactful messages to a wide array of audiences: Leadership, Global Supply Chain, Suppliers and Customers

Who We’re Looking For

Bachelor’s degree and/or MBA in Supply Chain, Business Management, Operations, Engineering, or related degree
Twelve (12) years of working experience in the related industry
Ten (10 )years of working experience in the Semiconductor Equipment industry is a plus
Strong experiences in negotiating various types of contractual agreements
Strong SAP experience
Experience working with global suppliers
Demonstrated experience working successfully in a global matrix organization
Effective verbal and written communication skills
Experience giving presentations and interaction with director reports, cross-functional teams, and senior leadership
Proficient on Excel and Power Point.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: Min $91,900 - Max $206,000.

The above salary range for this position is relevant to applicants that reside or work onsite in the California, San Francisco Bay Area only. Salary offers will depend on factors that include the location you work from, your level, education, training, specific skills, years of experience and comparison to other employees already in this role. Actual salary may vary from salary offered due to numerous factors including but not limited to unpaid time off, unpaid leave, company mandated shutdown, and other relevant factors.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

EH&S Engineer 4 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

At Lam, as an EH&S Engineer, you're instrumental in developing, implementing, and monitoring environmental safety programs and policies. Ensuring compliance with regulations, you'll perform safety inspections, conduct trainings, and oversee hazardous waste vendors and processes. Your expertise spans to life safety, workplace ergonomics, and monitoring industrial health compliance. Acting as a liaison with regulatory agencies you'll not only stay current but also reinforce Lam's commitment to safety and environmental compliance.

What You’ll Do

Position will manage and support Bay Area EHS safety and industrial hygiene programs from a systematic perspective to integrate them into Lam’s business culture. This position is responsible for management of Lam’s health and industrial hygiene programs, procedures, and initiatives. This position will perform a variety of work to ensure health and safety compliance through explanation regulatory obligations, recommendation of appropriate action and PPE, support of operational activities to minimize hazards and exposure, oversee or manage projects, maintain and improve the health and safety management system. Collaborates with all departments and functions to improve health and safety.

Position Summary & Primary Responsibilities:

Manages and supports chemical, industrial hygiene and occupational safety programs at Lam’s Fremont, California semiconductor R&D campus; conduct assessments for health and safety hazards and risks, develop sampling plans and prepare reports, identify control measures and PPE, provide training, etc.
Oversees the development, planning, and implementation of environmental, health and safety policies; develops procedures (chemical safety, ergonomics, illness and injury prevention, and operational safety).
Evaluates and approves chemicals, activities and processes for compliance and prevention of EHS impacts, particularly health and safety aspects. Assists with management of change activities, including equipment and tool installation, process safety review and R&D chemical use approval and pro-active prevention and management initiatives.
Performs a variety of work to develop, implement, and monitor company chemical and safety programs to ensure compliance with federal, state, and local regulations and industry best practices.
Analyzes performance trends to develop objectives under the EHS program. Effectively leads positive change where needed to align with business objectives and other R&D site/locations.
Provides governance to ensure accurate, holistic root cause and preventive actions are implemented.

Who We’re Looking For

Minimum of 8 years of related experience with a Bachelor’s degree in EHS, science or engineering required; or 6 years and a Master’s degree; or a PhD with 3 years experience; or equivalent experience.
Extensive EHS and/or process safety management (PSM) experience, including at least 5 years of semiconductor, cleanroom, facilities or chemical industry experience.
Deep technical experience in occupational health and safety, with focus on industrial hygiene.

Preferred Qualifications

Certified industrial hygienist preferred.

Our Commitment

IND123 #LI-FC1 #Hybrid

Salary

CA San Francisco Bay Area Salary Range for this position: $89,000.00 - $205,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Sr. Mgr, Marketing (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

In the Global Products Group, we are dedicated to excellence in the design and engineering of Lam's etch and deposition products. We drive innovation to ensure our cutting-edge solutions are helping to solve the biggest challenges in the semiconductor industry.

The Impact You’ll Make

The Etch Product Marketing Team has a strategic role within the Global Products Group in analyzing market conditions, driving future product solutions, and communicating the differentiation of these solutions to our customers.

What You’ll Do

Analyze customer device technology trends and interpret these as future etch product requirements
Develop, execute, and deliver a comprehensive product marketing strategy that aligns with business objectives
Create product marketing campaigns that convert highly complex and contextual concepts into clear customer value statements
Collaborate with internal partners, stakeholders, and external customers to identify product technical performance gaps vs. market needs and drive value-creating solutions
High fidelity competitive threat analysis
Drive systematic pricing strategies that include value-capture analysis

Who We’re Looking For

The ideal candidate will have a strong technical background and industry experience in dry plasma etch or isotropic selective etch
5-7 yrs of experience in the semiconductor industry; technology, marketing, and/or business development roles
BS (or advanced degree) in science and/or engineering
US work permit

Preferred Qualifications

MBA preferred and highly desirable

Our Commitment

#LI-LH1

Salary

CA San Francisco Bay Area Salary Range for this position: $132,000.00 - $276,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer 4 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Mechanical Engineer at Lam, you will design and define cutting-edge mechanical and electro-mechanical systems. Your role involves conducting feasibility studies, testing, and guiding teams in detailed design and fabrication. You will provide the crucial design information needed to shape our technology's packaging.

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization, including conceptualization, designing, CAD modeling, development, and test/validation.
Design components using a variety of metals, ceramics, quartz, plastics, and advanced coatings.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analyses, including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high quality, cost-optimized, and to requirements.
Provide key deliverables, including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
Provide technical guidance and mentoring to more junior engineers.

Who We’re Looking For

Bachelor’s degree in Mechanical Engineering or a related field with 8+ years of experience; or a Master’s degree with 6+ years of experience; or a PhD with 3+ years of experience; or equivalent experience.
Excellent communication, both written and verbal, and technical presentation skills.
Highly proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills.

Preferred Qualifications

Experience in the semiconductor industry is a plus.
Experience in leading projects or problem-solving while managing time and multiple priorities.

Our Commitment

#LI-SG1

Salary

CA San Francisco Bay Area Salary Range for this position: $100,000.00 - $220,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Product Regulatory Compliance Specialist (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

We are looking for a regulatory compliance specialist with 8+ years of experience in managing the compliance of semiconductor manufacturing equipment and related products to applicable environmental and safety regulations and industry standards. The independent and adaptable candidate will be responsible for ensuring that Lam maintains a sharp focus on the constantly evolving regulatory landscape applicable to Lam’s products, and that Lam continues to be positioned to respond in a proactive manner.

What You’ll Do

You will work directly with our engineering community, supply-chain management, and fellow product safety and environmental engineers to ensure evolving regulations are monitored, assessments of impact are prepared, and Lam’s interests regarding proposed regulations are clearly communicated within Lam and to regulatory agencies in collaboration with other industry stakeholders (e.g., within SEMI) or directly in collaboration with Lam Government Affairs and Legal Compliance staff. You will participate in cross-functional teams, blending your regulatory knowledge with strategic planning to ensure regulatory compliance of Lam products.

Responsibilities

Monitor global EHS and adjacent regulatory actions that may impact Lam products
Work with applicable Lam stakeholders to assess impact to Lam products and business processes
Work with applicable Lam stakeholders, prepare actions necessary to message and comply with applicable regulations, including creating and revising engineering process and policy documents.
Help drive Lam’s understanding, response, and implementation of SEMI EHS standards that impact Lam’s products
Explain to management the foreseen impacts to Lam products
Assess and measure affected Lam organizations’ implementation of actions to comply with applicable regulations
Create regulation explanation, action-plan, and action-status slide decks (and other documents) for a variety of audiences

Preferred Qualifications

Minimum of a Bachelor’s degree in Engineering, sciences, or related applicable discipline
Familiarity and experience working with international regulatory agencies, legislative bodies, and their agents to understand, assess and influence final rulemaking
Applied knowledge of regulations such as EU REACH, EU & China RoHS, EU CE Marking, NFPA, and EU EMC as it relates to high-tech capital equipment
Experience in applying SEMI safety guidelines to semiconductor manufacturing equipment
Excellent written and oral communication skills
Excellent interpersonal and organizational skills
Adept at independent and collaborative work priority adjustment.

Our Commitment

#LI-SG1

Salary

CA San Francisco Bay Area Salary Range for this position: $100,000.00 - $220,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Identity and Access Management (IDAM) Manager (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

Identity and Access Management (IDAM) Manager

to lead and execute an IDAM strategy. In this role, you will be responsible for managing secure, compliant, and efficient access to systems and data, covering both on-premises and cloud environments. Working closely with Infosec, HR and other key departments, you'll enforce access policies and security controls, ensuring a secure digital environment for all stakeholders.

The Impact You’ll Make

As IDAM Manager, you will spearhead the implementation and maintenance of IDAM solutions, manage a team of IDAM specialists, and collaborate with cross-functional teams to align IDAM practices across the organization.

What You’ll Do

IDAM Program Leadership:

Lead IDAM initiatives focused on ensuring security, compliance, and operational efficiency in user access management.

Plan, execute, and monitor IS infrastructure projects, ensuring alignment with business goals and compliance with standards and regulations in areas of
Authentication and Authorization: SAML, OAuth, Multi-Factor Authentication (MFA)
Identity Governance and Administration (IGA): Role-based access control (RBAC), Identity lifecycle management (ILM)
Directory services: Active Directory, Azure Active Directory ( Entra)
Privileged access management: Cyber-Ark
Automation: PowerShell

Access Governance and Compliance:

Conduct regular audits and reviews to verify compliance with access policies and regulatory mandates, supporting internal and external audits, and enforcing IDAM policies that align with regulatory requirements and industry standards (e.g., NIST, ISO).
Manage access certification campaigns and lead efforts to remediate access-related risks.

Identity Lifecycle Management:

Implement and manage role-based access controls (RBAC) and other access models for secure and efficient access management.
Collaborate with HR, Infosec, and business units to automate and streamline identity and access processes, incorporating self-service options where applicable.

Who We’re Looking For

Required Qualifications:

Bachelor's degree in Information Security, Computer Science, Information Technology, or a related field (or equivalent experience).
3–5 years of experience in IDAM, Information Security, or a related field, with at least 3 years in a leadership or managerial role.
Strong technical expertise in IDAM solutions, including experience with identity and access management tools and technologies.
Excellent project management skills, with experience leading cross-functional initiatives.
Strong written and verbal communication skills, with the ability to present to senior management.

Preferred Qualifications

Master’s degree in Information Security, Computer Science, Information Technology, or a related field (or equivalent experience).
Relevant IDAM or security certifications (e.g., CIAM, CISSP, CISM) are preferred.
5–7 years of experience in IDAM or Information Security, with at least 2 years in a managerial or team lead role.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $111,000.00 - $244,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Software Engineer Sys 5 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

In the Global Products Group, we are dedicated to excellence in the design and engineering of Lam’s etch and deposition products. We drive innovation to ensure our cutting-edge solutions are helping to solve the biggest challenges in the semiconductor industry.

The Impact You’ll Make

As a Software Engineer at Lam, you will be at the forefront of innovation by designing, developing, troubleshooting, and debugging software programs. Your role is pivotal in developing software tools that support design, infrastructure, and technology platforms. Your expertise will determine hardware compatibility and influence design, ensuring seamless integration between software and hardware. In this role, you’ll make an impact across Lam’s entire product portfolio of equipment, working within our centralized software engineering team, collaborating with some of the brightest minds in the industry.

What You’ll Do

Designs, develops and troubleshoots software programs that Utilize Generative AI. Can independently build Application that Interfaces with Generative AI models.

Implement new customer requirements and features in application that utilize Generative AI
Maintain existing Generative AI code bases and investigating problem areas.
Demonstrating solutions by providing documentation, flowcharts, and clear code.
Working in cross functional teams throughout our organization

Who We’re Looking For

B.S or Master’s in Computer science, Computer Engineering, Electronics or related field with 7+ years of industry experience
Experience in applications that utilize Generative AI.
Prompt engineering Experience is a must
Usage of Vector databases in combination with Large language models
Knowledge of Object-Oriented Software implementation and design e.g.: Design Patterns and Finite State Machines
Strong software engineering skills: modular design, data structures and algorithms.
Experience with Source Control and Development life cycles.
Analytical approach to root cause analysis

Preferred Qualifications

Prior semiconductor equipment experience.
Experience with LangChain / LangGraph preferred

Our Commitment

#LI-SG1

Salary

CA San Francisco Bay Area Salary Range for this position: $135,000.00 - $294,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

DevOps Architect (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Global Information Systems Group is dedicated to the success of Lam through providing best-in-class and innovative information system solutions and services. Together, we support users globally with data, information, and systems to achieve their business objectives.

The Impact You’ll Make

We are seeking an experienced DevOps Architect to join our team in Fremont, CA. This leadership role involves planning, strategy, roadmap, and execution of DevOps initiatives. The ideal candidate will lead partner teams and excel in a matrixed environment, ensuring seamless integration and secure development practices.

What You’ll Do

Develop and implement DevOps strategies, roadmaps, and execution plans.
Lead the integration of SAST tools like SonarQube and Blackduck into CI-CD pipelines to enhance secure development and testing.
Collaborate with cross-functional teams, including marketing, IT, and customer service, to ensure alignment and successful project delivery.
Drive the adoption of best practices in DevOps, including automation, continuous integration, and continuous deployment.
Provide technical leadership and guidance to partner teams, fostering a culture of collaboration and innovation.
Ensure the scalability, reliability, and security of applications and infrastructure.
Monitor and optimize system performance, identifying and resolving issues proactively.

Who We’re Looking For

Bachelor's degree in Computer Science, Information Technology, or a related field.
Proven experience in DevOps architecture and leadership roles.
Strong knowledge of Microsoft and SAP technology stacks for application lifecycle management.
Understanding of secure development practices and experience in integrating the SAST tools like SonarQube and Blackduck in CI-CD pipelines.
Understanding of SaaS applications, Siemens Teamcenter PLM, and Opcenter MES application lifecycle management.
Proficiency in CI-CD pipelines and automation tools, including Azure DevOps and GitHub.
Excellent communication and collaboration skills.
Ability to lead in a matrixed environment and manage partner teams effectively.
Required Experience:
- DevOps: 7-9 years
- Application development and scripting: 5-7 years

Preferred Qualifications

Master's degree in a related field.
Certifications in DevOps, cloud technologies, or security.
Experience with containerization and orchestration tools (e.g., Docker, Kubernetes).
Familiarity with Infrastructure as Code (IaC) tools like Terraform and ARM templates.
Familiarity with agile methodologies and project management tools.

Preferred Certifications:

Microsoft Certified: Azure DevOps Engineer Expert
AWS Certified DevOps Engineer - Professional
GitHub Advanced Security Certification
Certified Kubernetes Administrator (CKA)
Terraform Associate Certification
Certified Information Systems Security Professional (CISSP)

Our Commitment

IND123 #LI-FC1 #LI-Hybrid

Salary

CA San Francisco Bay Area Salary Range for this position: $132,000.00 - $276,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Sr. Mgr, Program Management (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Customer Support Business Group (CSBG) focuses on enabling our customers with premier customer support throughout their lifecycle with Lam. We drive performance, productivity, safety, and quality of customers installed base performance and deliver service and lifecycle solutions for their most critical equipment and processes.

The Impact You’ll Make

As a Program Manager in CSBG, you will play a pivotal role in leading programs to enhance the efficiency of our Field Service organization and improve our install base accuracy. This person will be responsible for the Global Field Operations business process and systems support, which enable our Field Service Engineers to create work orders, order parts, and charge time. This role will lead cross-functional teams to address service business process or systems issues within SAP & Microsoft Dynamics Field Service Management modules. Analyze complex business problems and develop business requirements to scale systems, processes, and procedures in a cost-effective manner.

What You’ll Do

Manage daily sustaining support for a large field service organization
Oversee equipment setup, service hierarchy maintenance, and access management
Responsible for install base accuracy to enable future service revenue opportunities
Ensure transactional data integrity between front-end and back-end applications
Plans and executes unit, integration, and acceptance testing to meet business requirements
Resolve financial settlement issues for labor and material charges
Identify automations to ensure labor and material transactions are following business policies and procedures
Lead cross-functional teams to address complex business issues or systems issues as required
Work closely with Regional Operations, Spares, Marketing, Knowledge Management, Product Management, and other functions to identify, recommend, and implement corrective actions or process re-engineering to optimize field service efficiency and productivity
Provide expertise in identifying, evaluating, and developing system requirements and procedures that are cost effective, meet user requirements, and consider data quality requirements
Develop and implement effective KPIs to facilitate continuous improvement and measure success

Who We’re Looking For

10+ years working experience in SAP, Field Service, Operations, or Quality disciplines
Bachelor's degree in Computer Science, Engineering, Technology, Operations or equivalent
SAP or MS Dynamics experience (FSM, CS, PM or SD) strongly recommended
Understanding of relationship and data flows between Sales Forecast, Sales Orders, Service Notifications, Service Orders, BOMs, and Contracts
Excellent interpersonal skills with the ability to motivate, influence, manage and drive results within a complex organizational environment
Experience working in or collaborating with Field Service (customers, technicians, or engineers)

Preferred Qualifications

SAP S4 HANA experience, specifically Customer Management (CRM/CM) or Field Service Management module
Demonstrable expertise in use of structured problem-solving methodologies (PDCA, DMAIC, 8D)
Semiconductor / industrial industry experience preferred

Our Commitment

#LI-LE1

Salary

CA San Francisco Bay Area Salary Range for this position: $132,000.00 - $276,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Enterprise Data Architect (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a lead Enterprise Data Architect supporting Enterprise Analytics group at Lam Research, you will be responsible for designing and developing the overall data engineering and integration for future state systems. You will be writing the specs and designing the solutions and coordinate with the development team to support the business needs and collaborate with data architecture, business, and development teams. You will also guide application and business development teams in the analytics design of complex solutions and ensure that they are in alignment with the GIS COE data principles, standards, strategies.

What You’ll Do

Job Functions/Duties:

Use leadership abilities to drive process and data, analytics and AI design from discovery through delivery.
Work with Customer Service and GIS stakeholders supporting big data platform program and provide the leadership to define the data strategy and architecture.
Design and develop data engineering functions and data governance specs based on the to-be processes part of the digital transformation.
Engage in the business transformation workshops with SME and identify the data and process gaps and propose a scalable data and analytics architecture to address those gaps.
Leverage current SILK architecture as a data hub for digital transformation program and identify additional tools and services to address the process gaps.
Offer insight, guidance, and direction on the usage of emerging data analytics trends and technical capabilities that will help the digital transformation across the company.
Demonstrate the capabilities and conduct POCs of data and advanced analytics solutions to digital transformation teams to show the potential of the Data Fabric/SILK platform.
Define, maintain, and promote the advanced analytics standards and processes as part of GIS Center of Excellence across the company.
Design advanced Analytics applications using Azure tech stack, MS Fabric, Power BI, Synapse including ETL processes.
Develop collaborative relationships with key business sponsors and IT resources for the efficient resolution of work requests.

Who We’re Looking For

12+ years of experience in working in modern data engineering/data warehousing/data lakes technologies on cloud platforms like Azure, Data Bricks etc.
Must have 5 years of solid experience in using Spark and Python technologies and framework for big data processing
Minimum 3 years of experience in implementing end to end medallion architecture using Databricks or other cloud tools and platforms
5+ years of experience with ETL/ELT tools like, FiveTran, HVR, Kafka or equivalent, Azure ADF etc. for real-time, streaming and batch data ingestion patterns
8+ years of SQL experience in cloud native data warehousing tools with data modeling
Proven experience in schema design and dimensional data modelling
Must have solid knowledge of data warehouse best practices, development standards and methodologies in platforms like MS Fabric, Azure Synapse etc.
Nice to have experience in SAP HANA data structures and related business processes
Strong experience working with and analyzing large datasets, within the relevant domains of IoT and enterprise data
Communication and presentation experience with proven track record of using insights to influence executives and colleagues
Strong Computer Science and Mathematics background preferred
Excellent query writing skill and communication skills preferred
Familiarity with common API’s: REST, SOAP preferred

Our Commitment

IND123 #LI-FC1 #Hybrid

Salary

CA San Francisco Bay Area Salary Range for this position: $132,000.00 - $276,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Process Engineer at Lam, you will operate on cutting-edge technology, harnessing atomic precision, material science, and surface engineering to push technical boundaries. Your role involves developing new and advanced process formulations, defining equipment hardware to meet processing requirements, evaluating test data, and coordinating design requirements to ensure compatibility of processing methods. Your expertise and knowledge play a crucial role our customers success, making an impact on the next generation of semiconductor breakthroughs.

In this role, you will directly contribute to The Etch Product Group.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.

Preferred Qualifications

Research experiences in nanofabrication, familiarity with clean room operation and metrology tools such as SEM/EDX, TEM, XPS, etc for nanostructure characterization.
Fundamental understanding of plasma etching is a plus.
Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.
Great communication skills, self-motivation and demonstrate strong capabilities in solving technical challenges
This is a graduate eligible role.

Our Commitment

#LI-JK1

Salary

CA San Francisco Bay Area Salary Range for this position: $84,000.00 - $185,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Program/Project Manager 4 (Fremont, CA, US, 94538)

The Impact You’ll Make

Reporting into the Global Product Operations organization, the Production Option Architecture team (POA) is key in delivering the Sales Configuration tools that allow our sales teams to accurately configure our product suite as well as drive the correct Bills of Materials (BOMs) to our manufacturing/production line.

As a POA Team member, you will play a pivotal role in developing the tools that support our ability to configure Lam's product suite. You’ll be at the forefront…from early definition of product offerings, through releasing it for our account teams to configure for sale, to generating the buildable product BOMs.

What You’ll Do

The applicant will initially be rotating through the three arms of POA: SAP VC Modeling (Implementing in our ERP Configurator), Product Structure (BOMs tied to Product Offering), and POA Product Management (Product Offering Options). Ultimately the applicant will be assigned to the group that has the most critical need and fits the applicant’s skillset. There are opportunities, over time, for transition to other roles within the POA team.
Initiate and participate in continuous improvement projects (CIP) to improve the efficiency and effectiveness of our team. Provide training support for new business partners in the POA process, roles, and responsibilities.

Minimum Qualifications

The Ideal candidate will have SAP ECC/S4 knowledge, specifically in SAP VC (Variant Configurator), knowledge of Bill of Material structures, Engineering change Processes.
Ability to work both independently and collaboratively in a cross-functional matrix, both technical and non-technical, and with managers and individual contributors.
Problem solving, critical thinking skills, project management skills, ability to analyze data to support decision making both within and outside the organization.
Proficiency with the Microsoft Office Suite of products (Outlook, Excel, PowerPoint, Microsoft Teams, etc).
5 years of experience working in the Semiconductor or similar High Tech manufacturing industry.

Preferred Qualifications

Minimum qualifications plus:
Knowledge of Semiconductor capital equipment
Excellent verbal and written communication skills.
BS/BA equivalent or higher in an Engineering discipline is preferred with 8 years relevant experience. Familiarity with Lam's Product Release or POA process is extremely desirable.
Experience with SAP CRM, Siemens Teamcenter.

Our Commitment

#LI-RSC1

Salary

CA San Francisco Bay Area Salary Range for this position: $89,000.00 - $205,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Product Engineer 4 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

Platform Global Product Support for Etch systems.

The Impact You’ll Make

At Lam, as a Product Engineer, you thrive in high-stakes, dynamic environment, driving product development at the forefront of the semiconductor equipment industry. Collaborating closely with customers and internal teams, you will provide real-time problem-solving to customer challenges and to enhance our products. Your passion for engaging with customers and innovative engineering drives progress in our industry, tackling the once unsolvable.

In this role, you will directly contribute to Improving tool productivity.

What You’ll Do

Actively participate in global platform field escalations, emphasizing Lam platforms on Etch, Deposition and Clean products (some or all).
Acquire and apply engineering theories and problem-solving skills in defining problem, investigation, troubleshooting, analyzing results and providing recommendations to resolution of technical problems.
Conduct and design well defined experiments and tests pertaining to the development of new methods, hardware, standards, modification of current material, components, software or resolution of complex technical problems.
Generate clear and concise reports to justify the technical recommendations.
Take ownership of assigned tasks and projects, assuring proper release and hand-off of solutions to field support organizations.
Highly quantitative, and ability to articulate plans including findings, data collected and progress to Lam’s customers on a regular basis Act as liaison for cross functional projects across organization.

Who We’re Looking For

5+ years semiconductor equipment field support experience, Automation and Robotics experience a plus.
BS degree in Engineering or equivalent, higher engineering degree a plus.
Creative thinking, strong problem solving and troubleshooting capabilities.
Ability to complete projects and learn the required skills with minimal guidance.
Previous experience in individual project management.
Strong oral and written communication skills, including strong presentation skills.
Ability to travel up to 25% of the time.

Preferred Qualifications

Prior product design, Automation and Robotics experience is beneficial.
Experience designing, specifying, building, operating, and maintaining semiconductor, automotive, aerospace, or related hardware, tools, and equipment.
Experience coordinating and communicating with cross-functional teams.

Our Commitment

#LI-SG1

Salary

CA San Francisco Bay Area Salary Range for this position: $100,000.00 - $220,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Supv 2, Logistics (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

Oversees the planning and controls the flow of materials, products, services, and related systems information from point of origin to point of delivery. Areas of responsibility include but are not limited to supply chain services, inventory control, critical parts availability, material handling, import-export licensing, third-party warehousing, and shipping/receiving activities. Develops and implements logistics plans, budgets, and procedures to maximize compliance with customer needs within budget constraints. Provides financial reporting and reconciliation of inventories. Exhibits thorough understanding of international Letters of Credit and other forms of banking documents and international shipments. Interacts with vendors and peers in Manufacturing, Sales, Finance, and Product Development personnel to optimize systems and procedures. Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

What You’ll Do

Oversee and manage the daily operations of shipping, receiving, and inventory control.
Develop and implement efficient logistics strategies to ensure timely and accurate delivery of products.
Coordinate with suppliers, vendors, and transportation companies to ensure smooth and cost-effective logistics operations.
Monitor and analyze key performance indicators (KPIs) to identify areas for improvement and implement corrective actions.
Ensure compliance with all relevant regulations and standards related to shipping, receiving, and inventory management.
Maintain accurate inventory records and conduct regular audits to ensure inventory accuracy.
Lead and mentor a team of logistics staff, providing guidance and support to achieve departmental goals.
Collaborate with other departments to streamline processes and improve overall operational efficiency.
Prepare and present reports on logistics performance to senior management.

Who We’re Looking For

Bachelor's degree or equivalent with 2-4 years of supervisory experience.

Our Commitment

#LI-SG1

Salary

CA San Francisco Bay Area Salary Range for this position: $89,000.00 - $205,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

SEM Technician (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

This position is an exciting opportunity to join Lam's Electron Microscopy team in Fremont, CA.

We operate several generations and models of scanning electron microscopes, including the latest models. Samples are representative of a diverse set of processes from across the integrated circuit (IC) manufacturing process and will provide a dynamic set of challenges and opportunities for growth over the long term.

The Impact You’ll Make

This role offers a unique opportunity to build a rewarding career working with Scanning Electron Microscopes (SEM) in a dynamic, semiconductor-focused environment.

Successful candidates will be well versed in sample imaging for some of the following techniques: Cross Section SEM (XSEM), Electron Dispersive X-Ray Spectroscopy (EDS/EDX), and sample cleaving.

What You’ll Do

Responsible for supporting a variety of semiconductor applications using Scanning Electron Microscope (SEM) to image challenging structures.
Experience in imaging samples on a wafer level taking profile, sidewalls, and top-down images on the SEM.
Some experience with EDS analysis.
Have knowledge on image optimization on the SEM for various materials
Can contribute to the development of best known methods (BKM) for SEM imaging of new applications.
Be able to perform SEM alignments and correct basic fault conditions on metrology equipment.
Must possess good written and verbal communication skills to work with large internal customer base.

Who We’re Looking For

AS/BS in related field of discipline or equivalent.
Minimum 2 years of SEM experience.
Effective communication skills in English, written and verbal.
Proficient in utilizing Microsoft Office software.
Ability to work a shift schedule.

Preferred Qualifications

Associates degree, Technical Certificate in a technical field.
Experience in metrology or related areas.
Experience in semiconductor is a plus.

Our Commitment

#LI-SH2

Salary

CA San Francisco Bay Area Salary Range for this position: $26.44 - $52.40.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Metrology Lab Assistant (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

At Lam, as a Lab Assistant, you play a crucial role in supporting activities of our internal Microscopy services. You will be a part of our Production Control Team, which helps coordinate processes and logistics through the lab, and ensures that our tool operators can work efficiently.

In this role, you will directly contribute to improving Turn Around Time within the lab, avoiding and correcting discrepancies in job details, and working as a liaison between our Microscopy staff and other departments throughout Lam.

What You’ll Do

Work Schedule: 6:00AM - 2:30PM Monday-Friday, Day Shift

Assist in overseeing and maintaining the production processes within the Metrology Department
Manage incoming and outgoing jobs for both internal and external metrology service requests
Coordinate with shipping/receiving teams and couriers
Act as a liaison between the Metrology department and other internal departments
Provide feedback on systems and work towards continuous improvement

Who We’re Looking For

Excellent professional written and verbal communication skills
Experience and proficiency with Microsoft Office (especially Excel)
Adaptive, quick learner, and flexible
Ability to be extremely detail oriented, patient, organized, accountable, and work well in a team environment
Ability to lift ~25 lbs
Fluent English
GED/High School Graduate or above

Preferred Qualifications

AA or higher degree
3+ years of customer service or sales experience
Experience creating SOPs or similar guiding documents for professional use
Experience in a Quality Control role
Experience coordinating with shipping/logistics services
Experience either leading or being part of the roll out of new professional initiatives

Our Commitment

#LI-SH2

Salary

CA San Francisco Bay Area Salary Range for this position: $19.71 - $39.42.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Microscopy Lab Assistant (Fremont, CA, US, 94538)

The Impact You’ll Make

What You’ll Do

Work Schedule: 6:00AM - 2:30PM Monday-Friday, Day Shift

Assist in overseeing and maintaining the production processes within the Metrology Department
Manage incoming and outgoing jobs for both internal and external metrology service requests
Coordinate with shipping/receiving teams and couriers
Act as a liaison between the Metrology department and other internal departments
Provide feedback on systems and work towards continuous improvement

Who We’re Looking For

Excellent professional written and verbal communication skills
Experience and proficiency with Microsoft Office (especially Excel)
Adaptive, quick learner, and flexible
Ability to be extremely detail oriented, patient, organized, accountable, and work well in a team environment
Ability to lift ~25 lbs
Fluent English
GED/High School Graduate or above

Preferred Qualifications

AA or higher degree
3+ years of customer service or sales experience
Experience creating SOPs or similar guiding documents for professional use
Experience in a Quality Control role
Experience coordinating with shipping/logistics services
Experience either leading or being part of the roll out of new professional initiatives

Our Commitment

#LI-SH2

Salary

CA San Francisco Bay Area Salary Range for this position: $19.71 - $39.42.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

SEM Technician (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

This position is an exciting opportunity to join Lam's Electron Microscopy team in Fremont, CA.

The Impact You’ll Make

This role offers a unique opportunity to build a rewarding career working with Scanning Electron Microscopes (SEM) in a dynamic, semiconductor-focused environment.

Successful candidates will be well versed in sample imaging for some of the following techniques: Cross Section SEM (XSEM), Electron Dispersive X-Ray Spectroscopy (EDS/EDX), and sample cleaving.

What You’ll Do

Responsible for supporting a variety of semiconductor applications using Scanning Electron Microscope (SEM) to image challenging structures.
Experience in imaging samples on a wafer level taking profile, sidewalls, and top-down images on the SEM.
Some experience with EDS analysis.
Have knowledge on image optimization on the SEM for various materials.
Have the ability to contribute to development of best-known methods (BKM) for SEM imaging of new applications.
Be able to perform SEM alignments and correct basic fault conditions on metrology equipment.
Must possess good written and verbal communication skills to work with large internal customer base.

Who We’re Looking For

AS/BS in related field of discipline or equivalent.
Minimum 2 years of SEM experience.
Effective communication skills in English, written and verbal.
Proficient in utilizing Microsoft Office software.
Ability to work a shift schedule.

Preferred Qualifications

Associates degree, Technical Certificate in a technical field.
Experience in metrology or related areas.
Experience in semiconductor is a plus.

Our Commitment

#LI-SH2

Salary

CA San Francisco Bay Area Salary Range for this position: $26.44 - $52.40.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Real Estate Portfolio Administrative Support (Fremont, CA, US, 94538)

The Group You'll Be A Part Of

The Impact You’ll Make

Assist with maintaining daily operations of the real estate portfolio of almost 200 locations.

What You’ll Do

Support administrative reporting, track key dates, prepare approvals for new or revised commitments.
Work with business unit as new needs arise or as expiration dates approach.
Work with landlords on ongoing contractual obligations, such as estoppel/SNDA needs, insurance updates, operating expense audit.
Utilize lease administration software system to improve analytics and data collection.

Who We’re Looking For

Minimum of 4 - 6 years of related experience.
Proficient in MS Excel, PowerPoint, and Outlook

Preferred Qualifications

Real estate portfolio and transaction management experience.

Our Commitment

We believe it is important for every person to feel valued, included, and empowered to achieve their full potential. By bringing unique individuals and viewpoints together, we achieve extraordinary results.

Lam Research ("Lam" or the "Company") is an equal opportunity employer. Lam is committed to and reaffirms support of equal opportunity in employment and non-discrimination in employment policies, practices and procedures on the basis of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex (including pregnancy, childbirth and related medical conditions), gender, gender identity, gender expression, age, sexual orientation, or military and veteran status or any other category protected by applicable federal, state, or local laws. It is the Company's intention to comply with all applicable laws and regulations. Company policy prohibits unlawful discrimination against applicants or employees.

Lam offers a variety of work location models based on the needs of each role. Our hybrid roles combine the benefits of on-site collaboration with colleagues and the flexibility to work remotely and fall into two categories – On-site Flex and Virtual Flex. ‘On-site Flex’ you’ll work 3+ days per week on-site at a Lam or customer/supplier location, with the opportunity to work remotely for the balance of the week. ‘Virtual Flex’ you’ll work 1-2 days per week on-site at a Lam or customer/supplier location, and remotely the rest of the time.

#LI-RW1

Salary

CA San Francisco Bay Area Salary Range for this position: $24.52 - $47.60.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer 6 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Mechanical Engineer at Lam, you're designing and defining cutting-edge mechanical and electro-mechanical systems. Your role involves feasibility studies, testing, and guiding teams in detailed design and fabrication. You provide the crucial design information needed to shape our technology's packaging.

Who We’re Looking For

Bachelor’s degree in Mechanical Engineering or related field with 15+ years of experience; or Master’s degree with 12+ years’ experience; or equivalent experience.

Preferred Qualifications

Semiconductor industry experience is not required, but a plus

Our Commitment

#LI-SG1

Salary

CA San Francisco Bay Area Salary Range for this position: $140,000.00 - $302,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Program/Project Manager 5 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Program or Project Manager at Lam, you will play a pivotal role in driving projects/programs for Digital Transformation. You’ll be at the forefront of project initiation through delivery, using your expertise to coordinate cross-functional teams and ensuring projects are completed on time and within budget. In this role, you will directly contribute to the successful digital transformation of our organization.

What You’ll Do

• Lead programs in Digital Transformation (DT) related projects to solve complex business problems.
• Build solutions that will improve business processes and support critical business strategies.
• Provide actionable insights for management to influence decision making through data collection and analysis.
• Develop and deliver clear and concise communications for leadership teams and stakeholders.
• Ensure execution, manage risks, assure adherence to program or project schedules, and performance to meet business requirements.
• Partner with cross-functional stakeholders to continuously improve the process.
• Run change management for projects and programs and support proper project closure.
• Support multiple projects simultaneously, ensuring alignment with strategic goals and timely delivery.
• Utilize Jira for project tracking, testing, cutover, and deployment processes.

Who We’re Looking For

• Bachelor’s degree in Operations Management, Business, Engineering, or related field with 12+ years of experience; or Master’s degree with 8+ years’ experience; or equivalent experience.
• 8+ years of related experience in project management or program management.
• Experience leading cross-functional teams and influencing stakeholders.
• Advanced analytical skills to interpret and utilize data for decision support.
• Ability to manage risks, ensure adherence to project timelines, and deliver projects within scope and budget.
• Proficiency in using Jira, MS Project, ADO for project/test management tasks.
Preferred Qualifications:
• Semiconductor industry or high-tech manufacturing industry experience is a plus.
• Excellent verbal and written communication skills.
• Relevant project management certifications such as PMP, CAPM, Scrum Master and Lean Sigma
Work Mode:
• This is an individual contributor role with an opportunity to influence matrix organization peers and leads
• This role needs local and international travel
• We operate from Lam offices in Fremont, Livermore and expect minimum 3 days on-site for this role

Preferred Qualifications

• Semiconductor industry or high-tech manufacturing industry experience is a plus.
• Excellent verbal and written communication skills.
• Relevant project management certifications such as PMP, CAPM, Scrum Master and Lean Sigma
Work Mode:
• This is an individual contributor role with an opportunity to influence matrix organization peers and leads
• This role needs local and international travel
• We operate from Lam offices in Fremont, Livermore and expect minimum 3 days on-site for this role

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $111,000.00 - $244,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Program/Project Manager 5 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Preferred Qualifications

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $111,000.00 - $244,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Program/Project Manager 5 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Program or Project Manager at Lam, you will play a pivotal role in driving projects/programs for [insert group or strategic initiative]. You’ll be at the forefront of project initiation through delivery, using your expertise to coordinate cross-functional teams and ensure project are completed on time and within budget.

In this role, you will directly contribute to ___.

What You’ll Do

Lead programs [insert group/functional area] related projects to solve complex business problems.
Build solutions that will improve [insert relevant] business processes and support critical business strategies.
Provide actionable insights for management to influence decision making through data collection and analysis.
Develop and deliver clear and concise communications for leadership teams and stakeholders.
Ensure execution, manage risks, assure adherence to program or project schedules, and performance to meet business requirements.
Partner with cross-functional stakeholders to continuously improve the process.
Run change management for projects and programs and support proper project closure.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Supply Chain, Operations Management, Business, Engineering, or related field with 12+ years of experience; or Master’s degree with 8+ years’ experience; or equivalent experience.
8+ years of related experience in project management or program management
Experience leading cross-functional teams and influencing stakeholders.
Advanced analytical skills to interpret and utilize data for decision support.

Preferred Qualifications

Semiconductor industry or global supplier experience is a plus.
Excellent verbal and written communication skills.
Relevant project management certifications such as PMP, CAPM, Scrum Master, or PRINCE2.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $111,000.00 - $244,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Sr. Mgr, Etch Technologist (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

Leads cross-functional teams that are focused on the delivery of Etch solutions for customers in specialty technologies and advanced packaging. Develops, defines and executes project plans, schedules, and deliverables. Interface with external customers and field-based employees on technical matters. This position is most common in a matrix type organization, where the position has overall customer technical engagement responsibility, i.e. coordinating efforts leading to Etch product and process solutions.

What You’ll Do

•   Identify customer technology trends and requirement
•   Drive application-specific etch product strategy
•   Technical management of new business opportunities
•   Lead etch solution development with engineering team, account team and customer to include preparation, alignment and management of projects
•   Coordinate account team and customer meetings
•   Technical marketing presentations
•   Provide update of project status and direction to management and executives team
• Provide Spec responses

Who We’re Looking For

Thorough understanding of various etch applications
Understanding of specialty technology (Photonics, CIS, Power, Analog, RF, MEMs, emerging memory)
Understanding of etch processes and hardware-process interactions
Excellent communication and organizational skills
Strategic thinking
Conversant in customer integration challenges
Collaborative spirit in working with cross functional teams

Preferred Qualifications

> 8 year experience in etch processes and products for semiconductor manufacturing
Ph.D., MS or Bachelor degree in Chemical Engineering, Chemistry, Material Science/Engineering, Electrical Engineering, Physics, Mechanical Engineering

Our Commitment

#LI-LE1

Salary

CA San Francisco Bay Area Salary Range for this position: $140,000.00 - $302,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

SharePoint, PowerPlatform, and Microsoft Licensing Senior Analyst (Fremont, CA, US, 94538)

The Impact You’ll Make

We are seeking a dynamic leader to expand and modernize our SharePoint Online capabilities across North America and Europe. The ideal candidate will be a passionate evangelist for advanced collaboration, blending cutting-edge technologies such as artificial intelligence, automation, and modern workflow solutions with a strong business analysis mindset. In addition to elevating our SharePoint experiences, this role will serve as the Business Analyst for SIP, our labeling solution powered by Azure Information Protection, and will manage key aspects of our Microsoft Enterprise Agreement, including contract governance, license planning, distribution, and budget management.

What You’ll Do

Key Responsibilities:

Digital Collaboration & Innovation:

Champion and expand SharePoint Online capabilities, implementing advanced features like AI-driven insights, automation, and streamlined workflows.
Evangelize modern collaboration methods across business units and drive adoption of new tools through training sessions and best practices.

Business Analysis & Requirements Gathering:

Partner with business users to understand, document, and translate business requirements into detailed, actionable technical specifications.
Collaborate with developers and business partners to conceptualize, design, and execute solutions that enhance ease-of-use and drive productivity.
Ensure that quality assurance processes are maintained throughout release cycles.

SIP (Labeling Solution) Leadership:

Serve as the primary business analyst for SIP, working closely with engineering, compliance, and security teams to enhance the solution based on Azure Information Protection.
Analyze current labeling methodologies, gather stakeholder feedback, and propose iterative improvements to meet evolving security and compliance demands.

Enterprise Agreement Governance and Financial Oversight:

Oversee Microsoft Enterprise Agreement contract governance, ensuring accuracy in license planning, distribution, and compliance with corporate guidelines.
Collaborate with the wider IT team for license planning, quoting and procurement.
Engage in budget planning and cost optimization initiatives, providing detailed forecasts and usage reports that facilitate informed decision-making.

Who We’re Looking For

Technical Expertise:

Proven experience administering SharePoint Online and the broader Microsoft 365 ecosystem—with an emphasis on integrating AI, automation, and workflow solutions into collaborative environments.
Hands-on experience with Azure Information Protection solutions, including SIP or similar labeling tools.
Familiarity with PowerShell, Office 365 CLI, or related technical administration tools is highly preferred.

Business Analysis Acumen:

Understanding and documenting business processes, associated details and rules.
Demonstrated experience in gathering business requirements, process mapping, and translating technical specifications into tangible project deliverables.
Exceptional communication skills that facilitate effective collaboration across technical, business, and executive teams.

Governance and Financial Planning:

Experience managing enterprise-level contracts, license planning, and contract compliance—ideally within the framework of a Microsoft Enterprise Agreement.
Strong competency in financial forecasting, budgeting, and cost management linked to technology procurement and software licensing.

Soft Skills:

Strategic thinker with an innovative approach to problem solving.
Ability to collaborate and drive tasks to conclusion.
Self-starter that is motivated to do the right thing.
Excellent stakeholder management skills, with the ability to influence and drive change across geographically diverse teams.

Preferred Qualifications

Experience with Manufacturing company
Bachelor’s or Master’s degree in Business, Information Technology, or a related field.
Certifications in SharePoint Administration, Microsoft 365, or relevant AIP/Azure credentials.
Experience in roles that blend business analysis with technical project management in global settings.

Our Commitment

IND123 #LI-FC1 #Hybrid

Salary

CA San Francisco Bay Area Salary Range for this position: $89,000.00 - $205,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Global Product Support Engineer 4 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Global Product Support Engineer at Lam, you are the backbone of technical support for field engineers, technicians, and product support personnel. Your expertise is crucial in diagnosing, troubleshooting, repairing, and debugging complex semiconductor equipment. Your swift action in responding to situations is critical in resolving issues and ensuring the satisfaction of Lam’s valued customers

What You’ll Do

Escalations
Primary escalation point for Type-3 tickets.
Drive escalation resolution across CFT (SQAD, HW, Process, and KAT).
Secondary escalation point for Type 1-2 ES when pulled in by RPS.
Provide support by phone and travel if needed.

New product Introduction
Primary resource for first in fab and first in region installs
Shared responsibility for JDP and Beta install and support
Participate in embedded training to gain knowledge

Account/ Customer Interaction Travel
Prepares and delivers update on programs and issues to customer technical teams.
TRM's, quarterly reviews, etc.
Provides onsite project management support for critical penetrations and escalations
Chairs weekly meeting with key customer accounts to communicate progress on projects and collect information on issues effecting performance
Customer focused but dedicated to a specific account

Travels as required to support projects and products in the field, estimated 50% annually

Who We’re Looking For

Minimum of 8 years of related experience with a Bachelor’s degree; or 6 years and a Master’s degree; or a PhD with 3 years experience; or equivalent experience.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $100,000.00 - $220,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Product Manager 3 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Product Manager at Lam, you play a crucial role in defining the strategy, roadmap, and features of the product. You will need to be both strategic and tactical. You will oversee the entire product life cycle, from definition and planning to production release, upgrades, and end-of-life. Your leadership will be crucial for cross-functional collaboration and the success of our product portfolio. With your expertise in both business and technical domains, you’ll bring the product vision to life for Lam and our customers.

What You’ll Do

Manages a group of products from product definition and planning through development, ramp, sustaining, and end of life. Serves as the central resource for other Lam organizations, including engineering, technology, manufacturing, supply chain, and marketing. Leads and aligns the business unit on priorities, objectives, and decisions to meet product requirements.

The Product Manager is responsible for managing the entire product line life cycle from strategic planning to tactical activities. Key responsibilities include:

Managing New Product Development, Roadmaps, and CIP:

Author vision statements, document business objectives, and product requirements.
Define the product offering within the Product Option Architecture (POA) and manage associated change processes. Communicate product offerings and list pricing to internal organizations.
Drive strategies to minimize configurability, maximize commonality, and implement new CIP.
Ensure the product meets performance targets, is available in manufacturing with predictable lead-time and cost, and is supportable in the field.

Product Change, Quality, and Profitability Management:

Ensure that products and CIP meet performance targets, are available in manufacturing with predictable lead-time and cost, and are supportable in the field with documentation, training, and materials.
Define implementation strategies for product enhancements, improvements, and fixes, and communicate these to stakeholders.
Manage unreleased products and features; communicate early forecast plans with all stakeholders and manage/coordinate financial approvals.
Work with Sales Operations to ensure proper tool configurations and communicate build plans within the business unit to ensure alignment for CIP.

Who We’re Looking For

Minimum of 5 years of related experience with a Bachelor’s degree; or 3 years and a Master’s degree; or a PhD without experience; or equivalent work experience.

Preferred Qualifications

The ideal candidate will have sound judgment and decision-making capability. They should also demonstrate the capacity to provide structure and guidance and work effectively across multiple organizations and levels of management. This person must possess a blend of business and technical savvy, big-picture vision, and the drive to make that vision a reality. The product manager must have the confidence to lead a team of highly technical and competent individuals.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $84,000.00 - $185,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Financial Analyst 4 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

[[GPG Central R&D Finance]]

The Impact You’ll Make

This Senior Financial Analyst will provide financial support and expertise to the company's Central R&D Support Group including financial forecasting, analysis, and accounting/technical support. In this role, you will provide direct financial oversight to over $200M operating and capital budget. With direct access to VP level executives, this individual provides budgetary oversight as well as analytical support for management decisions.

What You’ll Do

Manage financial forecast process and reporting
- Coordinate all aspects of financial planning and reporting, Guide and educate business partners in the preparation of annual operating budgets. Perform periodic updates.
- Present budget and analysis in a comprehensive and easy-to-understand format. Interprets financial results. Assess risks and opportunities. Offer suggestions.
- Perform scenario analysis.
Perform monthly/quarterly close processes. Analyze actual operating results and identify key financial and operating issues.
Responsible for Balance Sheet Review process. Prepare account reconciliations, account variance analysis, and other schedules as required.
Assist with requests related to internal/external audits and Sarbanes-Oxley compliance
Participate in ad-hoc projects and deep-dive analyses. Provide insights to assist business decision-making.
Initiate and drive continuous process improvements.

Who We’re Looking For

Bachelor’s degree in Finance/Accounting required. Master’s degree preferred.
Minimum of 5 years of experience in accounting, finance or financial management
Industry knowledge not required, but preferred
Attention to details and demonstrated critical thinking and problem-solving skills.
Excellent interpersonal skills with ability to develop and maintain business partner relationships at all levels of the organization.
Collaborative team player
Ability to manage tight deadlines, prioritize workload; effective multi-tasking skills are vital.
Excellent communication and presentation skills, written and verbal.

Preferred Qualifications

Foundational understanding of US GAAP.
Prior experience within technology, manufacturing, or related industries.
Advanced analytical, financial modeling, and reporting skills.
SAP and Business Objects experience is highly desirable or demonstrable strong systems skills.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $89,000.00 - $205,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Technical Program Manager 6 (Fremont, CA, US, 94538)

The Impact You’ll Make

Summary
As a Technical Program Manager within the Engineering Leadership Team at Lam Research, you will oversee a range of engineering initiatives that span multiple product groups. Your primary focus will be driving programs that accelerate and enable engineering capabilities across all Lam engineering teams. Key deliverables include accelerating product development and preparing engineering for a digital future to deliver positive business outcomes. This role is highly visible and entails collaboration with various internal stakeholders and leading technical teams to achieve business objectives.

What You’ll Do

Key Responsibilities

Manage technical programs to drive cross-functional efforts within a matrix organization in the following areas:
- Engineering product development
- Engineering process improvements
- Engineering operations
- Engineering enterprise applications
- CAD automation
- Product lifecycle management projects and integrations
Deploying digital technologies, including artificial intelligence.
Serve as a change agent for digital / AI initiatives related to engineering.
Oversee program scope, schedule, and resource management.
Handle program escalation management.
Collaborate with internal customers, subject matter experts, and other program managers to achieve program objectives.
Conduct program reviews.
Analyze, monitor, and course correct program deliverables relative to plan and ROI.
Capable of working with stakeholders across various global time zones and leadership levels.

Who We’re Looking For

Skills Requirements

Strong engineering background with product development in complex, configure-to-order products (e.g., semiconductor manufacturing, automotive, aerospace).
10+ years of experience with the combination of engineering and technical program management.
Has managed large cross-functional programs. Encompassing: NPI programs, business process, software enterprise solutions.
Methodical program management approach.
Skilled at operating under ambiguity in matrix organizations.
Experienced in driving digital initiatives (Big data, connected data, protected data, data visualization, data analytics, and use of automation techniques).
Technical expertise in data analytics, AI concepts, Generative AI, enterprise search products.
Knowledge of MBSE and MBD is a plus.
Able to present to executive leadership.
Willingness to work with distributed teams across global time zones.
Innovation mindset.

Preferred Qualifications

Education

Bachelor’s degree in mechanical or electrical engineering or other related technical subject area.
MBA – Preferred.
Program Management certification e.g. PMP – Preferred.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $140,000.00 - $302,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 4 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Partner cross-functionally and with customers to understand roadmaps, process flow, inflection points, requirements, and business challenges.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 6+ years of experience; or a PhD with 3+ years’ experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $100,000.00 - $220,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Product Engineer 4 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Collaboratively engineer innovative semiconductor equipment and process design solutions to quickly resolve customer issues and improve product quality in a dynamic fast-paced challenging environment.
Apply engineering theories and problem-solving skills in defining problem, investigation, troubleshooting, analyzing results, and providing recommendations to resolution of technical problems.
Supports product development from product prototyping, development, deployment/product release, and initial field support.
Design and conduct experiments, tests, and prototypes to resolve complex technical problems.
Present analysis and support technical recommendations clearly and concisely.
Collaborate with cross-functional and cross-cultural teams to guide the specification and development of products.
Provides technical support for installation and/or diagnosing, troubleshooting, repairing, and debugging complex product issues.
Maintain a high degree of customer engagement including face-to-face and international travel to customer sites supporting near term product releases and solve customer issues.
Work in a cleanroom lab and/or customer semiconductor fab environment.

Who We’re Looking For

Minimum Qualifications:

Bachelors degree (+8 years experience), Masters degree (+6 years experinece), or PhD (+3 years of experience) in Material Science, Electrical Engineering, Mechanical Engineering, Optics, Physics, Chemistry, Chemical Engineering, or related field; or equivalent experience.
Interest in semiconductor equipment design and trouble-shooting.
Exceptional analytical and experimental design skills.
Creative thinking, problem solving, and troubleshooting capabilities.
Exceptional clear communication and presentation skills (including technical writing and verbal presentations).
Comfortable traveling up to 25% of the time.

Preferred Qualifications

Experience working in robotics/mechatronics.
Experience working on metals deposition.
Prior product design and technical engineer experience is beneficial.
Experience designing, specifying, building, operating, and maintaining semiconductor equipment.
Experience coordinating and communicating with cross-functional teams.

Our Commitment

#LI-SG1

Salary

CA San Francisco Bay Area Salary Range for this position: $100,000.00 - $220,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Laboratory Service Engineer 4 (Fremont, CA, US, 94538)

The group you’ll be a part of

The impact you’ll make

As a Laboratory Service Engineer at Lam, you're a pivotal force in maintaining and upgrading equipment in our applications lab. It’s not the typical lab; you’ll be hands-on with state-of-the-art equipment performing maintenance, troubleshooting, and calibration. You'll support innovative equipment providing installation and documentation, making you an integral part of our technology’s success.

In this role, you will contribute to concept and feasibility hardware to enhance current and develop next generation of semiconductor equipment for our customers.

What you’ll do

Operate in an R&D environment performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required Personal Protective Equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who we’re looking for

Minimum Qualifications:

Bachelor’s degree in a technical field with 8+ years of experience; or Associates degree in a technical field or equivalent military training with 10+ years of relevant experience; or equivalent work experience.

Preferred qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $37.02 - $80.77.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

MS Dynamics 365 Functional Architect (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

GIS is looking for a Dynamics Functional Architect who designs and implements Microsoft Dynamics 365 solutions by deeply understanding business needs, translating them into functional specifications, and configuring the system to meet those requirements, including data mapping, workflow design, and customization(PCF), while collaborating closely with technical teams to ensure seamless integration and delivery of a tailored solution across various Dynamics modules like Sales and Services and Scheduling.

What You’ll Do

Collaborate with business stakeholders, analyze business requirements, identify suitable Dynamics 365 modules, and design comprehensive solutions including data mapping, workflow automation, customizations, and integrations with other systems.
Provide technical guidance to development teams, ensuring adherence to best practices, coding standards, and architectural principles for Dynamics 365 implementations.
Configure Dynamics 365 modules, including fields, views, security roles, business rules, and workflows to meet specific client needs.
Design and implement integrations between Dynamics 365 and other enterprise applications using APIs, connectors, and custom development where necessary.
Develop data migration plans, including data cleansing and transformation processes, to successfully transfer data from legacy systems to Dynamics 365.
Build prototypes and demonstrations to showcase the potential of Dynamics 365 solutions and validate design concepts with stakeholders.
Ensure that the solution meets security and compliance requirements.
Collaborate with business users, project managers, and other technical teams to gather requirements, manage expectations, and communicate project progress.
Troubleshoot technical issues and provide solutions to technical problems.

Who We’re Looking For

7-10 Years experience with Microsoft Dynamics365.
Solid Understanding on the Field Service Module/scheduling in Dynamics.
5–7-year experience in configuration/customization of the Dynamics Field Service Module.
3–4-year experience on PCF custom design on Microsoft Dynamics 365.
Proficiency in .NET development, C#, JavaScript, Power Automate, Power Apps, JavaScript, jQuery, XML, Azure DevOps and other relevant technologies for customization and integration.
Experience with SAP a plus.

Our Commitment

IND123 #LI-FC1 #LI-Hybrid

Salary

CA San Francisco Bay Area Salary Range for this position: $111,000.00 - $244,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Product Engineer 5 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

At Lam, you'll be part of is a growing Global Product Support Engineering team working with Lam's Mechatronics Engineering, Supplier Engineering, and Field Engineering teams, supporting a wide range of robotics products to our end user customers globally.

The Impact You’ll Make

In this role, you will directly contribute to the Global Products Engineering group at Lam Research.

What You’ll Do

Actively participate in global platform field escalations, emphasizing in Lam platforms on Etch, Deposition and Clean products. Wafer Handling / Robotics experience required Analyze research data and product specifications.
Acquire and apply engineering theories, methods and research techniques in the investigation, troubleshooting, and resolution of technical problems.
Conduct and design well defined experiments and tests pertaining to the development of new methods, processes, hardware, standards, modification of current material, components, software, or process specifications and the resolution to complex technical problems Responsibility includes instituting and owning corrective actions and following through to assure proper release and hand off of solutions to Technical Services and Field Process/Field Service organizations Highly quantitative, and ability to articulate plan including findings, data collected and progress to Lam’s customers on a regular basis

Who We’re Looking For

5+ years’ semiconductor equipment experience
Direct experience in semiconductor mechatronics product support a plus BS degree in Engineering or equivalent, MS degree or PhD a plus
Strong oral and written communication skills, including strong presentation skills
Ability to travel up to 30%

Preferred Qualifications

Prior robotics, product support, and technical engineer experience is beneficial.
Working knowledge of Statistics Process Control (SPC), Design of Experiments (DOE), Failure Mode and Effects Analysis (FMEA), Root Cause Analysis (RCCA), 8D and 5Why Problem Solving.
Understanding GD&T and commonly used drawing standards.
Experience designing, specifying, building, operating, and maintaining semiconductor, automotive, aerospace, or related hardware, tools, and equipment.
Experience leading cross-functional teams.
Experience with customer communications a plus.
Individual and team contributor with go getter attitude and self-drive and motivation.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $119,000.00 - $259,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Laboratory Service Engineer 2 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will contribute to concept and feasibility hardware to enhance current and develop next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required Personal Protective Equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in a technical field with 2+ years of experience; or Associates degree in a technical field or equivalent military training with 4+ years of relevant experience; or equivalent work experience.
This is a graduate eligible role.

Preferred Qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our Commitment

#LI-SH2

Salary

CA San Francisco Bay Area Salary Range for this position: $53,000.00 - $122,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to The Etch Product Group.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

#LI-JK1

#IND123

Salary

CA San Francisco Bay Area Salary Range for this position: $84,000.00 - $185,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to The Etch Product Group.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

#LI-JK1

#IND123

Salary

CA San Francisco Bay Area Salary Range for this position: $84,000.00 - $185,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

PhD in Materials Science, Chemical Engineering, or Chemistry with no previous professional experience or related field with 1+ years of experience.

Preferred Qualifications

A strong background in chemistry with in-depth expertise in materials synthesis, chemical reaction processes, and thin film characterization; experience with materials characterization is a plus.
Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Reactive Ion Etching (RIE) and Atomic Layer Etching (ALE)
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

#LI-JK1

#IND123

Salary

CA San Francisco Bay Area Salary Range for this position: $84,000.00 - $185,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Dynamics Developer (Fremont, CA, US)

The Group You’ll Be A Part Of

The Impact You’ll Make

Lam Research is looking for an experienced Dynamics Developer to be part of an IT team supporting Lam’s CSBG Business Unit. This position’s primary responsibility is to take ownership of designing, developing, and implementing solutions within the Microsoft Dynamics 365 ecosystem. The ideal candidate will possess a deep understanding of Dynamics 365 architecture and capabilities, along with strong technical expertise in customization, configuration, and integration to meet business requirements. This individual will need to have excellent communication skills, determination, and perseverance to be successful.

What You’ll Do

Develop and customize Microsoft Dynamics 365 applications to align with organizational goals.
Collaborate with business stakeholders to gather and analyze requirements.
Implement integrations between Dynamics 365 and third-party systems.
Optimize application performance and provide technical troubleshooting.
Maintain system documentation and ensure proper version control.
Stay updated on Dynamics 365 platform updates and new features.
Provide ongoing support, including bug fixes and enhancements.
Configure Dynamics Security
Ensure Dynamics Deployments are scalable and supportable
Follow industry best practices weighing customization vs default features
Manage Deployments and troubleshoot Dependency Issues.
Guide and mentor other Dynamics Consultants
Perform Code reviews and Design Reviews for Dynamics 365 User stories.
Allocate user stories within the team
Validate efforts and plan the Sprint
Ensure Sprint Deadlines are met
Configure Dev Ops Pipelines
Audit Security, Roles, and Service Users used in the MS Dynamics Environment
Execute Cutover in Production for MS Dynamics.
Validate and Activate Power Automate Flows and Power Apps in Production after deployment.

Who We’re Looking For

Must have good expertise in plugins, actions and workflows
Must be Proficient in developing plug-ins, workflows and actions.
Must be proficient in JavaScript for implementing MS Dynamics UI customizations.
Must have expertise in understanding the overall Dynamics 365 architecture.
Design and Deploy all integrations with MS Dynamics environment.
Must have developed components in PCF using react.js
Should be well versed connectors within power automates.
Should be well-versed with Canvas apps and custom pages.
Must be proficient in JavaScript for implementing MS Dynamics UI customizations.
Must be proficient in MS Dynamics Configurations like Entities, Business Rules, Forms, Views, etc.
Must be aware of agile processes.

Required Qualifications

BS or Higher Degree in Computer Science or related field with a minimum of seven (7) years of IT experience.

Preferred Qualifications

Self-directed, responsive, and dedicated to exceptional customer support.
Ability to articulate ideas clearly with exceptional organizational, presentation, and communication skills – both verbal and written.
Must have excellent organizational and time management skills and the ability to deliver products with high quality and within prescribed timelines.
Must be able to interact professionally with the users of all our systems.
Experience in integration with SharePoint is good to have.
Experience in Admin-related activities.

Our Commitment

IND123 #LI-FC1 #Hybrid

Salary

CA San Francisco Bay Area Salary Range for this position: $89,000.00 - $205,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Fremont, CA)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to the growth of our CTO organization at Lam Research.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.
This is a graduate eligible role.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $98,000.00 - $181,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Fremont, CA)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to our Office of the CTO team.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.
This is a graduate eligible role.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $98,000.00 - $181,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Fremont, CA)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to our Office of the CTO team.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.
This is a graduate eligible role.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $98,000.00 - $181,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 5 (Fremont, CA)

Responsibilities:

A Process Engineer 5 will lead, and is personally accountable for, high profile project timelines and milestones. They will manage projects for product development, including various productivity initiatives (MWBC, chamber matching, variability) as well as designing and conducting independent experiments and validating solutions via the ironman methodology.

Lead cross-functional teams consisting of business development, engineering, manufacturing, processing engineering, field service, and suppliers during new product development launch through to production release.
Be a leader for problem-solving skills: defining the problem, identifying objectives, assessing risk, developing approach, analyzing results and providing recommendations Coordinate development activities with suppliers and product groups Implement industry standard process control techniques such as six sigma techniques to manage and develop production efficiencies and quality.
Develop continuous improvement plans (CIP) on existing manufacturing processes to increase first pass yield.
Be the chief advocate for your product across company organizations.

Qualifications:

Minimum of 10 + years applicable experience and manufacturing processes and design, preferably in the semiconductor industry preferred BS/MS degree in a technical field listed (but not limited to) the following: M.E., E.E., ChE, Chemistry, Mat Sci., Physics, Comp. Sci. or related field; Advanced degree PhD desirable, but level of work experience also considered.

Strong project management, communication, analytical, and problem-solving skills Working knowledge of Statistics Process Control (SPC), Design of Experiments (DOE), Failure Mode Effect Analysis (FMEA), Root Cause-Corrective Action (RCCA), 8D & 5- Whys Problem solving.
Prior experience with MS office tools (ppt, excel, project), statistical tools (JMP, Minitab etc.)
Strong multi-tasking ability to manage a variety of projects with changing priority.
Demonstrated strong customer management and presentation skills Previous experience leading cross-functional projects Comfortable with travelling.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits. Discover more at www.lambenefits.com

CA San Francisco Bay Area Salary Range for this position: $140,000.00 - $259,000.00

The above salary range for this position is relevant to applicants that reside or work onsite in the California, San Francisco Bay Area only. Salary offers will depend on factors that include the location you work from, your level, education, training, specific skills, years of experience and comparison to other employees already in this role. Actual salary may vary from salary offered due to numerous factors including but not limited to unpaid time off, unpaid leave, company mandated shutdown, and other relevant factors.

Mechanical Engineer 3 (Fremont, CA)

The Impact You'll Make

What You'll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, analysis, development, and test/validation.
Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis including structural analysis, finite element analysis (FEA), thermal analysis, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify new and existing designs.
Develop conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, analysis, and validation to a diverse audience in design reviews.
Collaborate closely with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.

Who We're Looking For

Minimum Qualifications

Bachelor’s degree in Mechanical Engineering or related field with 5+ years of related experience; or Master’s degree with 3+ years; or equivalent work experience.
Excellent oral and written communication and technical presentation skills.
Proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills

Preferred Qualifications

Experience in Semiconductor industry is a plus.
Experience in project management, leading projects, or problem solving while managing time and multiple priorities.

#LI-HC2

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits. Including:

Competitive compensation package
Employee stock purchase plan
Comprehensive medical, dental, and vision plans
Supportive resources for growing families including parental leave
Student loan assistance and education assistance

CA San Francisco Bay Area Salary Range for this position: $82,000.00 - $181,000.00

Electrical Engineer 3 (Fremont, CA)

The Impact You’ll Make

Join Lam as an Electrical Engineer and you'll be at the forefront, designing and developing electronic solutions for advanced application. Your role involves designing, analyzing equipment, conducting experimental test, evaluating results to create reliable cutting-edge solutions.

What You’ll Do

Design and develop complex electrical systems, sub-systems, and solutions, applying engineering methods to design.
Contributes to research and development efforts by collecting and analyzing data use it to inform and improve electrical system designs.
Exhibit sound judgment in developing functional specifications for electrical/ electro-mechanical systems and power distribution components.
Collaborate with engineering design teams to design and modify custom and OEM system components, fostering a cross-functional approach to innovation.
Hands-on test and validation utilizing lab equipment to characterization of the performance of the electrical/ electro-mechanical systems.
Prepare high-quality reports and technical presentations to clearly communicate design intent, analysis, and results to a diverse audience in design reviews.

Who We’re Looking For

Minimum Qualifications

Bachelor’s degree in Electrical Engineering or related field with 5+ years of related experience; or Master’s degree with 3+ years’ experience; or equivalent work experience.
Hands-on experience in electronic circuit design (analog, digital), development and associated electrical board design, troubleshooting and validation.
Understanding of AC/DC Power distribution systems.
System level understanding of Electrical architecture, system integration, and applications.
Working knowledge in Printed Circuit Board (PCB) and low voltage circuit design for power and control applications.
Expertise in application of power and controls technologies for systems automation.
Knowledgeable in CAD tools for circuit design and simulation (e.g., PCAD, ORCAD, ZUKEN, AutoCAD, Spice, ADS, HFSS).
This is a graduate eligible role.

Preferred Qualifications

Ability to define functional requirements and execute in a dynamic team environment.
Familiar with design for serviceability, manufacturability, reliability.
Proficient at troubleshooting systems with tools like network sniffers, protocol analyzers, and tool logs.
Experience in troubleshooting with problem-solving techniques such as 5-why, 8D, fishbones, etc.
Experience in semiconductor industry or related (industrial, automotive, military)

#LI-HC2

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits. Including:

Competitive compensation package
Employee stock purchase plan
Comprehensive medical, dental, and vision plans
Supportive resources for growing families including parental leave
Student loan assistance and education assistance

CA San Francisco Bay Area Salary Range for this position: $95,000.00 - $176,000.00

Process Engineer 2 (Fremont, CA)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to the Etch Product Group.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 2+ years of related work experience; or an advanced degree without experience; or equivalent work experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $70,000.00 - $115,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 4 (Fremont, CA)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to the Etch Product Group.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 8+ years of related work experience; or a Master’s with 6+ years experience; or a PhD with 3+ years experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $84,000.00 - $185,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

IT Asset Management and CMDB Process Owner 1 (Fremont, CA, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

Lam Research is seeking an experienced IT Asset Management and Configuration Management Database (CMDB) Process Owner to join our dynamic IT Service Management (ITSM) and ServiceNow team. This is a new role within the company, structured under Lam’s ITSM team, and encompasses a wide range of responsibilities, from high-level strategy to detailed troubleshooting. You will be setting strategies for Hardware and Software Asset Management and addressing specific issues impacting individual Configuration Items (CIs). We are looking for someone with balanced experience in Hardware and Software Asset Management, including end-user devices, infrastructure, software metering, Application Portfolio Management, and CMDB.

Join our high-performing team and be a critical thought leader and advisor across various teams, including end-user device management, infrastructure, and vulnerability management.

What You’ll Do

Engage with service owners and stakeholders across Infrastructure, Deskside Support, and Vulnerability Management to evaluate and improve Asset Management processes.
Promote and oversee the implementation of process and system improvements.
Collaborate with ServiceNow team members to resolve issues with incorrectly structured CI metadata.
Develop and communicate Asset Management policies and represent them during audits (SOX, ISO, etc.).
Report asset and CMDB metrics to IT and InfoSec leadership.
Partner with Organizational Change Management (OCM) to train stakeholders on processes and systems.

Preferred Qualifications

Familiarity with the Common Service Data Model (CSDM).
Experience in ServiceNow development or working closely with a ServiceNow development team.
Working knowledge of ServiceNow Discovery and Microsoft Intune.
Experience with integrations across multiple platforms to facilitate asset management (e.g., tools for endpoint management, endpoint disablement, CI discovery, authentication & authorization).

Our Commitment

IND123 #LI-FC1 #LI-Hybrid

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Mechanical Engineering or related field with 5+ years of experience; or Master’s degree with 3+ years; or equivalent experience.
Excellent communication, both written and verbal, and technical presentation skills.
Highly proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills.

Preferred Qualifications

Experience in Semiconductor industry is a plus.
Experience in project management, managing projects, or problem solving while managing time and multiple priorities.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Electrical Engineer 5 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

Join Lam as an Electrical Engineer! We are seeking an experienced Electrical Engineer to join our team, focusing on the design and development of power supplies for thin-film deposition. This role involves the creation, integration, and support of advanced power solutions for wet deposition products.

What You’ll Do

Subject Matter Expert in the plating circuit design, system operation, and interface for wet deposition products.
Develop efficient and cost-effective power supply solutions per stakeholder and design requirements.
Create functional specifications and requirement documentation packages to support development programs.
Create and execute test plans to characterize and validate power supply performance.
Develop models, simulation tools, and other predictive methods to reduce changes on subsequent design iterations.
Conduct testing, development, and debugging of power supply units.
Perform product verification and validation tests.
Actively engage with suppliers. Become a unit design and operational expert. Ensure reliability at the design level.
Product lifecycle management: Create part numbers, documents, and Bills of Materials (BOM).
Develop reliability roadmaps and execute to meet requirements (HASS/HALT/MTBF targets).
Some travel as necessary. Supplier support and customer escalation.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electrical Engineering or related field with 12+ years of experience; or Master’s degree with 8+ years’ experience; or equivalent experience.
In-depth knowledge of key components for switch-mode power supply circuits and topologies.
Experience in DC-to-DC high voltage and high-power design.
Detailed knowledge of flyback, forward, half-bridge, resonant converters, and control loops.
Familiarity with industry standards:
- SEMI Standards
- NFPA 79
- ETL 61010/EMC 61326
Strong project management skills.
Good understanding of firmware design for power supply requirements.
Knowledgeable in circuit operation and failure analysis.
Knowledge of industrial Quality Systems, Engineering Design & Documentation, Product Qualification, and Change Processes.
Experience with Printed Circuit Board (PCB) assembly, inspection, and test.

Preferred Qualifications

Experience in power distribution and/or control system design of industrial manufacturing tools.
Experience with semiconductor manufacturing and equipment.
Ability to define functional requirements and execute in a dynamic team environment.
Ability to create and implement test fixtures to verify and validate designs.
Ability to manage by influence.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Technical Program Manager 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Product Change Program Manager at Lam, you are not just overseeing projects – you’re orchestrating breakthroughs in support of Product Change Management. You’ll create, maintain, and enforce centralized standards, promote reuse and forward-compatibility in design changes, and be relied upon for expertise in change management.

What You’ll Do

Scope and execute project requests and provide support to upstream and downstream partners for the furtherance of projects for the Product Option Architecture (POA).
Provide end item creation and bill of materials maintenance.
Successfully navigate multiple projects in a dynamic environment.
Provide support to teams needing subject matter expertise for POA.
Take ownership and accountability for the success of projects and cross-functional teams to ensure program schedules, performance metrics, and delivery meet business requirements on time and within budget.
Participate in Continuous Improvement projects from inception to impactful results.
Perform data collection and statistical analysis, and report results to inform program schedules and deliverables.
Influence cross-functional stakeholders to continuously improve processes and inspire alignment.

Who We’re Looking For

Bachelor’s degree with 5+ years of experience; or a Master’s degree with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.
3+ years of continuous improvement or technical program management.
Experience guiding cross-functional teams and demonstrating influence skills to deliver results.
Excellent communication and presentation skills with the ability to present to audiences at all levels in the company.

Preferred Qualifications

Knowledge of change management methodologies is required.
CAD experience, particularly with CREO and Teamcenter, is a bonus.
SAP experience or familiarity with another ERP system is preferred.
Familiarity with project management software and tools, including MS Project, QuickBase, Visio, Planner, MS Teams, or equivalent, is essential.
Knowledge of program management methods and experience in product development and release (PDR) procedures is necessary. Relevant project management certifications such as PMP, CAPM, Scrum Master, or PRINCE2 are required.
Experience in or knowledge of semiconductor fabrication, semiconductor equipment operations, or related industries is a plus. Lean Six Sigma methodology or certification (Green Belt, Black Belt) is also a plus.

Our Commitment

#LI-MN1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Technical Program Manager 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Deliver change management for programs that are sustainable and maintain long-term success.
Successfully navigate multiple projects in a dynamic environment.
Provide support to teams needing subject matter expertise in change management.
Take ownership and accountability for the success of projects and cross-functional teams to ensure program schedules, performance metrics, and delivery meet business requirements on time and within budget.
Participate in continuous improvement projects from inception to impactful results.
Perform data collection and statistical analysis, and report results to inform program schedules and deliverables.
Influence cross-functional stakeholders to continuously improve processes and inspire alignment.

Who We’re Looking For

Bachelor’s degree with 5+ years of experience; or a Master’s degree with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.
3+ years of continuous improvement or technical program management.
Experience guiding cross-functional teams and demonstrating influence skills to deliver results.
Excellent communication and presentation skills with the ability to present to audiences at all levels in the company.

Preferred Qualifications

Knowledge of change management methodologies.
CAD experience, particularly with CREO and Teamcenter, is a bonus.
SAP experience or familiarity with another ERP system is preferred.
Familiarity with project management software and tools, including MS Project, QuickBase, Office Timeline, or equivalent, is essential.
Knowledge of program management methods and experience in product development and release (PDR) procedures is necessary.
Relevant project management certifications such as PMP, CAPM, Scrum Master, or PRINCE2 are required.
Experience in or knowledge of semiconductor fabrication, semiconductor equipment operations, or related industries is a plus.
Lean Six Sigma methodology or certification (Green Belt, Black Belt) is also a plus.

Our Commitment

#LI-MN1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Electrical Engineer 4 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

Join Lam as an Electrical Engineer and you'll be at the forefront, designing and developing electronic solutions for advanced applications. Your role involves designing and analyzing equipment, conducting experimental tests, evaluating results to create reliable cutting-edge solutions.

In this role, you will directly contribute to CSBG Engineering.

What You’ll Do

Design and develop highly complex electrical systems, sub-systems, and/or solutions, applying engineering methods to design.
Contributes to research and development efforts for future products by collecting and analyzing data to improve electrical system designs.
Develops functional specifications for highly complex electrical/ electro-mechanical systems and power distribution components.
Collaborate with cross-functional engineering design teams to design and modify custom and OEM system components.
Perform hands-on test and validation utilizing lab equipment to characterization of the performance of the electrical/ electro-mechanical systems.
Prepare high-quality reports and technical presentations to clearly communicate design intent, analysis, and results to diverse audiences in design reviews.
Acts as a resource and mentor for more junior colleagues.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electrical Engineering or related field with 8+ years of experience; or Master’s degree with 6+ years’ experience; or equivalent experience.
Hands-on experience in electronic circuit design (analog, digital), signal and controls theory, development and associated electrical board design, troubleshooting and validation.
Understanding of AC/DC Power distribution systems.
In depth system level understanding of Electrical architecture, system integration, and applications.
Excellent working knowledge in Printed Circuit Board (PCB) and low voltage circuit design for power and control applications.
Expertise in application of power and controls technologies for systems automation.
Knowledgeable in CAD tools for circuit design and simulation (e.g., PCAD, ORCAD, ZUKEN, AutoCAD, Spice, ADS, HFSS).

Preferred Qualifications

Ability to define functional requirements and execute in a dynamic team environment.
Familiar with design for serviceability, manufacturability, reliability.
Highly proficient at troubleshooting systems with tools like network sniffers, protocol analyzers, and tool logs.
Experience in troubleshooting with problem-solving techniques such as 5-why, 8D, fishbones, etc.
Excellent oral and written communication skills including technical presentations.
Experience in semiconductor industry or related (industrial, automotive, military).

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer 4 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

In the Dielectric Film Business Unit (DFBU) as part of the Global Products Group, we are dedicated to excellence in the design and engineering of Lam's Deposition products. We drive innovation to ensure our cutting-edge solutions are helping to solve the biggest challenges in the semiconductor industry.

The Impact You’ll Make

In this role, you will have the unique opportunity to directly influence the next generation of Memory and Logic wafer fabrication equipment (WFE). By developing and releasing innovative hardware and cutting-edge technologies, your contributions will shape the future of Lam’s Strata and Carbon product lines. These deposition products are widely recognized as world market leaders, specifically designed for use in 3D NAND and Logic devices. These devices are integral to numerous applications, ranging from high-performance computing to consumer electronics. By pushing the boundaries of what is possible in wafer fabrication, your work will enable higher performance, greater efficiency, and increased scalability.

What You’ll Do

Solve problems conclusively using fundamental principles, best practices and intuition.
Create elegant and practical designs using advanced materials and processes.
Perform detailed and timely analyses using first principles and computational models.
Develop and conduct feasibility studies and test plans to characterize design performance.
Prepare effective reports and technical presentations for diverse audiences of peers, leaders and customers.
Collaborate with suppliers and internal teams to create solutions that can be produced reliably and efficiently around the world.
Provide key deliverables including design review presentations, Failure Modes and Effects Analyses (FMEA), technical specifications, risk analyses and test specifications.
Generate engineering documentation that meets Lam standards and industry best practices.
Mentor and provide technical guidance for other engineers.
Lead cross functional teams.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Mechanical Engineering or related field with 8+ years of experience; or Master’s degree with 6+ years’ experience; or a Ph.D. with 4+ years’ experience; or equivalent work experience.
Excellent communication, both written and verbal, and technical presentation skills.
Highly proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills.
Understanding of statistics and its application to engineering
Ability to multi-task and manage time

Preferred Qualifications

Excellent communication, both written and verbal, and technical presentation skills.
Experience in Semiconductor industry is a plus.
Experience in leading projects, or problem solving while managing time and multiple priorities.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Laboratory Service Engineer 2 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will contribute to concept and feasibility hardware to enhance current and develop next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required Personal Protective Equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who We’re Looking For

Bachelor’s degree in a technical field with 2+ years of experience; or Associates degree in a technical field or equivalent military training with 4+ years of relevant experience; or equivalent work experience.
This is a graduate eligible role.

Preferred Qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our Commitment

#LI-SH2

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Facilities Lab Operations Engineer (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

The Facilities Lab Services Operations Engineer at Lam Research is responsible for supporting the operations of vacuum pumps and abatement systems that remove hazardous gases and chemicals from semiconductor lab equipment. As a Facilities Engineer at Lam, with your project management expertise, you’ll plan and oversee facility changes for plant, tool installations, and production equipment layouts. You'll work with architects to develop design criteria, layouts, and prepare contracts. You inspect construction and installation progress to ensure adherence with established specifications and schedules. Your focus on performance specifications required to meet unique operating conditions contributes to the efficiency and compliance of Lam's state of the art facilities.

What You’ll Do

Provide engineering support for facilities infrastructure related to R&D tools, including vacuum pumps and abatement units.
Work with engineering team members to ensure operations reliability and troubleshoot maintenance issues for systems such as process module vacuum pumps and point of use abatement units.
Manage equipment operations reliability improvements, including parts ordering and spare inventory recommendations.
Support commissioning sign-off for accepting operations equipment.
Plans facilities changes for plant, labs, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations.
Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.
Development and review procedures and business processes documentation related to operations.
Conduct incident troubleshoot and support root cause analysis for responsible systems.

Who We’re Looking For

Bachelor of Science degree in Mechanical engineering or Chemical engineering; (Professional engineering license a plus).
Three (3) years of experience in a similar role in the semiconductor industry.
Demonstrated experience with advanced troubleshooting skills which support core responsibilities.
Strong organizational and communication skills, and ability to interact with internal customers efficiently.
Ability to work off hours and/or weekends if needed to support project deliverables on time while ensuring highest quality standards.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

Global Product Group, Deposition Products Group, Dielectric Films Business Unit

The Impact You’ll Make

In this role, you will directly contribute to the next generation of memory fabrication hardware and technologies used on Lam's Vector STRATA line of deposition reactors - the world's most advanced deposition tools that are at the core of every 3D NAND device.

What You’ll Do

Solve problems conclusively using fundamental principles, best practices and intuition.
Create elegant and practical designs using advanced materials and processes.
Perform detailed and timely analyses using first principles and computational models.
Develop and conduct feasibility studies and test plans to characterize design performance.
Prepare effective reports and technical presentations for diverse audiences of peers, leaders and customers.
Collaborate with suppliers and internal teams to create solutions that can be produced reliably and efficiently around the world.
Provide key deliverables including design review presentations, Failure Modes and Effects Analyses (FMEA), technical specifications, risk analyses and test specifications.
Generate engineering documentation that meets Lam standards and industry best practices.

Who We’re Looking For

Minimum Qualifications:

•   Bachelor’s degree in Mechanical Engineering or related field with 5+ years of experience; or Master’s degree with 3+ years; or equivalent experience.
•   Excellent communication, both written and verbal, and technical presentation skills.
•   Highly proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
•   Hands-on experimental and design background with engineering skills

Preferred Qualifications

•   Excellent communication, both written and verbal, and technical presentation skills.
•   Experience in Semiconductor industry is a plus.
•   Experience in project management, managing projects, or problem solving while managing time and multiple priorities.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Technical Program Manager 6 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Technical Program Manager at Lam, you are not just overseeing projects – you’re orchestrating breakthroughs in support of [insert strategic initiative]. You’ll lead cross-functional teams through successful project execution blending your technical excellence with strategic planning to deliver new or upgraded products. Your role is vital, owning technical projects from initiation through delivery using your expertise in planning, directing, and monitoring schedules and budget.

In this role, you will directly contribute to ___.

What You’ll Do

Over-see the optimization or creation of technical product offerings, processes, or programs, developing project plans, aligning teams, managing risk, and driving projects through release.
Take ownership and accountability for the success of projects and cross-functional teams to ensure program schedules, performance metrics, and delivery meets business requirements on time and within budget.
Partner with stakeholders to understand process and system requirements, and deliver enhancements based on a changing technology landscape.
Lead Continuous Improvement projects, owning the entire lifecycle from inception to impactful results.
Perform data collection and statistical analysis, and report results to inform program schedules and deliverables.
Coach and train teams in process methodologies, tools, and best practices.
Influence cross-functional stakeholders to continuously improve the process and inspire alignment.
Deliver change management for programs that are sustainable and maintains long-term success.
Successfully navigate multiple projects in a dynamic environment.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree with 15+ years of experience; or Master’s degree with 12+ years’ experience; or a PhD with 8+ years’ experience; or equivalent experience
12+ years of continuous improvement or technical program management.
Experience leading cross-functional teams and demonstrating excellent leadership and influence skills to deliver results.
Excellent communication and executive presentation skills with the ability to present to audiences at all levels in the Company.

Preferred Qualifications

Experience in or deep knowledge of Semiconductor fabrication, Semiconductor Equipment Operations, or related industries is a plus.
Expert knowledge of Program Management methods and experience in Product Development & Release (PDR) procedures.
Relevant project management certifications such as PMP, CAPM, Scrum Master, or PRINCE2.
Experience in Lean Six Sigma methodology or certification (Green Belt, Black Belt) is a plus.
Experience with Agile and/or Waterfall project methodologies.
Expertise with project management software and tools including MS Project, QuickBase, Office Timeline, or equivalent.
Experience in Change Management methodologies is a plus.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to the Deposition Products Group.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

IND123 #LI-CW1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mgr. Product Management (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

Customer Service Business Group (CSBG) Spares.

The Impact You’ll Make

As a Customer Service Business Group (CSBG) Spares Product Manager, you will be responsible for one or more Spares commodities including deposition part families contributing to the business unit objectives of increasing market share and profitability. 

What You’ll Do

Lead development & release of new Spare products to address emerging aftermarket business opportunities.

Management of released products in the Spares portfolio

Partner with Product Groups in support of systems product development and release process where Spares and Systems businesses intersect.

Partner closely with supply chain, engineering, operations, marketing, & business development teams.

Who We’re Looking For

Master’s degree in Material Science, Physics, Chemistry, Chemical Engineering, or related field with 8+ years of experience; or a PhD with 5+ years’ experience; or equivalent experience
Must have experience with semiconductor wafer fab equipment
Ability to hold support groups accountable to executing to business requirements
Creative thinking, problem solving, and troubleshooting skills
Exceptional clear communication and presentation skills
Comfortable traveling 10% of the time

Preferred Qualifications

Familiarity with one or more families of semiconductor equipment
Exceptional analytical and experimental design skills

Experience with complex problem-solving including clarification of symptoms and ability to highlight the fundamental root cause and necessary corrective actions

Experience driving a solution set across development teams (primarily Technical/Engineering, Marketing, Business Development) through market requirements, vision, and positioning
Strong bias toward action

Our Commitment

#LI-LE1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

RF Engineer 4 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a RF Engineer at Lam, you play a crucial role in designing, building, and troubleshooting cutting-edge radio frequency (RF) solutions for power delivery and plasma generation in our Etch and Deposition products. You specialize in utilizing RF as a power source and creating innovative generator designs. Your work paves the way for new power sources to be used Lam's wafer fabrication equipment.

What You’ll Do

The RF EE designs, develops, modifies, and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. Determines design approaches and parameters. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development.

You will be responsible for performing professional electrical engineering research, design, development, modification, and evaluation in support of electrical and electro-mechanical systems/subsystems.
You will work with a multidisciplinary engineering design team: electrical, mechanical, software, process, technical support, and suppliers, on the design, modification, of custom and OEM embedded systems components.
You will need to prepare and analyze test plans and procedures to assure that technical and operational requirements are met and properly demonstrated.
You will be responsible for the collection and analysis of pertinent material and data in preparation of your presentation at design, project, and program reviews.

Who We’re Looking For

Minimum Qualifications

Typically requires a minimum of 6 years of related experience with a Bachelor’s degree, or 4 years and a Master’s degree; or a PhD with 2+ year experience; or equivalent experience.
Primarily responsible for design/selection, testing and documentation of RF delivery systems (100kHz to 100MHz; Watt to Kilowatt ranges).
Must have experience with complex RF measurement equipment (Power Meters, Network-, Impedance- and Spectrum Analyzers, etc.).
Familiarity with high voltage (>1kV) design rules/practices DC – 100MHz is also desired.
SPICE, LabView, MathCAD or MatLab, and analysis tools (i.e. – HFSS, Comsol, Microwave Studio) experience preferred.
Experience in or fundamental knowledge of plasma processing, plasma sources and plasma loads is a plus.
Excellent communication and presentation skills
Outstanding analysis and trouble-shooting skills
Ability to drive functional requirements and execute in a dynamic-teams environment

Preferred Qualifications

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Product Support Engineer [Software] (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

You will be a part of Software Global Product Support team under Global Product Engineering organization.

The Impact You’ll Make

As a Software Engineer at Lam, you will be at the forefront of innovation by designing, developing, and troubleshooting, and debugging software programs. Your role is pivotal in troubleshooting software issues on tools that support design, infrastructure, and technology platforms. Your expertise will determine hardware compatibility and influence design, ensuring seamless integration between software and hardware.

In this role, you’ll make an impact across Lam’s entire product portfolio of equipment working within our centralized software engineering team, collaborating with some of the brightest minds in the industry.

What You’ll Do

Provide software support for Lam’s Etch/Deposition tools and associated software applications for field deployment to multiple customers.
Act as interface between regional support and SW Engineering for customer escalation management that include Spec Reviews, Software solution deliverables and upgrades
Support activities that include software installation, troubleshooting/debugging software issues, creating technical documentation, and conducting training sessions for customers/support engineers.
Extend support activities by physically participating in Fremont labs to evaluate the Concept and Feasibility or Alpha form fit and function of software/hardware on Lam’s equipment and pilot equipment manufacturing.
Troubleshooting includes understanding the problem statement, analyzing logs, reviewing/understanding software code to identify the root cause of the issue, and working with cross-functional teams to ensure the successful closure of requests.
Interact with cross-functional teams to have ready access to software, process, electrical, mechanical, and product safety engineers for effective escalation management.
Technical documentation activities include capturing data for software installation, enabling configuration, maintenance activities, and creating technical training content.
Project management activities include driving software quality improvement projects by collaborating with cross-functional teams across regions. This requires effective planning, periodic follow-up, maintaining status reports, providing technical input, creating/delivering presentations, and stakeholder management.
Participate in multiple technical reviews such as Concept and Feasibility, Alpha & Beta Readiness meetings, Customer Escalation review, and Critical Design Review meetings.
Adhere to Lam’s culture and core values.
Other activities include software qualification assurance and continuous integrated software testing and development practices and methods, using standard software development program management processes
Travel up to 20% of the time may be expected for support activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Computer Science or equivalent with a minimum of 6 years of industry experience or
Bachelor’s degree in Computer Science or equivalent with a minimum of 8 years of industry experience.
Excellent presentation and communication skills (oral and written).

Preferred Qualifications

Prior semiconductor equipment experience.
Experience in distributed embedded controls system desired.
Experience in supporting Lam Tools at a customer Fab (hardware/software).
Previous roles demonstrating R&D, new product development, and customer-facing assignments showing a good understanding of both factory and customer needs/issues.

Our Commitment

#LI-SG1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Systems Engineer 4 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Systems Engineer at Lam, you'll design complex frameworks, systems, or products for our wafer fabrication equipment. You will define system specifications, requirements, parameters, and compatibility to integrate hardware, software, and firmware into a cohesive system. Identifying, analyzing, and resolving system design weaknesses combined with your multi-layered technical expertise you help shape the next generation of Lam initiatives.

What You’ll Do

Who We’re Looking For

Minimum of 8 years of related experience with a Bachelor’s degree; or 6 years and a Master’s degree; or a PhD with 3 years experience; or equivalent experience.

Preferred Qualifications

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer/KAT 5 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Key Account Technologist at Lam, you will drive the adoption of Lam’s cutting-edge technologies by influencing both customers and internal stakeholders. You will work closely with internal teams to develop best-in-class technical solutions by defining requirements, demonstrating solutions through demos, and managing customer communications. Your role involves:

Developing new and advanced process formulations.
Defining equipment hardware to meet processing and customer requirements.
Professionally represent the company to the customer. Utilize knowledge of the company’s product lines and services to keep existing/potential customers informed when new/additional needs are identified.
Work directly with customers and local account teams to (a) identify high-value problems, (b) work with internal teams to develop differentiated technical solutions, and (c) own and execute high-quality demos.
Actively address any potential issues at the customer site and provide alternative solutions. Drive the implementation of new solutions for the customer.

What You’ll Do

In this role, you will be accountable for customer adoption of a brand new technology in the industry.

Drives the adoption of new Lam technologies and works closely with customers to introduce new technologies and demonstrate through demos, on-site evaluations, and new tool qualifications.
Responsible for performing process engineering research, development, and evaluation with a deeper understanding of how process and hardware affect customer device performance and cost metrics.
Works with customer and internal subject matter experts to understand roadmaps, process flow, inflection points, requirements, and business issues/challenges.
Supports technology managers in planning, data collection, analysis, and reporting of customer demos to enable new applications and defend existing process applications.
Works with suppliers to make sure required parts and supplies are available.
May act as a single point of contact accountable for customer and account team requests.
Travel to overseas customer sites expected (~20%).

Who We’re Looking For

Bachelor’s degree in Materials Science, Chemical Engineering, Chemistry, Physics, or related field with 12+ years' experience; or a Master's degree with 8+ years' experience; or a PhD with 5+ years' experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.).
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).

Our Commitment

#LI-MN1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Regional Product Support Engineer (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

What You’ll Do

Provides remote response and on-site advanced level support to analyze, troubleshoot and manage tool down escalations and provide performance improvements solutions of all Lam semiconductor processing equipment in a clean room environment at customer sites.

Communicates as a subject matter expert on high level technical issues and escalations while providing guidance and recommending solutions
Provides strategic technical leadership and direction by leveraging technical knowledge of Lam's products and an understanding of the customer’s long-term manufacturing needs and equipment support strategy
Participates in Lam’s worldwide technical community and actively shares knowledge and takes a leadership position to enhance worldwide learning and its application
Identifies and communicates opportunities for installed base performance improvements within a customer site/account through hands on and or installed based performance data collection/analysis
Develops customer confidence through credible recommendations and an understanding of the customer’s perspective to support sales, service and revenue
Drives required actions at the customer site to resolve escalations and prevent repeat / preventable problems
Liaises between Customers, Product Groups, Field Sales, Business Development and other organizations to ensure closure of product issues. Works closely with Account GM(s), CSOMs and other senior level leaders in NA Field, CSBG and GPG

The Impact You’ll Make

Provides technical support to field engineers, technicians, and product support personnel who are diagnosing, troubleshooting, repairing and debugging complex electro/mechanical equipment, computer systems, complex software, or networked and/or wireless systems. Responds to situations where first-line product support has failed to isolate or fix problems in malfunctioning equipment or software. Reports design, reliability and maintenance problems or bugs to design engineering/software engineering. May be involved in customer installation and training. Provides support to customer/users where the product is highly technical or sophisticated in nature.

Who We’re Looking For

Bachelor of Science degree with 8+ years of work experience.
Understand and work from electrical and mechanical schematics, diagrams and interpret operation manuals.
Use computer applications, including data analysis tools, word processing, spreadsheet, and presentation software.
Formulate root cause hypothesis, analysis and action plans with detail problem statements, data analysis and success criteria.
Provide quality remote and on-site escalation support and escalation management.
Troubleshoot technical problems and coordinate multiple technical tasks.
Work directly with customers to meet their needs and expectations with attention to detail and high degree of accuracy.
Establish and maintain cooperative working relationships with co-workers and customer and adhere to customer rules and policies regarding worksite behavior and safety with minimal supervision.
Able to work in constrictive clean room environment, wearing appropriate personal protective safety equipment as required, and sit or stand for prolonged periods of time in a demanding environment with changing workloads.
Work flexible shifts and on-call including nights, weekends, and holidays.
Be available for constant communication with the field through either meeting, instant messenger, text, email, etc.
Able to travel both domestic and international based on business need.

Preferred Qualifications

Familiar with the SW structure and the ability to troubleshoot from the Control Works level.
Acquainted with Analog-to-Digital I/O devices IOC, SIOC, EIOC, and how they interact with the Tool Platform SW Package.
Knowledge of the directory structure, and the ability to troubleshoot the structure.
Communicate with customer at a technical level and influence customer decision to follow action plans.

Our Commitment

#LI-LE1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Facilities Engineer - Mechanical Engineer (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

Responsible for overall site facility mechanical infrastructure and owns final results associated with decisions that affect it. Plans facilities change for plant, labs, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

What You’ll Do

Responsible for overall site facility mechanical infrastructure and owns final results associated with decisions that affect it
Core areas of responsibility include (but not limited to):
- HVAC (cleanroom, office, process/scrubbed exhaust, boilers, and chillers)
- Process water distribution and integrity of supply quality
- Clean dry air infrastructure
- Natural gas infrastructure
- Process/Tool vacuum
Manage clean room particle quality documentation and coordinate resources to ensure cleanrooms stays within specifications
Responsible for tracking, monitoring, and reporting on capacity of all core responsible areas beginning from main distribution down to point of connection (POC)
Manage and approve all core responsibility utility POC modifications and ensure contractor installations reflect internal documentation
Identify infrastructure improvements which drive operating costs down, and/or support a more robust mechanical integrity enhancing business uptime
Manage and report on expense and capital budgets associated with mechanical contractors

Who We’re Looking For

BS in Mechanical engineering, with a minimum of 8 years of industrial design experience (Professional engineering license a plus)
Must possess advanced troubleshooting skills which support core responsibilities
Strong organizational and communication skills, and ability to interact with internal customers efficiently
Ability to work off hours and/or weekends if needed to support project deliverables on time while ensuring highest quality standards

Our Commitment

#LI-YS1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Facilities Engineer - Electrical Engineer (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

The Electrical Engineer will develop discipline specific engineering designs and develops drawings, specifications, and scope of work documents for the construction of new R&D Lab facilities, new process equipment installations, and existing facility system alterations. In this role, you will review and develop estimate design costs including equipment, installation, labor, materials, preparation, and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes. Leads the discipline specific systems operations and maintenance activities to ensure safe and efficient operation. Plan facility(s) changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations.

What You’ll Do

Technical lead for design, construction, commissioning, system acceptance testing, and operations of critical facilities electrical systems including but not limited to utility power, emergency power, UPS power, generators/ATS, lighting, grounding etc.
Responsible for assuring proper maintenance is performed (active participation in coordination efforts) and records are properly evaluated and followed up to assure highest reliability possible.
Using EasyPower software, generate and evaluate power coordination studies, arc fault analysis and short circuit calculations.
Responsible for tracking, monitoring, reporting on capacity from the service level to branch circuit panels ensuring adequate capacity is available to support business growth based upon forecasts and prior usage rates.
Manage and approve all electrical circuit modifications and ensure contractor installations reflect internal documentation.
Participate in both facilities’ capital and tool installation design reviews ensuring outsourced design firms design to established Lam protocols and expectations.
Identify infrastructure improvements which drive operating costs down, and/or support a more robust electrical integrity enhancing business uptime.
Manage and report on expense and capital budgets in support electrical engineering expense and management.
Develop, maintain, and update technical and construction specifications for electrical equipment and materials of construction.
Active participation in review and approval of Site Incident Prevention Program (SIPP) requests which enable active construction/maintenance activities on site, while preventing negative business impacts.
Flexibility to travel periodically both foreign and domestic.

Who We’re Looking For

Qualifications

Bachelor’s degree in the field of Electrical Engineering with a focus in Power Analysis, Power Systems and Power Distribution, OR, Master’s degree with 2+ years of experience in the field of Electrical Engineering with a focus in Power Analysis, Power Systems and Power Distribution.
Eight (8) years of experience in a similar role.
Professional Engineering License or EIT certification desired.
Strong working knowledge of Easy Power modeling software and experience sustaining an active model for ~1-20MVA site.
Strong knowledge of NFPA/NEC & NETA requirements and experience leveraging documents in design and maintenance settings.
Well experience in advanced electrical troubleshooting skills and strong knowledge with design and maintenance of variable speed drive systems.
Strong organizational and communication skills, and ability to interact with customers eﬃciently.
Strong “solution provider mindset” with ability to drive solutions for our customers when challenges arise.

Preferred Qualifications

Professional Engineering License or EIT certification desired.
Strong working knowledge of Easy Power modeling software and experience sustaining an active model for ~1-20MVA site.
Strong knowledge of NFPA/NEC & NETA requirements and experience leveraging documents in design and maintenance settings.
Well experience in advanced electrical troubleshooting skills and strong knowledge with design and maintenance of variable speed drive systems.
Strong organizational and communication skills, and ability to interact with customers eﬃciently.
Strong “solution provider mindset” with ability to drive solutions for our customers when challenges arise.

Our Commitment

#LI-YS1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Electrical Engineer 4 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

Join Lam as an Electrical Engineer and you'll be at the forefront, designing and developing electronic solutions for advanced applications. Your role involves designing and analyzing equipment, conducting experimental tests, and evaluating results to create reliable cutting-edge solutions.

In this role, you will directly contribute to the design and development of next generation Lam Wet Deposition products. You will be part of the future direction of the semiconductor industry.

What You’ll Do

Operate as project owner leading multidisciplinary projects with a high-level of autonomy, managing schedules, milestones, and deliverables.
Review complex problem statements, generate solutions, identify and lead the effort of selecting the best solution.
Perform comprehensive optical, image sensor, and image quality characterization
Collaborate with cross-functional engineering teams to identify, drive, and validate camera and sensor data capture and processing improvements in the hardware and software
Plan and execute cutting edge research to advance image and video analytics on semiconductor equipment.
Develop function design specifications, test plans, documentation and reports as required.
Mine and analyze video data sets to improve Lam Research products.
Assess the effectiveness and accuracy of your models and data gathering techniques.
Perform hands-on test and validation utilizing lab equipment for characterization of the performance of the electrical/ electro-mechanical systems.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in electrical engineering or related field with 8+ years of experience; or Master’s degree with 6+ years’ experience; or equivalent experience.
Excellent communication skills, both written and verbal, to effectively collaborate with cross-functional teams.
Strong experience with image processing, computer vision and computational imaging algorithms and associated libraries
Expertise with lens-based imaging systems/ camera calibration methods/ scripting languages such as Matlab or Python/ projective geometry and geometric imaging optics
Familiar with software test methodologies, Design of Experiments, and a passion for testing
Creative thinking, strong problem solving and troubleshooting capabilities
Ability to complete projects and learn the required skills with minimal guidance
Strong problem-solving skills and the ability to analyze complex systems. Proficient at troubleshooting with tools: DVM, Oscilloscope, network sniffers, protocol analyzers, etc.

Preferred Qualifications

Strong project management skills and the ability to work independently and as part of a team.
Experience with Python computer programming and the scientific Python Stack.
Experience with Machine Learning or Vision Systems is a PLUS.
Knowledge of computer vision algorithms and techniques, including object detection, image segmentation, and feature extraction.
Strong understanding of image processing techniques and algorithms.
Hands-on experience in developing and deploying machine vision systems in an industrial or research setting.
Experience in troubleshooting with problem-solving techniques such as 5-why, 8D, fishbones, etc.
Ideal candidate will have a background understanding in semiconductor processing

Our Commitment

#LI-MN1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Facilities Engineer - Gas / Chemical (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Facilities Gas / Chemical Engineer at Lam, you’ll plan and oversee facility changes for plant, tool installations, and production equipment layouts. You'll work with architects to develop design criteria, layouts, and prepare contracts.

In addition, you will provide technical leadership, innovation, and guidance in the planning, design, configuration, construction, commissioning, operations, and maintenance of gas and chemical delivery equipment & systems, Pump & Abatement units. Provide technical direction to R&D design engineers throughout the project conceptual design phase, interface with site user groups, other engineering disciplines, local municipalities and/or utilities, trade contractors, and other project stakeholders as required.

What You’ll Do

Responsible for site facility specialty and bulk gas and chemical infrastructure design and operations and owns results associated with their decisions.
Develops, maintains, and updates Lam’s technical specifications for facilities process equipment and systems.
Knowledgeable expert to provide engineering solutions to Project Management team and Operations team for new process tool gas and chemicals, from safe delivery to effective post process gas and chemical abatement.
Leads technical review of projects concerning process systems, including tool installation and infrastructure projects to ensure proper design and adherence to Lam requirements.
Support Chemical Request Form/Chemical Information Management System review and approval process.
Ensure contractor installations reflect internal documentation for systems within their area of responsibility.
Identifies facilities infrastructure and process equipment improvements.
Responsible for quarterly tracking, monitoring, and reporting of systems capacity and operating capabilities and uptime for facilities systems managed.
Travel to Fremont CA campus and other Lam Research sites may be required.

Who We’re Looking For

Bachelor's degree in Chemical engineering or Mechanical engineering.
Eight (8) years industrial design work experience in the semiconductor industry (Wafer fab), including Specialty gas systems, point of use gas abatement systems, Bulk gas and chemical systems design.
Working knowledge of specialty and bulk gas distribution system.
Must possess advanced troubleshooting skills which support core responsibilities.
Strong organizational and communication skills, and ability to effectively work with internal technical staff.
Knowledge of Piping and Instrumentation Diagrams and Sequence of Operations for process systems.
Strong analytical skills and knowledge of SPC, 8D, DMAIC, FMEA and other design tools.
Experience leading operating engineers and/or technicians in a facility or manufacturing setting.
Experience writing Standard Operating Procedures for process systems.
Strong Excel spreadsheet skills.
Ability to work off hours and/or weekends if needed to support project deliverables on time while ensuring highest quality standards.

Our Commitment

#LI-YS1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
Provide technical guidance and mentoring to more junior engineers.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Mechanical Engineering or related field with 5+ years of experience; or Master’s degree with 3+ years; or equivalent experience.
Excellent communication, both written and verbal, and technical presentation skills.
Highly proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills.

Preferred Qualifications

Experience in Semiconductor industry is a plus.
Experience in project management, managing projects, or problem solving while managing time and multiple priorities.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Engineering Technician 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

At Lam, as an Engineering Technician, you play a crucial role in supporting activities including design, test, modification, and assembly of electro-mechanical systems, experimental design circuitry, and specialized test equipment. Referencing schematics, diagrams, and descriptions, you conduct testing and troubleshooting. You'll perform fault isolation and assist in determining methods to remedy malfunctions. Your commitment to precision and problem-solving enhances Lam's engineering systems.

What You’ll Do

Perform testing, check-out, and troubleshooting using schematics, diagrams, descriptions, layouts, or defined plans.
Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems.
Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
Conduct operational test and fault isolation on systems and equipment, help in determining methods or actions to remedy malfunctions.
Support the design, construction, test, and check-out of test equipment.
Use test and diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus.
Collaborates with development engineers conducting engineering tests to collect design data or support in research efforts.

Who We’re Looking For

2-4 years of related work experience.
Firsthand experience with installation, maintenance, repair, testing, or troubleshooting of equipment or electronics.
Effective communication skills, written and verbal, in English.
Proficient in utilizing computer-based data systems, applications, and Microsoft Office software.
Ability to work a shift schedule.

Preferred Qualifications

Associates degree, Technical Certificate, Diploma or higher in a technical field.
Experience in electrical engineering, mechanical engineering, bioengineering, metrology, lab operations, or related areas.
Experience in semiconductor experience is a plus.

Our Commitment

#LI-SH2

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Technical Program Manager 4 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Over-see the optimization or creation of technical product offerings, processes, or programs, developing project plans, aligning teams, managing risk, and driving projects through release.
Take ownership and accountability for the success of projects and cross-functional teams to ensure program schedules, performance metrics, and delivery meets business requirements on time and within budget.
Partner with stakeholders to understand process and system requirements, and deliver enhancements based on a changing technology landscape.
Run Continuous Improvement projects, from inception to impactful results.
Perform data collection and statistical analysis, and report results to inform program schedules and deliverables.
Influence cross-functional stakeholders to continuously improve the process and inspire alignment.
Deliver change management for programs that are sustainable and maintains long-term success.
Successfully navigate multiple projects in a dynamic environment.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree with 8+ years of experience; or Master’s degree with 6+ years’ experience; or a PhD with 3+ years’ experience; or equivalent experience.
6+ years of continuous improvement or technical program management.
Experience guiding cross-functional teams and demonstrating leadership and influence skills to deliver results.
Excellent communication and executive presentation skills with the ability to present to audiences at all levels in the Company.

Preferred Qualifications

Experience in or knowledge of Semiconductor fabrication, Semiconductor Equipment Operations, or related industries is a plus.
Knowledge of Program Management methods and experience in Product Development & Release (PDR) procedures.
Relevant project management certifications such as PMP, CAPM, Scrum Master, or PRINCE2.
Experience in Lean Six Sigma methodology or certification (Green Belt, Black Belt) is a plus.
Experience with Agile and/or Waterfall project methodologies.
Expertise with project management software and tools including MS Project, QuickBase, Office Timeline, or equivalent.
Experience in Change Management methodologies is a plus.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Engineering Technician 4 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to metrology team in TUA campus.

What You’ll Do

Sets up metrology equipment and performs recipe adjustments within guidelines.
Operate semiconductor metrology tools including but not limited to optical profilometers as well as other semi-conductor laboratory instruments such as wafer sorters and baggers
Manage wafer movements and metrology requests from an online job queue
Delivering metrology results with a focus on maintaining data integrity
Document and provide basic operational training to users of metrology tools
Run SPC test and track tool performance of metrology assets
Performs operational test and fault isolation on systems and equipment
Support Engineers in running detailed experiments and providing written pass-down
Interface with vendor Field Service Engineer to provide support and troubleshooting ensuring timely solutions and minimal downtime

Who We’re Looking For

Must meet one of the following qualifications:
- Bachelor’s degree in a science field
- Associates Degree with 3+ years relevant experience
- 5+ years relevant work experience in semiconductor industry

Ability to work in a clean room environment (bunny suit, safety glasses, masks, gloves)
Ability to be flexible and responsive to changing priorities
Proficient with MS Office (Outlook, PowerPoint, Excel, Teams)
Excellent oral and written communication

Preferred Qualifications

Prior operation experience of optical interferometer (Camtek eagle system) or other similar systems.
Strong team player and creative problem solver
Driven, highly organized, strong attention to detail
Capability to deal with fast paced, customer service-oriented mindset
Flexibility to provide weekends coverage or compressed work schedule

Our Commitment

#LI-SH2

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Program/Project Manager 6 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Tualitan Lab Expansion New Facilities Project Manager is part of Lam Research's Global Workplace Solutions (GWS). The GWS team is committed to providing safe, sustainable, innovative high value solutions which support Lam business requirements. This includes new construction, real estate, space planning, and utility planning.

The Impact You’ll Make

As the Tualatin Site New Lab Expansion Project Manager at Lam, you will play a pivotal role in driving a new major facilities construction project including a new semicondcutor cleanroom lab and central utilities building. A facilities construction project manager is responsible for overseeing and coordinating all aspects of the lab construction project from inception to completion. The PM ensures projects are completed on time, within budget, and to the required quality standards. CPM's also manage budgets, allocate resources, and communicate effectively with stakeholders. You’ll be at the forefront of project initiation through delivery, using your expertise to coordinate cross-functional teams, manage design, and ensure the project is completed on time and within budget. A major Facilities Construction Project Manager oversees large scale construction projects within the Global Workplace Services organization. You will be responsible for planning, budgeting, scheduling, and managing all aspects of these projects, from initial concept to final completion. This role involves leading project teams, coordinating with various stakeholders, and ensuring projects are completed on time and within budget.

What You’ll Do

In this role, you will directly contribute to:

Project Planning and Management: Developing project scopes, timelines, and budgets, including feasibility studies and use of site land.
Team Leadership: Leading the construction program. Leading and coordinating project teams, including architects, engineers, contractors, and other service providers.
Cost Control: Managing project budgets, tracking expenses, and ensuring cost-effective resource allocation.
Scheduling and Monitoring: Developing and managing project schedules, monitoring progress, and addressing variances.
Stakeholder Communication: Communicating project updates, progress, and issues to stakeholders, including senior management and clients. Communication is upwards to executive levels as well as to the Project Team stakeholders and internal customers. Develop and deliver clear and concise communications for leadership teams and stakeholders.
Quality Control: Implementing quality control procedures and inspections to ensure construction meets standards and complies with codes.
Contract Management: Managing contracts with contractors, subcontractors, and other service providers.
Problem Solving: Identifying and resolving project challenges, ensuring projects stay on track. Identifying and removing obstacles. Leading teams to solve complex problems.
Reporting: Preparing and presenting project progress reports, financial reports, and other documentation.
Procurement: Facilitating procurement processes and vendor acquisition. This includes long lead equipment and materials procurement.
Business Process: Build solutions that will improve standard business processes and support critical business strategies. Partner with cross-functional stakeholders to continuously improve the process.
Provide actionable insights for management to influence decision making through data collection and analysis.
Risk Management: Ensure execution, manage risks, assure adherence to program or project schedules, and performance to meet business requirements.
Change Management Run change management for projects and programs and support proper project closure.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Engineering, and a Master’s degree in engineering, operations, law, business or supply chain.
15+ years of related experience in semiconductor cleanroom facilities construction project management or program management
Experience leading cross-functional teams and influencing stakeholders.
Advanced analytical skills to interpret and utilize data for decision support.

Preferred Qualifications

Semiconductor industry or global supplier experience.
Excellent verbal and written communication skills. Ability to demonstrate executive communication.
Relevant project management certifications such as PMP, CAPM, Scrum Master, LEED.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

TW Engineer - FS II (CST) (Hsinchu, TW-Hsinchu, TW, 30076)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Field Service Engineer 3 (Meylan, FR, 38240)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Troubleshoot and create customer response action plans to support customer needs.
Transparently discuss opportunities and challenges with customer to increase trust.
Provide technical instruction and mentoring for more junior engineers.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field and 5+ years of experience; or Master’s degree with 3+ years; or equivalent work experience.
Previous experience in installation, maintenance, repair, or troubleshooting of semiconductor capital equipment.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Mgr, Sales (Meylan, Meylan, 38240)

The Group You’ll Be A Part Of

The Global Customer Operations Group brings industry insights and experience to help our customers deliver on their technology roadmaps. We work tirelessly to earn the trust of our customers, because we know that working closely together leads to the highest quality outcomes.

The Impact You’ll Make

Responsible for selling our Lam products portfolio as well as parts and service contracts to dedicated accounts. Working under close supervision of Global Account Sales Manager. Develops sales strategy of assigned accounts according to corporate sales programs and products strategies. Ensures to achieve continuous customer satisfaction and targeted sales goals by performing successful sales activities.

What You’ll Do

Contacts and meets with assigned customers to define current and future needs and promote Lam products and services.
Contributes to develop plans and strategies to sell our products to capitalize on growth and new market share.
Provides and maintain accurate sales forecasts aligned with customers investment plan.
Work in full autonomy performing planned, systematic and pro-active sales activities to ensure and/or to enlarge sales for dedicated account. Supports in presentations, participates in user-meetings and follows-up pre-/post sales activities.

Contributes to negotiate systems/retrofits/contract to close orders. Working closely with Global Account Manager and Field Operations to define Machine Configuration, Product Specifications and time frame to secure the project.
Ensures conformity of Machine Configuration with Purchase Order and tool specifications; communicates changes on time if any.
Plans, organizes customers visits and align objectives with all relatives managements and departments involved. Report outcomes and define and track actions plan.
Report on regular basis situation of dedicated accounts to Global Account Sales Manager, analyze results and gaps and propose solutions if needed.
Communicate sales projects and results to involved products line and Field Operation to give them visibility and plan for the right resources.
Monitors cash collection status and escalate outdated payment when needed.
Maintains appropriate account database including key customer decision makers, org charts and all relevant information related to customers business/projects.
May perform other related duties as assigned or requested.

Who We’re Looking For

Degree in electromechanical, electronics, electrical engineering and additional transversal education in Marketing, Sales /Business Administration.

Minimum Experience in the Semiconductor Industry at Customer Service on-site, sales and marketing experience, team management and leadership of a minimum 5 years.

Preferred Qualifications

Excellent written/verbal communication
Fluent in English
Strong presentation skills and PS&DM skills
Autonomy
Teamwork
Customer management
Ability to establish successful relationships in a multicultural environment with external and internal customers
Internal and external service orientation required
Capability to prepare and execute business plans

Our Commitment

Field Service Engineer 3 (Meylan, FR)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will be based in our office in Meylan but mainly working on customers sites.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Troubleshoot and create customer response action plans to support customer needs.
Transparently discuss opportunities and challenges with customer to increase trust.
Provide technical instruction and mentoring for more junior engineers.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field and 5+ years of experience; or Master’s degree with 3+ years; or equivalent work experience.
Previous experience in installation, maintenance, repair, or troubleshooting of semiconductor capital equipment.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Communication skills, both written and verbal, in French and in English.
Foundational analytical and problem-solving skills.

Our Commitment

RF Engineer 2 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

As an RF Engineer at Lam, you play a crucial role in designing, building, and troubleshooting cutting-edge radio frequency (RF) solutions for power delivery and plasma generation in our Etch and Deposition products. You specialize in utilizing RF as a power source and creating innovative generator designs. Your work paves the way for new power sources to be used in Lam's wafer fabrication equipment.

What You’ll Do

The RF Engineer designs, develops, modifies, and evaluates electronic parts, components, or integrated circuitry for electronic equipment, other hardware systems, and electrical engineering applications. They determine design approaches and parameters, analyze equipment to establish operating data, conduct experimental tests, and evaluate results. They select components and equipment based on analysis of specifications and reliability. Additionally, they may review vendor capabilities to support product development.

You will be responsible for performing professional electrical engineering research, design, development, modification, and evaluation in support of electrical and electro-mechanical systems/subsystems.
You will work with a multidisciplinary engineering design team: electrical, mechanical, software, process, technical support, and suppliers, on the design and modification of custom and OEM embedded systems components.
You will need to prepare and analyze test plans and procedures to ensure that technical and operational requirements are met and properly demonstrated.
You will be responsible for the collection and analysis of pertinent material and data in preparation for your presentation at design, project, and program reviews.
Primarily responsible for the design, selection, testing, and documentation of RF delivery systems (100kHz to 100MHz; Watt to KiloWatt ranges).

Who We’re Looking For

Minimum Qualifications:

Bachelor's degree with 2+ years of related work experience; or an advanced degree without experience; or equivalent work experience.

Preferred Qualifications

Must have experience with complex RF measurement equipment (Power Meters, Network Analyzers, Impedance Analyzers, Spectrum Analyzers, etc.).
Familiarity with high voltage (>1KV) design rules/practices DC – 100MHz is also desired.
SPICE, LabView, MathCAD or MatLab, and analysis tools (e.g., HFSS, Comsol, Microwave Studio) experience is preferred.
Experience in or fundamental knowledge of plasma processing, plasma sources, and plasma loads is a plus.
Excellent communication and presentation skills.
Outstanding analysis and troubleshooting skills.
Ability to drive functional requirements and execute in a dynamic team environment.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Laboratory Service Engineer 2 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Laboratory Service Engineer at Lam, you are a pivotal force in maintaining and upgrading equipment in our applications lab. It’s not a typical lab; you’ll be hands-on with state-of-the-art equipment, performing maintenance, troubleshooting, and calibration. You'll support innovative equipment by providing installation and documentation, making you an integral part of our technology’s success. In this role, you will contribute to concept and feasibility hardware to enhance current and develop the next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment, performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required personal protective equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in a technical field with 2+ years of experience; or Associates degree in a technical field or equivalent military training with 4+ years of relevant experience; or equivalent work experience.

Preferred Qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient in the use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment or a cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 2 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Process Engineer at Lam, you will operate on cutting-edge technology, harnessing atomic precision, material science, and surface engineering to push technical boundaries. Your role involves developing new and advanced process formulations, defining equipment hardware to meet processing requirements, evaluating test data, and coordinating design requirements to ensure compatibility of processing methods. Your expertise and knowledge play a crucial role in our customers' success, making an impact on the next generation of semiconductor breakthroughs. In this role, you will directly contribute to the Deposition Products Group.

What You’ll Do

Be a part of the exciting Sabre 3D process and technology team. Our mission is to advance and innovate WFE (wafer fab equipment) electrodeposition process and technology in the field of advanced wafer-level packaging. This process engineer position entails working in the areas of process, equipment systems, and technology.

Perform professional process engineering research, development, and evaluation in support of the Sabre 3D and related systems.
Involvement may begin at any step from the conception phase to supporting and making improvements to released processes and products.
Conceive and plan projects involving the definition and selection of new concepts and approaches in the development of new or modified processes, reactor design, and system functionalities.
Engage with the engineering and technical staff community.
Design and execute experiments and tests.
Compile and evaluate data to develop working models and specifications.
Formulate, optimize, and determine appropriate variables, targets, and limits of process and equipment specifications.
Support process and product performance demonstration activities such as planning, development, data collection, analysis, and technical reports.
Provide leadership by acting as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 2+ years of related work experience; or an advanced degree without experience; or equivalent work experience.

Preferred Qualifications

Hands-on experience working with wet chemistry.
Skilled in electrochemistry.
Knowledgeable in fluid mechanics, transport, surface science, and analytical techniques.
Interest in advanced technology and a continuous desire to learn.
Strong organizational skills and demonstrated ability to manage multiple tasks simultaneously, with the ability to adapt to shifting priorities to meet business needs and deadlines.
Proven ability to work effectively and efficiently with diverse teams, customers, and both internal and external partners, with a collaborative mindset suited for a matrix environment.
Experienced in working with processing or SEMI equipment.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer 2 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Mechanical Engineer at Lam, you design and define cutting-edge mechanical and electro-mechanical systems. Your role involves conducting feasibility studies, testing, and guiding teams in detailed design and fabrication. You provide crucial design information needed to shape our technology's packaging. In this role, you will directly contribute to the Deposition Products Group.

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization, including conceptualization, designing, CAD modeling, development, and test/validation.
Design components using a variety of metals, ceramics, quartz, plastics, and advanced coatings.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis, including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with internal teams for procurement and assembly of components and equipment.

Who We’re Looking For

Minimum Qualifications:

Bachelor's degree in Mechanical Engineering or a related field with 2+ years of related work experience; or an advanced degree without experience; or equivalent work experience.
Proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills.
This is a graduate-eligible role.

Preferred Qualifications

Experience in the semiconductor industry is a plus.
Experience in project management or problem-solving while managing time and multiple priorities.
Excellent communication skills, both written and verbal, and technical presentation skills.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Electrical Engineer 2 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

Join Lam as an Electrical Engineer, and you'll be at the forefront of designing and developing electronic solutions for advanced applications. Your role involves designing and analyzing equipment, conducting experimental tests, and evaluating results to create reliable, cutting-edge solutions.

What You’ll Do

Design and develop electrical systems, sub-systems, and/or solutions, applying engineering methods to design.
Contribute to research and development efforts by collecting and analyzing data to improve electrical system designs.
Assist with the development of functional specifications for electrical/electro-mechanical systems and power distribution components.
Collaborate with cross-functional engineering design teams to design and modify custom and OEM system components.
Perform hands-on testing and validation utilizing lab equipment to characterize the performance of electrical/electro-mechanical systems.
Prepare high-quality reports and technical presentations to clearly communicate design intent, analysis, and results to diverse audiences in design reviews.

Who We’re Looking For

Minimum Qualifications:

Bachelor's degree in Electrical Engineering or a related field with 2+ years of related work experience; or an advanced degree without experience; or equivalent work experience.
Hands-on experience in electronic circuit design (analog, digital), signal and controls theory, development, and associated electrical board design, troubleshooting, and validation.
Understanding of AC/DC power distribution systems.
System-level understanding of electrical architecture, system integration, and applications.
Working knowledge in printed circuit board (PCB) and low voltage circuit design for power and control applications.
Knowledge in the application of power and controls technologies for systems automation.
Knowledgeable in CAD tools for circuit design and simulation (e.g., PCAD, ORCAD, ZUKEN, AutoCAD, SPICE, ADS, HFSS).
This is a graduate-eligible role.

Preferred Qualifications

Familiar with design for serviceability, manufacturability, and reliability.
Skilled at troubleshooting systems with tools like network sniffers, protocol analyzers, and tool logs.
Understanding of troubleshooting with problem-solving techniques such as 5-why, 8D, fishbone diagrams, etc.
Excellent oral and written communication skills, including technical presentations.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Laboratory Service Engineer (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will contribute to concept and feasibility hardware to enhance current and develop next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required Personal Protective Equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in a technical field with 2+ years of experience; or Associates degree in a technical field or equivalent military training with 4+ years of relevant experience; or equivalent work experience.
This is a graduate eligible role.

Preferred Qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to product innovation that is targeted for the advanced packaging industry.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.
Develop Best Known Methods (BKMs) for electroplating processes targeted for Wafer-Level-Packaging (WLP) and Through-Silicon-Via (TSV) applications
Drive improvements in plating reactor performance
Characterize Cu, Ni, SnAg and Au plating bath chemistries and plated films
Trouble-shoot complex integration issues with key customers
Perform fundamental electrochemical studies such as cyclic voltammetry with various plating chemistries

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.
This is a graduate eligible role.

Preferred Qualifications

Familiarity with working in a wet laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in electrodeposition methods
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

IND123 #LI-CW1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

RF Engineer 3 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

The RF Engineer designs, develops, modifies, and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. Determines design approaches and parameters. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development.

What You’ll Do

You will be responsible for performing professional electrical engineering research, design, development, modification, and evaluation in support of electrical and electro-mechanical systems/subsystems.
You will work with a multidisciplinary engineering design team: electrical, mechanical, software, process, technical support, and suppliers, on the design, modification, of custom and OEM embedded systems components.
Primarily responsible for design/selection, testing and documentation of RF delivery systems (100kHz to 100MHz; Watt to Kilowatt ranges).
You will need to prepare and analyze test plans and procedures to assure that technical and operational requirements are met and properly demonstrated.
You will be responsible for the collection and analysis of pertinent material and data in preparation of your presentation at design, project, and program reviews.

Who We’re Looking For

Minimum Qualifications:

Typically requires a minimum of 5 years of related experience with a Bachelor’s degree; or 3 years and a Master’s degree; or a PhD without experience; or equivalent work experience in Electrical Engineering or Physics.
Must have knowledge of EM fields theory and RF metrology (Power Meters, Network-, Impedance- and Spectrum Analyzers, etc.).
Familiarity with high voltage (>1kV) design rules/practices DC – 100MHz is also desired.
SPICE, LabView, MathCAD or MatLab, and analysis tools (i.e. – HFSS, Comsol, Microwave Studio) experience preferred.
Experience in or fundamental knowledge of plasma processing, plasma sources and plasma loads is a plus.
Excellent communication and presentation skills
Outstanding analysis and trouble-shooting skills
Ability to work and accomplish tasks individually as well as in a dynamic-teams environment
This is a graduate eligible role.

Our Commitment

IND123 #LI-CW1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

RF Engineer 5 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

The RF Engineer designs, develops, modifies, and evaluates electronic components, parts, or integrated circuits for electronic equipment, hardware systems, or electrical engineering applications. Responsibilities include determining design approaches and parameters, analyzing equipment to establish operating data, conducting experimental tests, and evaluating results. The engineer selects components and equipment based on specification analysis and reliability considerations, and may also review vendor capabilities to support product development.

What You’ll Do

Responsible for performing professional electrical engineering research, design, development, modification, and evaluation in support of electrical and electro-mechanical systems and subsystems.
Collaborate with a multidisciplinary engineering design team—including electrical, mechanical, software, process, technical support, and suppliers—on the design and modification of custom and OEM embedded systems components.
Prepare and analyze test plans and procedures to ensure technical and operational requirements are met and properly demonstrated.
Collect and analyze pertinent material and data in preparation of data for presentation at design, project, and program reviews.
Primarily responsible for the design, selection, testing, and documentation of RF delivery systems (100kHz to 100MHz; Watt to KiloWatt ranges).

Who We’re Looking For

Bachelor’s degree with a minimum of 12 years of related work experience; master’s degree with 8 years of experience; PhD with 5 years of experience; or equivalent experience.
Must have experience with complex RF measurement equipment (Power Meters, Network-, Impedance- and Spectrum Analyzers, etc.).
Excellent communication and presentation skills.
Strong analytical and troubleshooting abilities.
Strong analytical and troubleshooting abilities.
Ability to drive functional requirements and execute in a dynamic-teams environment.
Ability to drive functional requirements and execute effectively in dynamic, cross-functional team environments.

Preferred Qualifications

Familiarity with high-voltage design rules and practices (>1 kV) from DC to 100 MHz is also desired.
Experience with SPICE, LabVIEW, MathCAD, MATLAB, and analysis tools such as HFSS, COMSOL, or Microwave Studio is preferred.
Experience in, or foundational knowledge of, plasma processing, plasma sources, and plasma loads is a plus.

Our Commitment

#LI-NB1

#LI-NB1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

RF Engineer 4 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

You will be responsible for performing professional electrical engineering research, design, development, modification, and evaluation in support of electrical and electro-mechanical systems/subsystems.
You will work with a multidisciplinary engineering design team: electrical, mechanical, software, process, technical support, and suppliers, on the design and modification of custom and OEM embedded systems components.
You will need to prepare and analyze test plans and procedures to ensure that technical and operational requirements are met and properly demonstrated.
You will be responsible for the collection and analysis of pertinent material and data in preparation for your presentation at design, project, and program reviews.
Primarily responsible for the design, selection, testing, and documentation of RF delivery systems (100kHz to 100MHz; Watt to KiloWatt ranges).

Who We’re Looking For

Minimum Qualifications:

Bachelor's degree with 8+ years of related work experience; or a Master’s with 6+ years experience; or a PhD with 3+ years experience; or equivalent experience.

Preferred Qualifications

Must have experience with complex RF measurement equipment (Power Meters, Network Analyzers, Impedance Analyzers, Spectrum Analyzers, etc.).
Familiarity with high voltage (>1KV) design rules/practices DC – 100MHz is also desired.
SPICE, LabView, MathCAD or MatLab, and analysis tools (e.g., HFSS, Comsol, Microwave Studio) experience is preferred.
Experience in or fundamental knowledge of plasma processing, plasma sources, and plasma loads is a plus.
Excellent communication and presentation skills.
Outstanding analysis and troubleshooting skills.
Ability to drive functional requirements and execute in a dynamic team environment.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Laboratory Service Engineer 4 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Operate in an R&D environment, performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required personal protective equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in a technical field with 8+ years of experience; or Associates degree in a technical field or equivalent military training with 10+ years of relevant experience; or equivalent work experience.

Preferred Qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient in the use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment or a cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Electrical Engineer 4 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Design and develop electrical systems, sub-systems, and/or solutions, applying engineering methods to design.
Contribute to research and development efforts by collecting and analyzing data to improve electrical system designs.
Assist with the development of functional specifications for electrical/electro-mechanical systems and power distribution components.
Collaborate with cross-functional engineering design teams to design and modify custom and OEM system components.
Perform hands-on testing and validation utilizing lab equipment to characterize the performance of electrical/electro-mechanical systems.
Prepare high-quality reports and technical presentations to clearly communicate design intent, analysis, and results to diverse audiences in design reviews.

Who We’re Looking For

Minimum Qualifications:

Bachelor's degree in Electrical Engineering or a related field with 8+ years of related work experience; or a Master’s with 6+ years experience; or a PhD with 3+ years experience; or equivalent experience.
Hands-on experience in electronic circuit design (analog, digital), signal and controls theory, development, and associated electrical board design, troubleshooting, and validation.
Understanding of AC/DC power distribution systems.
System-level understanding of electrical architecture, system integration, and applications.
Working knowledge in printed circuit board (PCB) and low voltage circuit design for power and control applications.
Knowledge in the application of power and controls technologies for systems automation.
Knowledgeable in CAD tools for circuit design and simulation (e.g., PCAD, ORCAD, ZUKEN, AutoCAD, SPICE, ADS, HFSS).
This is a graduate-eligible role.

Preferred Qualifications

Familiar with design for serviceability, manufacturability, and reliability.
Skilled at troubleshooting systems with tools like network sniffers, protocol analyzers, and tool logs.
Understanding of troubleshooting with problem-solving techniques such as 5-why, 8D, fishbone diagrams, etc.
Excellent oral and written communication skills, including technical presentations.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer 4 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization, including conceptualization, designing, CAD modeling, development, and test/validation.
Design components using a variety of metals, ceramics, quartz, plastics, and advanced coatings.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis, including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with internal teams for procurement and assembly of components and equipment.

Who We’re Looking For

Minimum Qualifications:

Bachelor's degree in Mechanical Engineering or a related field with 8+ years of related work experience; or a Master’s with 6+ years experience; or a PhD with 3+ years experience; or equivalent experience.
Proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills.
This is a graduate-eligible role.

Preferred Qualifications

Experience in the semiconductor industry is a plus.
Experience in project management or problem-solving while managing time and multiple priorities.
Excellent communication skills, both written and verbal, and technical presentation skills.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 4 (Tualatin, OR)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Process Engineer at Lam, you will operate on cutting-edge technology, harnessing atomic precision, material science, and surface engineering to push technical boundaries. Your role involves developing new and advanced process formulations, defining equipment hardware to meet processing requirements, evaluating test data, and coordinating design requirements to ensure compatibility of processing methods. Your expertise and knowledge play a crucial role in our customers' success, making an impact on the next generation of semiconductor breakthroughs. In this role, you will directly contribute to the Deposition Products Group.

What You’ll Do

Perform professional process engineering research, development, and evaluation in support of the Sabre 3D and related systems.
Involvement may begin at any step from the conception phase to supporting and making improvements to released processes and products.
Conceive and plan projects involving the definition and selection of new concepts and approaches in the development of new or modified processes, reactor design, and system functionalities.
Engage with the engineering and technical staff community.
Design and execute experiments and tests.
Compile and evaluate data to develop working models and specifications.
Formulate, optimize, and determine appropriate variables, targets, and limits of process and equipment specifications.
Support process and product performance demonstration activities such as planning, development, data collection, analysis, and technical reports.
Provide leadership by acting as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 8+ years of related work experience; or a Master’s with 6+ years experience; or a PhD with 3+ years experience; or equivalent experience.

Preferred Qualifications

Hands-on experience working with wet chemistry.
Skilled in electrochemistry.
Knowledgeable in fluid mechanics, transport, surface science, and analytical techniques.
Interest in advanced technology and a continuous desire to learn.
Strong organizational skills and demonstrated ability to manage multiple tasks simultaneously, with the ability to adapt to shifting priorities to meet business needs and deadlines.
Proven ability to work effectively and efficiently with diverse teams, customers, and both internal and external partners, with a collaborative mindset suited for a matrix environment.
Experienced in working with processing or SEMI equipment.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Field Service Engineer 2 (Agrate, IT, 20041)

The Group You’ll Be A Part Of

The Impact You’ll Make

First, please note that this role is based in Agrate.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Italian is a requirement. Good level of english is needed.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

TW Engineer - FS II (CST) (Tainan, TW-Tainan-01, TW, 74147)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Field Service Engineer (Xian, CN-Xian-03, CN)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Analyze, troubleshoot, conduct diagnostics, isolate issues, and solve problems across a broad range of Lam products to the component level to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Perform field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Partner directly with customer at a management and engineer levels, run customer meetings, measure customer trust, and lead improvement programs.
Transparently discuss opportunities and challenges with customer to increase trust.
Provide technical instruction, leadership, and mentoring for more junior engineers.
Coach and delegate to more junior employees to ensure project completion on time.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field and 8+ years of experience; or Master’s degree with 6+ years; or equivalent work experience.
Previous experience in installation, maintenance, repair, or troubleshooting of semiconductor capital equipment.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Communication skills, both written and verbal, in English.
Solid analytical, problem solving, and decision-making skills.

Our Commitment

Field Process Engineer (Beijing, CN-Beijing-02, CN)

The Group You’ll Be A Part Of

The Impact You’ll Make

At Lam, as a Field Process Engineer you are a customer-focused expert on our equipment, pushing the boundaries to meet customer needs. You’re responsible for completing process support, evaluation, and documentation of process outputs for hardware modifications and upgrades. You play a vital role in supporting the customer in installations, training, and identifying design improvements with product groups.

In this role, you will directly contribute to ___.

What You’ll Do

Provide process support, installation, resolve and improve process/system/productivity, and develop processes of new applications of Lam equipment at customer sites.
Serve as key field support for Beta sites, evaluations, or first-in-fab installations.
Design and conduct experiments, collect data, analyze results, generate reports, and provide recommendations to optimize device architecture and process modules.
Partner with customers to meet requirements for new technology process, to support existing processes, and to address process deviations through root cause analysis.
Develop new or modified processes, define best known method process recipes, and partner with the hardware engineering to define chamber requirements and characterize hardware designs to meet customer performance requirements.
Collaborates with cross-functional teams and customers to understand their needs, technology roadmaps, process flow, requirements, and business challenges.
Represent Lam to our valued customers and deliver exceptional customer satisfaction.
Present technical and marketing materials with a win-win mindset to keep customers informed about products and services to address their needs.
Provides technical leadership, support, and instruction for Field Service Engineers, Technicians, sub-contractors, and customers on installs, repairs, operations, and coordinates application of new procedures.
Collaborate with Field Service Engineers on complex problems impacting process output.
Coordinates statistical analysis of failure rates and develops continuous improvement plan (CIP).
Recommends design changes to key technical solutions, and process development, and monitors performance trends.

Who We’re Looking For

Minimum Qualifications:

PhD in Electronics, Chemistry, Physics, Material Science, or related field; or Masters of Science with 3+ years of relevant work experience; or Bachelors of Science with 6+ years of work experience.
Proficiency in computer applications, including data analysis tools, word processing, spreadsheet, and presentation software.
Excellent communication, written and verbal, and customer relationship skills.
Ability to work in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit, and on-call if needed.

Preferred Qualifications

In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Effective organizational skills and ability to manage multiple tasks simultaneously, reacting to shifting priorities, and meeting business needs and deadlines.
Excellent interpersonal skills with the ability to work effectively with diverse teams, customers, and partners.
Collaborative mindset in matrixed environment.

Our Commitment

Laboratory Service Engineer (California, California)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will contribute to concept and feasibility hardware to enhance current and develop next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required Personal Protective Equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in a technical field with 2+ years of experience; or Associates degree in a technical field or equivalent military training with 4+ years of relevant experience; or equivalent work experience.

Preferred Qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $25.00 - $55.29.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Technical Instructor (all genders) (Villach, AT)

The Group You’ll Be A Part Of

The Impact You’ll Make

Are you energized by taking on new challenges? Do you have a passion for shaping a skilled workforce and advancing innovation? Do you want to work in an industry responsible for transforming how the world works, learns, and connects? Then you might be just what we are looking for.

Supporting the Idea to Retire (I2R) Digital Transformation (DT) workstream, the I2R Technical Instructor is responsible for delivering comprehensive training programs for our product development team members as they adopt new systems and new ways of working. You will be responsible for equipping our employees with the knowledge and skills they need to excel in their roles and contribute to our cutting-edge projects. This position requires a deep understanding of high-tech product design and development engineering and processes, excellent communication skills, and a passion for teaching and mentoring.

What You’ll Do

Collaborate with DT transformational change management (TCM), I2R, and functional teams to assess learning content.
Deliver technical training tailored to the needs of our product development and engineering team members.
Collaborate with subject matter experts and content creators to enhance training materials, including presentations, manuals, e-learning modules, and hands-on exercises.
Deliver impactful, meaningful, and relevant instruction through a blend of classroom instruction, virtual training, workshops, hands-on sessions, and one-on-one coaching.
Assess the effectiveness of training programs through evaluations, feedback, and performance metrics, and recommend improvements to enhance learning outcomes.
Provide support and guidance to employees, helping them troubleshoot technical issues and apply their learning to real-world projects.
Maintain training records and documentation, ensuring compliance with company policies and standards.
Foster a positive and inclusive learning environment that encourages collaboration, innovation, and professional growth.
Work closely with Change Management, TCM, I2R, and other DT workstreams, and Organizational Learning and Development to ensure alignment and support for training initiatives.

Who We’re Looking For

Bachelor's degree in an engineering-related field (e.g., Engineering, Computer Science, Physics) with 5+ years of proven experience as a technical trainer for complex hardware engineering; or a Master's degree with 3+ years of experience; or a PhD without experience; or equivalent experience.
Knowledgeable in the use of product lifecycle management (PLM) applications.
Strong understanding of high-tech research and development processes, methodologies, and technologies.
Excellent communication and presentation skills; ability to explain complex concepts in a clear and engaging manner.
Proficiency in delivering training materials using tools and platforms, such as Microsoft Teams.
Ability to work collaboratively across organizational boundaries and leadership levels.
Passion for continuous learning.

Preferred Qualifications

Advanced degree in a related field.
Advanced experience with Siemens Teamcenter, SAP, and 3D CAD tools.
Experience working in complex product development environments with global technical teams, such as engineering and advanced research and development.
Experience with learning management systems (LMS), Cornerstone OnDemand (CSOD) a plus.

What We're Offering

This position will be occupied in Villach. It is subject to the Austrian Collective Bargaining Agreement for Employees in the Metal Technology Industry in occupation group F depending on educational background. A higher payment is negotiable depending on expertise and skills. The monthly salary is paid 14 times per year. Please follow the link on the below section "Employment in Austria" for further information.

Villach - a great place to live and work

Follow the link www.welcome2villach.at and you will find on the spot the most important information about living, working and studying in and around Villach/Austria

Our Commitment

Global Product Support Engineer (all genders) (Villach, AT)

The Impact You’ll Make

As a Global Product Support Engineer at Lam, you're the backbone of technical support for field engineers, technicians, and product support personnel. Your expertise is crucial in diagnosing, troubleshooting, repairing, and debugging complex semiconductor equipment. Your swift action in responding to situations is critical in resolving issues and ensuring satisfaction of Lam’s valued customers.

What You’ll Do

Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
Installations and/or relocations of equipment at customers’ sites.
Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
Assist in complex field modifications and updates as released in Engineering Change Notifications.
Maintain records and reports as required to properly coordinate activities with supervisors and customers.
Assist in the planning, management, and execution of projects of a limited scope and duration
Providing high-quality on-site support for repair and maintenance service of complex electro-mechanical systems.
Assists with the full installation and relocation processes, including system start-up services

Who We’re Looking For

Technical education in electronics, engineering or other applicable field (LAB/HTL)
Work experience would be an asset but not a requirement
Able to work rapidly for prolonged periods of time, including bending, stooping, reaching, walking, sitting and standing in one location
Understand and work from electrical and mechanical schematics and diagrams
Ability to interpret operation manuals to determine root cause of tool failures
Experience in Microsoft Office Suite
Work independently, cooperatively in a team or with customers completing assignments with minimal supervision and a high degree of accuracy and attention to detail
Perform effectively in a demanding environment with changing workloads
Adhere to customer rules and policies regarding worksite behavior and safety
Able to travel frequently

What We're Offering

This position will be occupied in Villach. It is subject to the Austrian Collective Bargaining Agreement for Employees in the Metal Technology Industry in occupation group D or E, depending on Education. A higher payment is negotiable depending on expertise and skills. The monthly salary is paid 14 times per year. Please follow the link on the below section "Employment in Austria" for further information.

Villach - a great place to live and work

Follow the link www.welcome2villach.at and you will find on the spot the most important information about living, working and studying in and around Villach/Austria

Our Commitment

Global Product Support Engineer (all genders) (Villach, AT)

The Impact You’ll Make

What You’ll Do

Responsible for providing quality on-site repair and maintenance service of complex electro-mechanical systems. Analytical troubleshooting of technical problems to component level. Performs complete installation/relocation start-up services
Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
Installations and/or relocations of equipment at customers’ sites.
Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
Assist in complex field modifications and updates as released in Engineering Change Notifications.
Maintain records and reports as required to properly coordinate activities with supervisors and customers.
Planning, management, and execution of projects of a limited scope and duration

Who We’re Looking For

Technical education in electronics, engineering or other applicable field of study (HTL/Bachelor)
min. 3 years of equivalent work experience
Able to work rapidly for prolonged periods of time, including bending, stooping, reaching, walking, sitting and standing in one location
Understand and work from electrical and mechanical schematics and diagrams
Ability to interpret operation manuals to determine root cause of tool failures
Experience in Microsoft Office Suite
Work independently, cooperatively in a team or with customers completing assignments with minimal supervision and a high degree of accuracy and attention to detail
Perform effectively in a demanding environment with changing workloads
Adhere to customer rules and policies regarding worksite behavior and safety
Able to travel frequently

What We're Offering

This position will be occupied in Villach. It is subject to the Austrian Collective Bargaining Agreement for Employees in the Metal Technology Industry in occupation group E, depending on Education. A higher payment is negotiable depending on expertise and skills. The monthly salary is paid 14 times per year. Please follow the link on the below section "Employment in Austria" for further information.

Villach - a great place to live and work

Follow the link www.welcome2villach.at and you will find on the spot the most important information about living, working and studying in and around Villach/Austria

Our Commitment

Product Engineer (all genders) (Villach, AT)

What You’ll Do

Working within the Lab Operations organization will have as main duties the support of the daily lab tools operations.

Troubleshooting and regular maintenance of the lab equipment
Mechanical and electrical start-up of new lab tools
Support the process engineers in executing the customer demonstrations
Support the product development by conducting design validation tests and delivering improvement proposals
Documents the tools configuration and reports the tests results
Support LAB facilities and willingness to support LAB On-Call team

Who We’re Looking For

Accomplished Electrical or Mechanical apprenticeship training (LAB)
Technical high school degree such as HTL and FBS would be of advantage
Excellent electronic engineering skills
Good understanding of electrics and wiring schematics
Familiar with MS-Windows and MS-Office products
Good English oral and written communication skills
Structured and organized working style
Ability to work independently, high degree of flexibility and capable to work in a cross functional environment

Preferred Qualification

Work experience in the semiconductor manufacturing and/or at a semiconductor equipment suppliers
Experience in the handling of hazardous chemicals and gases
Experience with pneumatic systems and robotics

What We're Offering

This position is subject to the Austrian Collective Bargaining Agreement for Employees in the Metal Technology Industry in occupation group D or E depending on educational background. A higher payment is negotiable depending on education, expertise and skills. The monthly salary is paid 14 times per year. Please follow the link below in the "Employment in Austria" section for further information.

Villach - a great place to live and work

Follow the link www.welcome2villach.at and you will find on the spot the most important information about living, working and studying in and around Villach/Austria.

Our Commitment

Operational Technology Lead (all genders) (Villach, AT)

The Impact You’ll Make

Oversee the operation technology, Manufacturing systems ensuring they operate smoothly and efficiently. Collaborate with production teams to address IT-related issues impacting manufacturing processes. Implement and maintain IT solutions that enhance manufacturing efficiency and quality control. Ensure the security and reliability of manufacturing systems, including backups and disaster recovery plans.

What You’ll Do

Ensure OT projects are delivered on time and within budget, minimizing any impact on OT environments.
Act as a liaison between engineering and manufacturing OT business units, providing guidance on BU projects and ensuring adherence to Lam OT Standards and procedures.
Participate in global OT alignment meetings.
Collaborate with both engineering and manufacturing teams to address IT-related issues that affect production.- Implement and maintain IT solutions to enhance manufacturing efficiency and quality control.
Implement and maintain IT solutions to enhance engineering efficiency and quality control.- Ensure the security and reliability of all OT systems, including backups and disaster recovery plans.

Other Job Responsibilities

Oversee the OT Team and its dedicated assigned activities and duties.
This position may require occasional travel between business units or off-site locations.
Availability for on-call support or after-hours work may be necessary to address critical IT issues.

Who We’re Looking For

Bachelor’s degree in Business, Information Technology or related field (or equivalent work experience) >15 years working experience
Ability to utilize problem management database and systems to track and report on customer calls and requests
Strong logical and analytical skills
Strong verbal and written communication skills
Ability to demonstrate baseline security skills
Ability to troubleshoot and problem solve core service and support challenges while applying best practices for documentation, change management, and scripting
Ability to find root causes of problems and quickly determine efficient solutions
Experience in device security solutions
Proficiency with relevant business systems, operating systems and Office 365 environment
Good troubleshooting understanding of networking concepts (e.g. Systems, Protocols, Directory Services)
Make sure that the team can handle the daily OT tasks

What We're Offering

This position is subject to the Austrian Collective Bargaining Agreement (CBA) for Employees in the Metal Technology Industry in occupation group F. A higher payment is negotiable depending on expertise and skills. Please follow the link below in the Employment in Austria section for further information.

Villach - a great place to live and work

Follow the link www.welcome2villach.at and you will find on the spot the most important information about living, working and studying in and around Villach/Austria

Our Commitment

Lagermitarbeiter (all genders) (Villach, Villach)

Deine Aufgaben

Allgemeine Lagertätigkeiten
Ausführung physischer Aufgaben in Verbindung mit der Einlagerung, Kommissionierung und Verteilung von Waren
Heben von schweren Gegenständen (bis zu 15 kg) und Bedienung eines Gabelstapler

Wen wir suchen

Erfahrung im Bereich Logistik / Lager

Bevorzugte Qualifikationen

Erfahrung mit SAP Inventory Management und Warehouse Management Modulen
PC Grundkenntnisse inkl. MS Office (Excel, Word, Outlook)
Grundkenntnisse in Englisch

Die Einstellung erfolgt über ein Personalbereitstellungsunternehmen.

Diese Position unterliegt dem Kollektivvertrag für Angestellte in der österreichischen Metalltechnischen Industrie der Berufsgruppe C.

Eine höhere Bezahlung ist je nach Fachwissen und Erfahrung verhandelbar.

Villach - ein grossartiger Ort zum Leben und Arbeiten

Folgen Sie dem Link www.welcome2villach.at und finden Sie hier wichtige Informationen zum Leben, Arbeiten und Studieren in und um Villach/Österreich.

Supplier Engineer (all genders) (Villach, AT)

The Group You’ll Be A Part Of

This position is part of the Supplier Engineering and Technology team. SET is an organization that is innovative in manufacturing technology, materials and supply chain design. In this position, you, as a Supplier Engineer play a vital role with the suppliers. You will have the opportunity to work across organization functions to resolve technical, quality and production challenges, as well as opportunity to develop excellence in product design and manufacturing with mechatronics supply chain.

Candidate should be a result-driven, self-starter possessing strong interpersonal skills with a strong focus on supporting internal and external customers. This individual should also possess the ability to multitask in a fast-paced environment, to adapt to changing priorities and to work independently in a close-knit team setting.

What You’ll Do

Coordinate and support investigation of key quality defects of components from the customers and/or field service team to drive corrective actions and continuous improvement
Drive the improvement of the suppliers’ quality and manufacturing processes to ensure product quality, cost, and on-time-delivery
Act as liaison / technical lead for cross functional projects to include Build Verify and Production Readiness Review
Audit and document supply base performance on critical process of records and overall quality management systems
Collaborate on the continuous development of supply base through close teamwork with product management, global product group, and supplier business managers
Leads, and is personally accountable for, high profile project timelines and milestones.
Continuously working on process improvement and developing Best Known Methods
Provide technical support in Build, Test and FQA to suppliers in product deployment and transition
Perform Standardized Supplier Quality Audits and administer Supplier Quality Scorecard for existing suppliers to promote continuous improvement.
Drive Root Cause and Corrective Action Analysis on defects and Escalations

Who We’re Looking For

University degree in Electrical or Mechanical Engineering
Experience in the one of the following areas:
- Mechatronics/Automation/Robotics/Computers/Controllers/PCBA/Sensors/Detectors
- Fluid dynamics/Heaters/Pumps/Filters/Flow and Pressure Control; solid understanding of fluid mechanics, thermodynamics, mass/momentum/heat transfer
Creative thinking and strong problem solving and troubleshooting capabilities
Solid understanding of statistical process control and basic statistical analysis used in production setting
Solid understanding of equipment and component manufacturing processes
Experience in supplier process development & quality management
Understanding of failure analysis and problem solving
International & domestic travelling

Preferred Qualifications

Knowledge of Semiconductor equipment, Capital Equipment industry and its manufacturing processes.
Effective communication and presentation skills, both written and verbal, in English.
Statistical analysis skills including statistical process control and data analysis used in production setting.
Knowledge in Design Failure Mode and Effect Analysis (DFMEA).
Proven stakeholder management skills, with ability to influence both internal and external stakeholders or customers in technical matters.

What We're Offering

This position is subject to the Austrian Collective Bargaining Agreement for Employees in the Metal Technology Industry in occupation group F. A higher payment is negotiable depending on education, expertise and skills. The monthly salary is paid 14 times per year. Please follow the link below in the "Employment in Austria" section for further information.

Our Commitment

Deskside Support Team Lead (all genders) (Villach, AT)

The Group You’ll Be A Part Of

The Deskside Support Team Lead is responsible for overseeing the deskside support team, ensuring the delivery of high-quality IT support services to end-users. This role involves managing day-to-day operations, coordinating with other IT teams, and driving continuous improvement in service delivery in alignment with ITIL best practices.

What You’ll Do

Team Leadership: Lead, mentor, and manage the deskside support team, including L1 and L2 support engineers. Assign tasks, monitor performance, and provide regular feedback to team members. Foster a positive and collaborative team environment.

Service Delivery: Ensure timely and effective resolution of IT support requests and incidents. Monitor Deskside performance metrics and implement improvements as needed. Coordinate with other IT teams to ensure seamless service delivery.

Process Management: Develop and maintain standard operating procedures (SOPs) for deskside support. Ensure adherence to ITIL best practices and organizational policies. Identify and implement process improvements to enhance service efficiency and effectiveness.

Incident and Problem Management: Oversee the management of incidents and problems, ensuring root cause analysis and resolution. Maintain and update the Known Error Database (KEDB) and knowledge base.

Asset and Inventory Management: Ensure accurate tracking and management of IT assets and inventory. Coordinate with the Asset & Lifecycle Officer to manage asset lifecycle processes.

Training and Development: Provide training and development opportunities for team members. Ensure the team is up-to-date with the latest technologies and best practices.

Reporting and Documentation: Generate regular reports on Deskside performance, incidents, and asset management. Maintain accurate and up-to-date documentation of processes, procedures, and configurations.

Who We’re Looking For

Experience: Proven experience in IT support, with at least 2-3 years in a leadership or supervisory role. Familiarity with ITIL framework and best practices.

Technical Skills: Strong technical knowledge of IT hardware, software, and networks. Proficiency in Deskside and asset management tools. Experience with remote support tools and technologies.

Leadership Skills: Strong leadership and team management skills. Ability to motivate and mentor team members.

Analytical Skills: Strong analytical and problem-solving skills. Ability to analyze performance metrics and identify areas for improvement.

Communication Skills: Excellent verbal and written communication skills. Ability to communicate effectively with end-users and IT teams.

Organizational Skills: Strong organizational and time management skills. Attention to detail and accuracy.

What We're Offering

This position is subject to the Austrian Collective Bargaining Agreement for Employees in the Metal Technology Industry in occupation group E or F depending on educational background. A higher payment is negotiable depending on education, expertise and skills. The monthly salary is paid 14 times per year. Please follow the link below in the "Employment in Austria" section for further information.

Villach - a great place to live and work

Follow the link www.welcome2villach.at and you will find on the spot the most important information about living, working and studying in and around Villach/Austria.

Our Commitment

Instandhaltungs-/Inbetriebnahmetechniker/in (Salzburg, AT)

The Group You’ll Be A Part Of

SEMSYSCO is part of LAM Research since 2022

The Impact You’ll Make

Führt Funktionen aus, die mit allen Fertigungsvorgängen verbunden sind, einschließlich der Zusammenarbeit mit Ingenieuren bei Einrichtungs- und Kalibrierungsaufgaben sowie der Durchführung von Nacharbeiten und Qualitätsprüfungen im Zusammenhang mit der Produktion von Teilen, Komponenten, Unterbaugruppen und Endbaugruppen. Verwendet hochentwickelte Programme zur Erfassung und Auswertung von Betriebsdaten, um Online-Anpassungen an Produkten, Instrumenten oder Geräten durchzuführen.

What You’ll Do

Mitarbeit bei der Herstellung der Anlagen
Zusammenbau von komplexen Schaltungssystemen
Verkabelung und Verdrahtung von hochwertigen Anlagekomponenten
Durchführung von Anlagentests, Fehleranalyse und Fehlerbeseitigung
Qualitätskontrolle von mechatronischen Systemen
Aufbau und Parametrierung von Robotersystemen

Who We’re Looking For

Fachspezifische Ausbildung (HTL; Fachschule; Lehre) im Bereich Elektrotechnik oder Mechatronik; bzw. mehrjährige Erfahrung in diesen Bereichen
Erfahrung im Lesen von Schaltplänen
Englischkenntnisse und MS-Office-Kenntnisse von Vorteil
Ausgeprägte Team- und Kommunikationsfähigkeit
Eigeninitiative und Kreativität erwünscht
Neugier und Bereitschaft, sich in technische Aufgabenstellungen einzuarbeiten

Preferred Qualifications

Our Commitment

Instandhaltungs-/ Inbetriebnahmetechniker (all genders) (Salzburg, Salzburg)

The Group You’ll Be A Part Of

SEMSYSCO is part of LAM Research since 2022

The Impact You’ll Make

What You’ll Do

Mitarbeit bei der Herstellung der Anlagen
Zusammenbau von komplexen Schaltungssystemen
Verkabelung und Verdrahtung von hochwertigen Anlagekomponenten
Durchführung von Anlagentests, Fehleranalyse und Fehlerbeseitigung
Qualitätskontrolle von mechatronischen Systemen
Aufbau und Parametrierung von Robotersystemen

Who We’re Looking For

Fachspezifische Ausbildung (HTL; Fachschule; Lehre) im Bereich Elektrotechnik oder Mechatronik; bzw. mehrjährige Erfahrung in diesen Bereichen
Erfahrung im Lesen von Schaltplänen
Englischkenntnisse und MS-Office-Kenntnisse von Vorteil
Ausgeprägte Team- und Kommunikationsfähigkeit
Eigeninitiative und Kreativität erwünscht
Neugier und Bereitschaft, sich in technische Aufgabenstellungen einzuarbeiten

Our Commitment

Lam Research ("Lam" or the "Company") is an equal opportunity employer. Lam is committed to and reaffirms support of equal opportunity in employment and non-discrimination in employment policies, practices and procedures on the basis of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status(including pregnancy, childbirth and related medical conditions), gender, gender identity, gender expression, age, orientation, or military and veteran status or any other category protected by applicable federal, state, or local laws. It is the Company's intention to comply with all applicable laws and regulations. Company policy prohibits unlawful discrimination against applicants or employees.

Bilanzbuchhalter/in (Salzburg, AT)

The Group You’ll Be A Part Of

The Global Finance Group drives financial strategies based on expert understanding of Lam's breakthrough technologies, the semiconductor market, and the global business environment. They manage our company's financials and relationships with our investor community to ensure we have the strong financial foundation to fuel innovation and growth.

The Impact You’ll Make

At Lam, as an Accountant, you're central to managing and enhancing our accounting systems. With a keen eye for detail, you interpret financial reporting requirements, balance the books, and ensure accuracy of profit and loss, cash flow, income, and balance sheet statements. Your expertise extends to monthly report generation, supporting informed decision making. You contribute to Lam's financial accuracy and compliance.

What You’ll Do

•   General Accounting tasks such as Debitor/Creditor Accounting, Asset Management, Bank
•   Monthly Closes
•   Support in any internal and external Audits
•   Year End Preparations and contact person for Tax advisor and Auditors
•   Prepare audit documentation in a clear, concise, and timely manner
•   Participate in other projects or assignments as requested
•   Preparation of monthly declarations

Who We’re Looking For

•   Profound Accounting education with Accountant exam
•   SAP/NAVISION experience
•   Excellent writing and oral communication skills
•   Fluent English
•   Good problem solving abilities
•   Microsoft Office applications especially Excel

Preferred Qualifications

• Minimum of 5 years of related experience with a Bachelor’s degree in Accounting or Finance; or 3 years and an Accountant exam or equivalent work experience

Our Commitment

Field Service Engineer (all genders) (Salzburg, AT)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to the success of the PANEL-Salzburg business unit the center of excellence for advanced packaging wet chemical solutions a strategically acquired branch to expand LAMs technology portfolio and an investment into future technology.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Troubleshoot and create customer response action plans to support customer needs.
Transparently discuss opportunities and challenges with customer to increase trust.
Provide technical instruction and mentoring for more junior engineers.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field and 5+ years of experience; or Master’s degree with 3+ years; or equivalent work experience.
Previous experience in installation, maintenance, repair, or troubleshooting of semiconductor capital equipment.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Mechanical Engineer, Sr (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

As a Project Engineer, you will be part of the Engineering Operations under LIGHT GPE (Lam India Global Hardware Technology Global Products Engineering) group.

What You’ll Do

You will be helping to assure that Lam’s products are in compliance with EHS related product regulations. The process for compliance with any product regulation involves:

Reading the regulation directly as well as authoritative commentary, and obtaining external party advice, as needed.
Determining aspects of the regulation have a footprint on Lam design decisions and operational processes
Conducting discovery exercises to estimate the number of components, modules, systems or business processes that might have to be confirmed for compliance.
Developing a program and policy structure that will ensure ongoing compliance with the regulation.
Providing training material and review meetings to ensure stakeholders are sufficiently aware of the requirements and can realize or provided feedback to the program design.
In this role, you will work with leads for product compliance campaigns (and other stakeholders) to define, execute, and report on progress for specific task deliverables. It will be an on-going learning curve as new regulations and new information about the regulations, and the related Lam interaction with them, becomes known and priorities shift.

Who We’re Looking For

Minimum 2 years and up to 6 years of experience designing semiconductor capital equipment.
Minimum of Bachelor’s degree in Engineering
Applied knowledge (e.g., having done redesign for compliance, or compliance assessments) of product regulations such as REACH, RoHS, CE Marking, NFPA, EMC as it relates to capital equipment
Experience in applying SEMI safety standards to semiconductor manufacturing equipment
Familiarity with a few current regulations and related program aspects that Lam has in place.
Willingness to study available, but sometimes draft, information about a regulation to learn the basic technical topic and focus, and the requirements as they might relate to Lam products and operations.
Comfortable with often changing or somewhat vague priorities

Desired Skills

Excellent communication, both written and verbal, and technical presentation skills.
Excellent interpersonal and organizational skills
Experience in Semiconductor industry is a plus.
Experience in project management, or problem solving while managing time and multiple priorities.
Skilled at problem statements and SMART task descriptions
Very skilled in Excel, Power Point, Word and SharePoint
Adept at self-direction

Our Commitment

Mgr, Compensation/Benefits (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

We are seeking a seasoned Compensation and Benefits professional to join Lam’s global Total Rewards Center of Excellence (COE) team. The role will provide a broad range of consultation, analysis, program design, and process support to HR Business Partners, Recruiters, and business Leaders in India. This is a full-time, on-site flex position located in India, and reporting directly to the Compensation function and matrixed to Benefits (both incumbents located in the United States)

The Impact You’ll Make

The Compensation and Benefits Manager will play a major role in the promotion and expansion of our regional compensation, benefits, performance management, recognition, and well-being programs. Lam’s programs are designed to be competitive, cost effective, and consistent with Lam’s values, business goals, and global total rewards strategy.

Provides ongoing subject-matter support on areas such as advice and guidance during the annual compensation review cycle, compensation analysis, job and grade audits, incentive program design and implementation, training program development and program implementation, and overall compensation analysis and consulting
Serves as a liaison and subject-matter-expert on global and regional compensation and benefits programs with functional HRBPs, Compensation Partners, Benefits, HR Shared Services, and other COEs
Partners with HR Services on executing compensation, performance mgmt, and benefits programs for assigned region(s) and/or client group
Proactively monitors and measures the effectiveness of current compensation and benefits programs and recommends actions based on detailed analysis and market research (e.g., compression analysis), and assesses the impact of design alternatives for the target population as well as those not included
Provides support to other colleagues within Total Rewards as the need arises

What You’ll Do

Additional Responsibilities

Leads the educational roll-out, change management, and adoption of new and/or changing compensation and benefits programs
Ensures company compliance with all legal compensation and benefit requirements
Uses internal and external data to create reports, perform detailed analysis and modeling, and summarizes results in support of solving business issues
Consults on New College Graduate packages and new hire/transfer offers for experienced candidates; including performing peer analysis

Leads the annual performance management and compensation programs for assigned region(s) and/or client group
Works closely with global benefits team and broker on renewals and benefit design updates. Leads annual benefits enrollment and coordinates well-being programs locally in partnership with the head of global benefits
Manages regional benefits vendors and supports and/or drives annual benefits renewals for assigned region(s).
Contributes to various global total rewards projects and initiatives

Who We’re Looking For

Bachelor’s degree (MBA preferred) in Business, HR or a related field with a minimum of 12 years relevant experience in the Compensation function or other relevant experience utilizing analytical skills, such as in the Finance function

Preferred Qualifications

Substantial compensation and benefits knowledge with demonstrated progressive responsibilities, preferably in the high technology and/or manufacturing industry within global companies

Demonstrated English language verbal and written communication skills required

Competence in data analysis/modeling along with competence in global, broad-based compensation programs is required

Our Commitment

Electrical Engineer 2 (Bangalore, IN-Bangalore, IN)

Eligibility Criteria

Educational qualification: Bachelor of Electrical/Electronics Engineering, MTech is an added advantage.
Years of Experience: 4+ years of relevant experience in schematic & PCB design & testing, cable design

Primary Responsibility

Responsible for executing Electrical Engineering technical disciplines with primary focus on designing and modifying schematic and PCB layout.
Board Design, Electronics Circuits including microcontroller/FPGA based designs, sensor interfaces, analog signal conditioning circuits, power supplies, ethernet based communication interfaces, Wireless Interfaces, Wireless Chargers etc.
Creation of system interconnects diagram and electrical schematics diagram based on requirements received from cross-disciplinary teams
Own the Cable Designs, drafting of cables, creation of harness drawings
Work with cross-disciplinary teams (including mechanical, electro-mechanical, software, process, manufacturing engineers) for major projects with multi-national work environment.
Creating electrical schematics and PCB layouts based on requirements received from cross-disciplinary teams
Creating and releasing engineering drawings & bill of materials using Engineering Change Management process
Interacting with PG counterpart in US
Studying and recommending corrective solutions for technical issues of varying complexities.
Conducting Design review to get buy-in from all cross functional teams
Managing in a very dynamic and fast paced work environment with frequent updates, design packages with quick solutions etc.

Mandatory Skills required to perform the job:

Core PCB Design Expertise with OrCAD Allegro – designed complex boards 10-12 layers with SMD’s, BGA’s, through hole parts, placement, routing, setting up constraints, working with component library teams for PCB footprint
Performing Schematic Entry in OrCAD Design Entry and circuit understanding with op-amps, comparators, passive devices, sensor circuitry, semiconductors IC’s – microcontrollers/FPGA, power supplies (DC-DC Converters)
Working alongside EE, ME for planning the board, DFT philosophy, working with PCB vendors for design for manufacturability (DFM), mechanical packaging constraints and PCB stack-up
Ability to write test plans for PCB testing and ability to perform low level IO testing on sub-controller and devices, debugging board failures/issues
Creation of electrical schematic diagram for cables, knowledge of Zuken
Semiconductor domain knowledge would be a value addition

Our Commitment

Group Manager- GIS (Bangalore, IN-Bangalore, IN)

The group you’ll be a part of

The impact you’ll make

Provides leadership for those involved in the development, design and optimization of one or more information technology and systems functions supporting company business processes and technical information systems platforms. Responsibilities include, but are not limited to, analysis, selection and modification of enterprise systems, application software, installation of network hardware/software and database management. Provides direction for the effort required to protect the company’s data, tools and information systems. Ensures infrastructure architecture standards maximize efficiency and support platform compatibility. Usually requires subject matter knowledge of user group for practical application of system characteristics. Coordinates delivery of services to user groups and ensures IT service is uninterrupted. Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

What you’ll do

Who we’re looking for

Bachelor's degree or equivalent with 4-6 years of supervisory experience.

Preferred qualifications

Our commitment

Project Engineer (Bangalore, IN-Remote, IN)

Job Responsibilites

Maintaining product structures from conception through production using company’s PLM system
Coordinating with stake holders to manage release process of Product option changes
Initiating Business process changes, continuous improvement process regarding Product Structure and Engineering Change with the goal of improving efficiency and effectiveness
Executing Engineering Change Management like processing & reviewing Change Orders
Performing documentation requirement for all parts/assemblies to be included in the Engineering Change package to ensure accuracy, completeness, and adherence to change control policies & procedures and design drafting standards

Minimum Qualification

Bachelor’s in Mechanical / Production / Industrial engineering with 2 -4 years of relevant experience.
2+ years of Experience in Executing Engineering Change Management like writing Change Orders (CO), reviewing the Change Orders
Experience in creating Product Options
Problem solving & decision-making proficiency - Collaborating with stake holders to drive solution
Hands-on Experience in Creating and managing Bill of material (BoM)

Preferred Qualifications

Knowledge on Inventory control
Exposure to Semi-conductor industry related Engineering activities
Excellent working knowledge on MS office software such as Word, PowerPoint, Excel and Exposure on writing Excel Macros

Our Commitment

Mechanical Technical Lead Engineer (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

Etch Engineering India

The Impact You’ll Make

What You’ll Do

Primary Responsibilities:

Owning & executing medium-complex Mechanical sub-system projects to design, develop, optimize, & implement design solutions for advanced semiconductor processing equipment or similar capital equipment’s including Gas Delivery Systems, Vacuum/Exhaust systems. These projects would be driven as part of NPD, Continuous Improvement Programs (CIP), cost reduction and/or reliability improvement initiatives.
Highly skilled in working with interdisciplinary (analytical approach to problem-solving – statics, dynamics, thermal, flow, application of statistical methods or combinations of these, etc.) engineering departments in realizing project goals
Collaborate with both internal and external Cross Functional Teams (CFT) to ensure the product design meets its objectives, validate the design through performance testing & obtain approvals by following Product Development & Release (PDR) process.
Develops & presents reports/presentations of excellent quality that communicate design intent, analysis & validation at design reviews.
Develops & execute test plans that generate characterization data sufficient to understand and validate the performance of the design.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s in Mechanical Engineering with 6 to 8 years of relevant experience. (or)
Master’s in Mechanical Engineering with minimum 3 to 5 years of relevant experience
Hands on experience to take design from concepts (OEM components, sheet metal, metal machined & weld assembly, plastics & ceramics would be a big plus), detail engineering (Tolerance analysis, dFMEA, 8D problem solving, RCCA, 5-why, DFMA), test plan, testing, etc. & through detailed drawing, parts procurement, DFM interaction with suppliers, assembly, build verification, customer qualification with deeper understanding of issues faced, lessons learned and closure.
Ability to identify all technical risks and mitigate them through appropriate calculations; structural, strength, seismic, tipping, flow, thermal & combinations of these including sub-zero temperatures. Demonstrated ability to conduct design reviews, seek approval in collaboration with stakeholders to implement design
Ability to work well in a matrix organization with aggressive deadlines, ability to align on priorities, etc. while focused to realize end objective (NX, drawings, GD&T, standards, change mgmt. process)

Preferred Qualifications

Experience in Semiconductor industry is a plus.
Excellent verbal and written communication skills; ability to present design concepts to peers and management in a professional and effective way
Understanding Process & Instrumentation Drawings (P&ID)
Knowledge and exposure to ANSI, ASME, SAE, ISO, SEMI standards applicable to semiconductor industry.

Our Commitment

Supplier QA Technical Lead Engineer (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

As a leading global supplier of wafer fabrication equipment and services to the semiconductor industry, Lam Research develops innovative solutions that help our customers build smaller, faster, and more power-efficient devices.

We are a company comprised of people who work hard, deliver outstanding results and maintain a sense of humor during even the most challenging times. Our success results from our employees' diverse technical and business expertise, which fuels close collaboration and ongoing innovation. We know that our dynamic, global team of exceptional employees is essential to our continued growth.

Join the Lam Research team, where you can play a vital role in the future of electronics and write your own success story.

The Impact You’ll Make

As a Supplier Quality Assurance (QA) Engineer at Lam, you'll make an impact in ensuring suppliers manufacturing processes and products meet quality standards by designing, implementing, and maintaining quality assurance programs. You design methods for inspecting, testing, and evaluating production processes and finished products onsite at our global suppliers’ locations. By analyzing production data, you identify trends and partner with the supplier to resolve technical, quality and production challenges. Your expertise will help develop excellence in supplier product inputs supporting Lam's commitment to delivering high-quality and reliable products.

What You’ll Do

This position will be based out of Bangalore, directly reporting into the leader of Supplier Quality Manager in India, and closely working with Supplier and Global stakeholders (Supply Chain, Product Group, Manufacturing). This individual would be responsible for managing and executing strategical projects, continuous improvement (CI) initiatives and meet Project/Quality metrics of OEM and COTs commodity. Individual’s primary job responsibilities are listed below:

Manage complete commodity strategical activities to meet Global SET leadership expectations.
Responsible for handling critical customer issues and come up with innovative ideas to avoid repeats.
Drive projects to streamline and standardize the best practices across the assigned OEM suppliers to proactively to reduce the risk.
Collaborate cross functionally and globally to execute strategies. Clearly communicate across engineering specializations and different levels of the organization for strategy implementation.

Who We’re Looking For

Educational qualification: Bachelor’s/Masters degree in Mech/Prod/Electrical/Electronics Engineering

Years of Experience: Bachelor’s degree with minimum 8 years / Masters with minimum 6 years of relevant experience

Mandatory skills

Knowledge on OEM/COTs component manufacturing process and functions like, Manometers, Pumps, Regulators, Valves, Manifolds, Sensor assemblies, Fasteners, smart motors etc.
Ability to demonstrate problem solving and critical thinking skills. Familiarity with Power BI, 8D problem-solving methodology, GD&T symbols, Measurement System Analysis (MSA), Statistical Process Control (SPC) practiced at supplier end.
Demonstrated ability to work in cross-functional teams. Experience working in a dynamic, and fast paced business environment to execute the project and meet deliverables.
Hands on experience in coordinating with supplier and other stake holders to drive root cause and corrective action to meet customer expectations
Excellent communication and presentation skills.

Preferred Skills

Prior experience with MS office tools (ppt, excel, project), statistical tools (JMP, Minitab etc.)
Develop best practices/best known methods (BKMs) to improve the process
Experience in handling suppliers from remote location
Hands on experience in any ERP tools like SAP, Oracle
Project Management certification like PMP

Our Commitment

Mechanical Engineer, Sr. (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with internal teams to for procurement and assembly of components and equipment.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Mechanical Engineering or related field with 2+ years of experience; or an advanced degree without previous professional experience; or equivalent experience.
Proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills.
This is a graduate eligible role.

Preferred Qualifications

Excellent communication, both written and verbal, and technical presentation skills.
Experience in Semiconductor industry is a plus.
Experience in project management, or problem solving while managing time and multiple priorities.

Our Commitment

Business Operations Analyst 3 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

As an Operations Analyst at Lam Research, you will play a pivotal role in enhancing the operational effectiveness and efficiency of the Global Operations team. By employing analytical methodologies, you will guide decision-makers towards achieving operational excellence. Your contributions will be critical in driving improvements and optimizing processes within the organization.

The Impact You’ll Make

What You’ll Do

Develop, automate, and maintain comprehensive reports and dashboards in both Excel & Power BI.
Analyze datasets to provide insights and create visualizations that tell a compelling data story.
Ensure compliance with analytical standards and data governance policies to maintain data integrity and accuracy.
Challenge stakeholders to prioritize long-term, data-driven decisions over quick fixes.
Identify and communicate process gaps, providing data-driven recommendations to leadership.
Facilitate change management for data and process changes, ensuring smooth implementation and seamless rollout.
Measure and publish operational performance against established metrics and targets

Who We’re Looking For

Required Education:

Bachelor’s degree in business administration, operations management, supply chain, project management, finance, engineering, or a related field.

Minimum Qualifications:

Minimum 5+ years of experience in operations, focused on extracting and analyzing operational data to generate meaningful insights.
Advanced capability in data analysis tools and software, particularly Excel (including advanced functions such as Pivot Tables and Power Query) and/or Power BI.
Demonstrated ability to be a self-learner, continuously seeking out new knowledge and skills to overcome obstacles and enhance performance.
Excellent written and verbal communication skills.
Proven ability to manage multiple tasks and prioritize effectively.
Demonstrated ability to develop innovative, out-of-the-box solutions to complex business problems.
Basic understanding of business operations and processes.

Required Skills:

Operations, Excel (Advanced), Power BI, Data Analysis, Excellent Written and Verbal Communication Skills

Preferred Qualifications

Experience with Alteryx for data preparation, modelling, and advanced analytics.
Exceptional ability to analyze and optimize complex operational processes, driving significant improvements in efficiency and effectiveness.
Extensive experience in process mapping and workflow analysis, with a proven track record of identifying and implementing process enhancements.
Strong expertise in root cause analysis and corrective action planning, demonstrating the ability to resolve complex issues and prevent recurrence.

Preferred Skills:

Data Modelling, Workflow Analysis, Corrective Action, Change Management, Root Cause Analysis, Data Governance, Metrics/KPIs, Project Management

Our Commitment

Mechanical Program Lead Engineer (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

Etch Product Group - Powerbox Team

The Impact You’ll Make

In this role, you will directly contribute to the Etch Powerbox team in the development of Power distribution systems to the Semiconductor machines.

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
Designs components using variety of metals, plastics, and advanced thermal management systems.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
Provide technical guidance and mentoring to more junior engineers

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Mechanical Engineering or related field with 8+ years of experience; or Master’s degree with 6+ years’ experience; or equivalent experience.
Excellent communication, both written and verbal, and technical presentation skills.
Expert in sheetmetal design along with superior understanding of sheetmetal manufacturing processes.
Highly proficient in 3D CAD tools such as Siemens NX and others.
Hands-on experimental and design background coupled with solid engineering skills.

Preferred Qualifications

Experience in Semiconductor industry is a plus.
Experience in leading projects, or problem solving while managing time and multiple priorities.

Our Commitment

Program/Project Manager 4 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

Customer Change Control team part of Engineering Services.

The Impact You’ll Make

As a Program or Project Manager at Lam, you will play a pivotal role in driving projects/programs for Customer Change Control. You’ll be at the forefront of project initiation through delivery, using your expertise to coordinate cross-functional teams and ensure project are completed on time and within budget.

In this role, you will directly contribute to Publishing Part Change Notification to Customer

What You’ll Do

Controlled implementation of changes to Bill of Materials (BOM)
Analyzes reports and metrics for maintain process of Record for customer, reconciles data variances and uses that information to guide the identification of deviations from process of record and puts plan together with team to inform customer of upcoming changes
Works with cross functional team to maintain change records for supplier changes, supplier POR changes, obsolescence requests.
Interfaces with supply chain, Product Management, Spares and manufacturing operations team, customer services business group to track engineering changes
Own Key Product Indicators (KPI) and deliverables of the group
Prepare Part change notification based on Problem statement & proposed solution
Self-motivated individual contributor role and normally receives little instruction on day-today work, general instructions on new assignments
Starting new programs to support the strategic direction of the organization and engage in Continuous Improvement Processes (CIP)

Who We’re Looking For

Minimum Qualifications:

Years of Experience: Minimum 8-12 years of experience
Job Experience: Experience in any of the following areas: multinational high technology corporation, in operations (preferred), Supply chain management, Product Management, Engineering Change Management.
Education: Bachelor’s degree in Engineering or MBA (Supply Chain/Operations)
Candidates should be comfortable working in shift based on business needs. Shift timings 1:30pm to 10:30pm

Preferred Qualifications

Excellent knowledge and experience in life cycle analysis, Product Change Notification, Component Obsolescence management, supply chain management
Problem Solving & Decision Making - Proactively identify problems & drive solutions, make decisions which are based on the values and principles of the organization
Proven experience in Program Management and Project Management in technical or operations programs
Good understanding of BoM (Bill of Material) structure
Proficiency in SAP MM & SD, MS Office Skills (Excel, Word, PowerPoint, SharePoint)
Proven stakeholder management skills in a matrixed environment
Excellent verbal and written communication skills, able to communicate cross-functionally with a desire to work as part of a global team with high a degree of attention to details

Our Commitment

Program/Project Manager 2 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

Customer Change Control Team in Engineering Services

The Impact You’ll Make

In this role, you will directly contribute to Publish Part Change Notification to Customer.

What You’ll Do

Controlled implementation of changes to Bill of Materials (BOM)
Analyzes reports and metrics for maintain process of Record for customer, reconciles data variances and uses that information to guide the identification of deviations from process of record and puts plan together with team to inform customer of upcoming changes
Works with cross functional team to maintain change records for supplier changes, supplier POR changes, obsolescence requests.
Interfaces with supply chain, Product Management, Spares and manufacturing operations team, customer services business group to track engineering changes
Own Key Product Indicators (KPI) and deliverables of the group
Prepare Part change notification based on Problem statement & proposed solution
Self-motivated individual contributor role and normally receives little instruction on day-today work, general instructions on new assignments
Starting new programs to support the strategic direction of the organization and engage in Continuous Improvement Processes (CIP)

Who We’re Looking For

Minimum Qualifications:

Years of Experience: Minimum 2-5 years of experience
Job Experience: Experience in any of the following areas: multinational high technology corporation, in operations (preferred), Supply chain management, Product Management, Engineering Change Management.
Education: Bachelor’s degree in Engineering or MBA (Supply Chain/Operations)
Candidates should be comfortable working in shift based on business needs. Shift timings 1:30pm to 10:30pm

Preferred Qualifications

Excellent knowledge and experience in life cycle analysis, Product Change Notification, Component Obsolescence management, supply chain management
Problem Solving & Decision Making - Proactively identify problems & drive solutions, make decisions which are based on the values and principles of the organization
Proven experience in Program Management and Project Management in technical or operations programs
Good understanding of BoM (Bill of Material) structure
Proficiency in SAP MM & SD, MS Office Skills (Excel, Word, PowerPoint, SharePoint)
Proven stakeholder management skills in a matrixed environment
Excellent verbal and written communication skills, able to communicate cross-functionally with a desire to work as part of a global team with high a degree of attention to details

Our Commitment

Logistics Analyst 4 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Logistics Analyst at Lam, you'll orchestrate and streamline material flow, ensuring efficient supply chain operations and maintaining optimal inventory levels. Your role encompasses a broad set of responsibilities, including supply chain services, inventory control, and ensuring critical parts availability through enterprise warehouse and inventory systems. Your skilled analysis will support production planning and volume studies. Your expertise will be pivotal in optimizing Lam's logistics plans for seamless operations.

Job Responsibilities

You will be performing

Operations Support
1. Routing guide management
2. Ensure booking of shipments for respective Logistics Service Providers (LSP)
3. Track & tracing and exception handling: BN4L exception management
  1. Ability to quickly react to unforeseen events and communicate with stakeholders as needed
4. Freight Rate tender & Freight audit
5. BN4L exception management
6. Follow SOPs (Standard Operations Procedures) with great attention to detail

Other Job Responsibilities

SAP TMS Administration & Troubleshooting
1. User management (user set up, onboarding and ongoing support)
2. Work with core technical team and Training internal teams on new SAP TMS tools
3. Master data maintenance as needed
4. TMS troubleshooting and communication between the user base and TMS vendor regarding system performance and outages
5. Support standardization and documentation of processes (SOP creation) as needed
Analytics
1. Report generation and analysis turning data into actionable insights (improving transportation provider selection, route optimization, identifying cost reduction opportunities, etc.)
2. Continuous improvement based on lesson learned
3. Gain insight over carrier performance to evaluate trends and pursue advantageous alternatives

Minimum Qualifications

Bachelor’s degree in business, Operational research, supply chain, or related field with minimum 8-12 years working experience in any of the following areas: Global Logistics Project/Program mgt, Global Transportation & Trade operations in global environment. PMP certification will be added advantage (MBA or master’s preferred but not required).
Experience in managing international logistics in all modes of transportation (especially AIR Freight)
Experience in working with SAP & TMS tools (Transportation Management System)
Freight audit and pay tools
Excellent communication skills (written & verbal) & global exposure.
Note:
- Shift timings IST: S1 shift- 6am to 3pm / S2 shift:3pm to 12 pm
- Candidates should be comfortable working in shift based on business needs.

Our Commitment

Electrical Engineer 2 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Design and develop electrical systems, sub-systems, and/or solutions, applying engineering methods to design.
Contributes to research and development efforts by collecting and analyzing data to improve electrical system designs.
Assists with development of functional specifications for electrical/ electro-mechanical systems and power distribution components.
Collaborate with cross-functional engineering design teams to design and modify custom and OEM system components.
Perform hands-on test and validation utilizing lab equipment to characterization of the performance of the electrical/ electro-mechanical systems.
Prepare high-quality reports and technical presentations to clearly communicate design intent, analysis, and results to diverse audiences in design reviews.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electrical Engineering or related field with 2+ years of experience; or an advanced degree without previous professional experience; or equivalent work experience.
Hands-on experience in electronic circuit design (analog, digital), signal and controls theory, development and associated electrical board design, troubleshooting and validation.
Understanding of AC/DC Power distribution systems.
System level understanding of Electrical architecture, system integration, and applications.
Working knowledge in Printed Circuit Board (PCB) and low voltage circuit design for power and control applications.
Knowledge in application of power and controls technologies for systems automation.
Knowledgeable in CAD tools for circuit design and simulation (e.g., PCAD, ORCAD, ZUKEN, AutoCAD, Spice, ADS, HFSS).
This is a graduate eligible role.

Preferred Qualifications

Familiar with design for serviceability, manufacturability, reliability.
Skilled at troubleshooting systems with tools like network sniffers, protocol analyzers, and tool logs.
Understanding of troubleshooting with problem-solving techniques such as 5-why, 8D, fishbones, etc.
Excellent oral and written communication skills including technical presentations.

Our Commitment

Product Engineer 3 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

Product & Program Management

What are we looking for

At Lam, as a Product Engineer for Non-Standard-Requests (NSRs), you will be closely working with the Engineering, Product Management, Account Teams & Cross functional teams across global regions of Lam Research to manage all aspects of support for Productivity and Technology Upgrades to our global customers through Non-Standard requests.

NSR PE’s are key contributors to managing the NSR work flows through the process. The role serves as a liaison between external (AT, sales ops) and internal (engineering, GOps) customers, and drives efficiencies of the process as a whole, while executing / rejecting certain requests, or highlighting certain NSRs for option conversion.

Job Responsibilities

Review NSR submissions for completeness, accuracy and applicability, as well as follow up with requestors to clarify requirements, prior to processing forward to Product Managers for their approval/rejection.
Project manage NSRs based on requirements defined by Sales and Engineering to meet the customer’s application. Coordinate mechanical, electrical, and software engineering efforts.
Drive clarity in initial customer request. Confirm that Engineering has sufficient information to develop scope, quote and design. Review and translate customer requirements into engineering specifications including component impact analysis.
Confirm Customer Request Date (CRD) are realistic. If dates are inside Lead Time, understand and validate justification. Expedite, manage expectations/ communicate risks with Sales Ops, or reject the request
Reduce NSRs by interacting with PMs, Engineering, and other cross-functional teams to cancel redundant design activities
Work with Sales Ops & Product Managers to highlight NSR candidates for option conversion to POA (Product Option Architecture).

Minimum Qualifications

Bachelor’s degree in Mechanical / Automotive / Electrical /Industrial / Production Engineering with minimum 5 years of relevant experience (or) Master’s degree with minimum 3 years of relevant experience
Exposure to product structuring and configuration management
Experience with Hardware Configuration/Product Management
Experience with MRP system planning, ordering, and scheduling materials, preferably using SAP, preferred
Knowledge of Bill of Material structures and Engineering Change process
Excellent Presentation and communication skills (both written and verbal)
Ability to successfully interact with and coordinate across diverse parts of the organization, technical and non-technical

Preferred Qualifications

Experience in semiconductor capital equipment industry will be preferred
Strong analytical and problem-solving skills
Exposure to PDM / PLM systems

Our Commitment

Business Analyst Lead (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

The Impact You’ll Make

Join Lam as a Business Operations Analyst, where you'll spearhead process improvement initiatives. With your systems knowledge and business process acumen, you expertly collect and analyze data, evaluate processes, develop metrics, and identify root causes with data-driven indicators for future improvements. Organizing cross-functional project teams, you communicate team progress and survey best practices, showcasing your commitment to operational excellence at Lam.

What You’ll Do

Who We’re Looking For

Minimum of 5 years of related experience with a Bachelor’s degree; or 3 years and a Master’s degree; or a PhD without experience; or equivalent work experience.

Preferred Qualifications

Our Commitment

Mechanical Engineer 4 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

In the Global Products Group, we are dedicated to excellence in the design and engineering of Lam’s etch products. We drive innovation to ensure our cutting-edge solutions are helping to solve the biggest challenges in the semiconductor industry

The Impact You’ll Make

In this role, you will directly contribute to you will directly contribute to the design and development of sub-systems and assemblies used in Semi-conductor machines.

What You’ll Do

Responsible & accountable to execute multi-discipline (Mechanical, Thermal) & multi-domain (CFD, Ceramic materials, coating technologies) engineering problems with full ownership - Concept maturity, Engineering, Testing & Deployment
Responsible to lead a team of Engineers to drive engineering excellence, optimize and implement solutions for projects as part of trouble shooting at customer or supplier end, continuous improvement programs (CIP), cost reduction, reliability improvement and RCCAs
Support staffing, training, mentoring & coaching, and strategic planning to build capacity and capability.
Lead medium to high complex sub-system related projects with full ownership through product life cycle of mechanical and electro-mechanical systems from concept to productization including, designing, CAD modeling, development, and testing / validation..
Lead design reviews, project reviews and participate in technical discussions.
Collaboration with cross functional teams to develop robust design solutions.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Mechanical Engineering or related field with 8+ years of experience; or Master’s degree with 6+ years’ experience; or equivalent experience.
Excellent communication, both written and verbal, and technical presentation skills.
Highly proficient in 3D CAD tools such as Siemens NX

Preferred Qualifications

Experience in Semiconductor industry is a plus.
Experience in leading projects, or problem solving while managing time and multiple priorities.

Our Commitment

Business Systems Analyst 3 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

[GOPS] [LIGO] [Spares Planning][Planning Systems]

The Impact You’ll Make

As a Business Systems Analyst at Lam, you will be leading strategic Programs that identify business problems and provide systems solutions/ systems improvement analysis in the Spares Planning function. In your role, you will be closely working on financial reporting of E&O for the spares planning organization and accounting for the worldwide spares inventory

What You’ll Do

•   Monitoring and analyzing inventory levels, identifying trends, and forecasting demand to prevent excess buildup
•   Determining which parts are excess or obsolete, considering factors like shelf life, market demand, and potential for future use.
•   Creating and implementing strategies to manage excess and obsolete inventory, including sell-off programs, returns, or disposal.
•   Developing and implementing processes to optimize E&O management, including data analysis, reporting, and automation.
•   Should be experienced in SAP. Have a good understanding of interfacing excel, SAP, external forecasting tool (SPM provided by PTC).
•   Provides/defines input to Planning Systems Roadmap.

Who We’re Looking For

Engineering degree in the field of Industrial Production/Mechanical (APICS CSCP/CPIM preferred). An MBA with experience in Financial reporting of E&O and exposure to inventory management is mandatory with 6-10 years of experience.
Proficiency in relevant software (e.g., SAP ERP, inventory management systems).
Hands-On technical skills (like Advanced Excel, SQL Programming, Power BI, Power Apps)
Strong understanding of inventory management principles.
Experience with E&O (Excess & obsolescence) processes and strategies.
Ability to analyze data and identify trends.
Excellent communication and collaboration skills.

Preferred Qualifications

•   High energy, strong work ethic, adaptive, able to meet tight deadlines
•   Proven ability and skill set to analyze, document and improve business processes with sustained results
•   High level of customer interfacing skills, effective listener, professional and courteous
•   Excellent verbal and written communication skills, able to communicate cross-functionally
•   Strong interpersonal skills, with a desire to work as part of a team

Our Commitment

Data Analyst, Program Lead (Bangalore, IN-Bangalore, IN)

About LIDAS:

LIDAS (Lam India Data Analytics and Sciences) team is responsible to provide best-in-class analytics solutions that help improve business decisions in Global Operations and other business sub-functions across Lam. This Organization, a “Center of Excellence” (CoE), consists of a high-performing team of experts who collaborate cross-functionally and provide analytics solutions to various business functions to suit their business needs. This team strives to improve the productivity & efficiency of business processes through business analytics, data science & automation projects. The resulting projects help accelerate businesses/stakeholders in decision-making by providing data insights. The team continuously develops the required technical skills and business acumen to help solve complex business problems & Use Cases in the semiconductor, manufacturing, and supply chain domains for the company.

Eligibility Criteria:

Years of Experience: Minimum 9-12 years
Job Experience: Experience with Power Platform (Power Apps, Power Automate & Power BI)

Expert in Database and Data warehouse tech (Azure Synapse/SQL Server/SAP HANA)

Data Analysis/Data Profiling/Data Visualization

Educational: Bachelor’s Degree: Math/Statistics/Operations Research/Computer Science

Master’s Degree: Business Analytics (with a background in Computer Science)

Primary Responsibilities:

Ability to interact closely with Business Stakeholder on understanding their business requirements and converting them into opportunity.
Leading POCs to create break through technical solutions, performing exploratory and targeted data analyses.
Ability to Manage and support existing applications and implementing the best practices on timely Manner.
Designs, Develops, and Tests Data Models to import data from source systems to meet Project requirements
Effectively analyzes the heterogeneous source data and writes SQL scripts to integrate data from multiple data sources
Analyzes the results to generate actionable insights and presents the findings to the business users for informed decision making
Understands business requirements and develops dashboards to meet business needs
Adapts to the changing business requirements and supports the development and implementation of best-known methods with respect to data analytics
Performs Data mining which provides actionable data in response to changing business requirements
Migrates data into standardized platforms (Power BI) and builds critical data models to improve process performance and product quality
Owns technical implementation and documentation associated with datasets
Provides updates on project progress, performs root cause analysis on completed projects and works on identified improvement areas (like process, product quality, performance, etc.)
Provides post-implementation support and ensures the target project benefits are successfully delivered in a robust and sustainable fashion.
Builds relationships and partners effectively with cross-functional teams to ensure available data is accurate, consistent and timely
Independently manages expectations from stakeholders, optimally utilizes time for larger initiatives with minimal guidance on prioritization or dependencies
Provides mentorship and guidance to peers and junior team members

Mandatory Skills required to perform the job:

Knowledge on the software development lifecycle expert in translating business requirements into technical solutions; and fanatical about quality, usability, security and scalability
Strong Knowledge on Python and PySpark.
Specialist in Power Platform (Power Apps & Power Automate)
Expert in Reports & Dashboard development (Power BI) and ETL tools (SAP DS, SSIS)
Data Analysis skills, experience in extracting information from databases, Office 365
Knowledge of SAP systems (SAP ECC T-Codes & Navigation)
Expert in Data Base Development, Troubleshooting & Problem-solving skills (SQL Server, SAP HANA, Azure Synapse)
Experience in project requirements gathering and converting business requirements into analytical & technical specs.
Good understanding of business processes and experience in Manufacturing/Inventory Management domains
Knowledge in performing Root cause analysis and Corrective actions
Excellent verbal and written communication & presentation skills, able to communicate cross-functionally

Desirable Skills:

Agile/SCRUM development using any tools.
Understanding of enterprise server architecture, cloud platforms
Experience in advanced analytics techniques using Statistical analysis
Ability to deliver training and presentations in the area of expertise

Our Commitment

Mechanical Component Engineer, Sr. (Bangalore, IN-Bangalore, IN)

Minimum Qualifications

Bachelor’s in Mechanical Engineering with minimum 4 to 8 years of experience in Mechanical/ Electromechanical, component engineering alternate parts component qualification, testing and evaluation.

The Group You’ll Be A Part Of

Component Engineering Group - CEG CoE

Job Responsibilities

Identify and perform Mechanical and Electromechanical alternate/replacement parts qualification, testing and validation
Initiate and lead efforts to identify and qualify second sources for material availability, performance, cost reduction and reliability improvement.
Perform Alternate component search and provide a detailed Component comparison report and should be a decision maker on component attributes.
Provide inputs on component selection to new designs to improve product reliability by participating in design reviews and DFMEA.
Work with cross-functional teams (mechanical design, procurement, and manufacturing) to ensure compatibility.
Maintain a standardized parts library to optimize reuse and minimize part proliferation.
Collaborate with vendors and procurement teams to evaluate component availability, lead times, and pricing.
Evaluate component obsolescence/single-source-components risks and recommend interchangeable replacements(Form, Fit, Function compatible) to avoid supply chain disruptions.
Own the completed component evaluation, guide team on component related specification issues in finding solutions.

Mandatory Skills

Understanding of detailed manufacturing process and end to end parameters of Mechanical/ Electromechanical components such as Fittings, Tube & hose Assemblies, Fasteners & Hardware’s, Pressure switch, Pressure gauge, Valves, Flow Switch, Hydraulic & Pneumatic components, Precision components etc.
Expert knowledge in Mechanical component parameters and their significant impact on product performance.
Review and interpret component data sheets and its significance on product performance.
Understanding GD&T (Geometric Dimensioning and Tolerancing) and how tolerances affect mechanical assemblies.
Dealing with uncertainty during testing of alternate/replacement components
Working closely with design engineers, procurement, quality, and manufacturing teams to optimize component usage for DFM (Design for Manufacturability) and DFA (Design for Assembly).
Creating BOMs (Bill of Materials), specifications, and qualification reports.
CAD Software Knowledge, Preferably NX and Creo.

Desirable Skills

Experience with PLM, Library management and Various Industry standards such SEMI,DIN,ISO and ASME.
Experience with documentation standards.
Knowledge of Pneumatic Schematic, schematic, and mechanical component evaluation.
Familiarity with manufacturing and Design environments
Knowledge of BOM Management tools like Silicon Expert and HIS.

Competencies

Communication

Problem Solving

Team Collaboration

Agility

Critical Thinking

Decision Making

Innovation and Continuous Improvement

Open Communication

Ownership & accountability

Our Commitment

Mechanical Engineer 3 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

[[Lam India]] [[Etch Engineering India]] [[Etch Mechanical]]

The Impact You’ll Make

As a Mechanical Engineer at Lam, you design and define cutting-edge mechanical, thermo-mechanical and electro-mechanical systems. Your role involves feasibility studies, testing, and detailed design & development.

What You’ll Do

Owning & executing medium-complex Mechanical sub-system projects to design, develop, optimize, & implement design solutions in Lam Products. These projects would be driven as part of NPD, Continuous Improvement Programs (CIP), cost reduction and/or reliability improvement initiatives.
Collaborate with both internal and external Cross Functional Teams (CFT) to ensure the product design meets its objectives, validate the design through performance testing & obtain approvals by following Product Development & Release (PDR) process.
Develops & presents reports/presentations of excellent quality that communicate design intent, analysis & validation at design reviews.
Develops & execute test plans that generate characterization data sufficient to understand and validate the performance of the design.
Performs analytical work in order to characterize and properly specify designs, including heat transfer, stress, vibrations, fluid/gas dynamics and manufacturability. Design and develop thermo-mechanical components with understanding of fluid flow characteristics.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s in Mechanical Engineering with minimum 8 years of relevant experience. (or)
Master’s in Mechanical Engineering with minimum 4 years of relevant experience
Hands on experience to take design from concepts (OEM components, sheet metal, metal machined & weld assembly, plastics & ceramics would be a big plus), detail engineering (Tolerance analysis, dFMEA, 8D problem solving, RCCA, 5-why, DFMA), test plan, testing, etc. & through detailed drawing, parts procurement, DFM interaction with suppliers, assembly, build verification, customer qualification with deeper understanding of issues faced, lessons learned and closure.
Ability to identify all technical risks and mitigate them through appropriate calculations; structural, strength, seismic, tipping, flow, thermal & combinations of these including sub-zero temperatures. Demonstrated ability to conduct design reviews, seek approval in collaboration with stakeholders to implement design
Ability to work well in a matrix organization with aggressive deadlines, ability to align on priorities, etc. while focused to realize end objective (NX, drawings, GD&T, standards, change mgmt. process)

Preferred Qualifications

Excellent verbal and written communication skills; ability to present design concepts to peers and management in a professional and effective way
Knowledge and exposure to ANSI, ASME, SAE, ISO, SEMI standards applicable to semiconductor industry.

Our Commitment

Mechanical Component Engineer, Sr. (Bangalore, IN-Bangalore, IN)

Minimum Qualifications

Bachelor’s in Mechanical Engineering with minimum 4 to 8 years of experience in Mechanical/ Electromechanical, component engineering alternate parts component qualification, testing and evaluation.

The Group You’ll Be A Part Of

Component Engineering Group - CEG CoE

Job Responsibilities

Identify and perform Mechanical and Electromechanical alternate/replacement parts qualification, testing and validation
Initiate and lead efforts to identify and qualify second sources for material availability, performance, cost reduction and reliability improvement.
Perform Alternate component search and provide a detailed Component comparison report and should be a decision maker on component attributes.
Provide inputs on component selection to new designs to improve product reliability by participating in design reviews and DFMEA.
Work with cross-functional teams (mechanical design, procurement, and manufacturing) to ensure compatibility.
Maintain a standardized parts library to optimize reuse and minimize part proliferation.
Collaborate with vendors and procurement teams to evaluate component availability, lead times, and pricing.
Evaluate component obsolescence/single-source-components risks and recommend interchangeable replacements(Form, Fit, Function compatible) to avoid supply chain disruptions.
Own the completed component evaluation, guide team on component related specification issues in finding solutions.

Mandatory Skills

Understanding of detailed manufacturing process and end to end parameters of Mechanical/ Electromechanical components such as Fittings, Tube & hose Assemblies, Fasteners & Hardware’s, Pressure switch, Pressure gauge, Valves, Flow Switch, Hydraulic & Pneumatic components, Precision components etc.
Expert knowledge in Mechanical component parameters and their significant impact on product performance.
Review and interpret component data sheets and its significance on product performance.
Understanding GD&T (Geometric Dimensioning and Tolerancing) and how tolerances affect mechanical assemblies.
Dealing with uncertainty during testing of alternate/replacement components
Working closely with design engineers, procurement, quality, and manufacturing teams to optimize component usage for DFM (Design for Manufacturability) and DFA (Design for Assembly).
Creating BOMs (Bill of Materials), specifications, and qualification reports.
CAD Software Knowledge, Preferably NX and Creo.

Desirable Skills

Experience with PLM, Library management and Various Industry standards such SEMI,DIN,ISO and ASME.
Experience with documentation standards.
Knowledge of Pneumatic Schematic, schematic, and mechanical component evaluation.
Familiarity with manufacturing and Design environments
Knowledge of BOM Management tools like Silicon Expert and HIS.

Competencies

Communication

Problem Solving

Team Collaboration

Agility

Decision Making

Critical Thinking

Innovation and Continuous Improvement

Open Communication

Our Commitment

Product Change Analyst 2 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

The Impact You’ll Make

Implements and maintains an Engineering Change Notice System. These changes will include product improvements, repairs, and new product development. Coordinates the interaction between engineering, manufacturing, field operations, and marketing to ensure appropriate changes are documented.

What You’ll Do

Responsible for Engineering Change Orders review and approval.
Serves as the conduit with Engineering, Supply Chain, Planning to ensure Inventory and Demand Assessment reporting will be in place prior to Engineering Change Orders approval.
Responsible for evaluating material assessment to assure or minimize excess inventory prior to Engineering change submittal and analysis inventory financial impact (Rework Cost, Excess & Obsolete) and finalizing CO implementation Plan.
Coordinate with internal team of Change order creators and collaborate with the Eng. Change Program Managers, Product Manager, Supplier Business Managers, Supply Chain and Regional Planners to review E&O liability prior to Engineering Change Order submittal.
Coordinate with sub tier suppliers to update impacted sales orders based on Materials availability.
Assess material availability and inventory impacts for Engineering Changes in order to assist in establishing effectivity date(s)
Participates in change order strategy meeting as on need basis.

Who We’re Looking For

Bachelor’s degree in any discipline with 2 to 7 years of experience
Experience and Expert level knowledge in Engineering Change Mgmt. Process.
Experience in Cost Analysis on change orders wrt BoM Changes.
Good understanding of BoM (Bill of Material) structure including Config BOM.
Experience in working with MS Excel, MS Access & MS Word.
Detailed oriented, strong analytical skills, and ability to multi-task in a fast-paced environment.
Good communication skills (written & verbal) in English.

Preferred Qualifications

Good Problem-solving techniques.
Knowledge of SAP.
Knowledge of six sigma/problem solving methodologies.
Project/program management skills.

Our Commitment

Program Manager, Sr. Staff (Bangalore, IN-Bangalore, IN)

The Impact You’ll Make

As a Sr. Group Manager, Program Management at Lam, you will play a pivotal role in developing India Supply Chain ecosystem as part of a key strategic supply chain initiative for the organisation.

You’ll be at the forefront of project initiation through delivery, using your expertise to coordinate cross-functional teams and ensure project are completed on time and within budget.

What You’ll Do

Sr. Group Manager, Program Management manages the Strategic initiative of India Supply Chain ecosystem development through an effective Cross Functional engagement of Commodity Team, Product Group Engineering and other functions within Global Operations. As a Senior Staff of the Supply Chain Leadership team, the primary role is to create the strategic roadmap Year on Year and hold the teams accountable through effective progress check and meeting milestones defined as part of the strategic program. Accountable for establishing visible impact of meeting the objectives around Supplier Selection, Qualification of parts in time and meeting the supply chain performance metrics such as cost, quality, capacity, and on-time delivery requirements of Lam Research products.

Program Management across all the commodities identified for the India Sourcing program.
Program review updates to Senior Executive leadership to identify and mobilize the support required.
Acts as a point of contact for all escalations from Product group to Supply Chain, liaison between Engineering Product management and Supply Chain functional organization
Provide actionable insights for management to influence decision making through data collection and analysis.
Develop and deliver clear and concise communications for leadership teams and stakeholders.
Ensure execution, manage risks, assure adherence to program or project schedules, and performance to meet business requirements.
Works in a cross-functional team environment within a matrix organization with internal customers, including high-level executives, to regularly monitor the progress.
Define and monitor metrics in line with AOP (annual operating plan) objectives relative to supplier performance against these expectations to ensure continuous supplier improvement; then drives team to address and close gaps to meet objectives
This role will also require flawless delivery of activities resulting in the highest level of product and service quality as viewed through the eyes of Lam’s customers.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Supply Chain, Operations Management, Business, Engineering, or related field with 15+ years of experience; or Master’s degree with 14+ years’ experience; or equivalent experience.
12+ years of related experience in project management or program management
Experience leading cross-functional teams and influencing stakeholders.
Advanced analytical skills to interpret and utilize data for decision support.

Proven ability to gain partnerships and in a cross-functional environment with Sourcing, Engineering, manufacturing, quality as well as procurement, finance, and product support.
Prior experience in managing multi-disciplinary teams of Supply Chain Sourcing and other process
Knowledge of manufacturing methods and supply chain knowledge in commodity sourcing
Additional required skills include leadership skills, strategic thinking, attention to detail for everyday tactical execution, and excellent people management
Demonstrated skill in decision making and problem solving and experience in making business judgments
Demonstrated experience in strategic planning – setting vision and objectives, creating strategies, forecasting, and budgeting
Demonstrated experience in talent and organization development
Proficient in Data Analytics & Presentation Skills
Familiar with and uses Quality Principles such as Lean, Six-Sigma, etc

Preferred Qualifications

Program Management / Commodity Management / Supply Chain Leadership in large manufacturing operations groups for MNC product-based company.
Familiarity with semiconductor, Electrical equipment Manufacturing or high-technology supply management practices, standards, and organizations.
Experience in Global Sourcing / Localization

Our Commitment

Mgr, Configuration Engineering (Yokohama, JP-Yokohama, JP)

The Group You’ll Be A Part Of

The Impact You’ll Make

Directs the activities of a staff that develops, analyzes and maintains tools that support and automate processes for hardware or software product release. Develops standards, processes and controls for configuration and release activities. Provides guidance to developers and configuration/release team in the preparation of build analyses, design alternatives, installation scripts and programs, schedules and evaluations. Selects, develops and evaluates personnel to ensure the efficient operation of the function.

What You’ll Do

•   Determining tool configurations for Lam tools (CVD, Etch or Clean)
•   Aligning customer requirements with the configurations of the shipped Lam tool
•   Creating equipment specifications and design documents
•   Selecting local procured items, planning budgets, purchasing, and managing budgets
•   Managing tool move-in and equipment connection tasks
• Travel ratio: typically 0~5%

Who We’re Looking For

1) Individuals with Job Grade 28-30 (other Job Grades can be considered upon consultation)
2) Over 2 years of experience in the current role
3) Management and project management skills are a plus
4) Ability to actively communicate domestically and internationally without barriers such as department or age
5) Possess teamwork that respects each other
6) Able to take proactive actions

Preferred Qualifications

1) Bachelor's degree or higher (Science and Engineering)
2) Experience in mechanical or electrical work
3) Management and project management skills are a plus
4) Ability to understand and implement the company's management policies, etc.
5) Knowledge of Lam equipment is a plus
6) Ability to actively communicate domestically (both within and outside the company) and internationally without barriers such as department or age
7) Business-level English proficiency (reading, writing, speaking)
8) Business-level Japanese proficiency (reading, writing, speaking)
9) Possess teamwork that respects each other
10) Able to take proactive actions
11) Experience in handling inquiries, negotiations, procedures, and acceptance of deliveries with clients is a plus

Our Commitment

Technical Support Engineer (Yokohama, JP-Yokohama, JP)

The Group You’ll Be A Part Of

The Impact You’ll Make

The candidate will be part of the Lam CSBG, as an IT engineer of the Fab Integrated Technology Services (FITS) team, responsible for global and regional fab IT and Security technology delivery, deployment and operation. The FITS team is a group of talented IT professionals with diverse skillsets & experiences, lending to many learning opportunities from working cross functional with other Lam departments (Product, Customer Services, Operation etc.), and will be interfacing with Lam customers at fab sites. The IT engineer is responsible for providing technical assistance and guidance to deploy and support Lam Advance Services products infrastructure at Lam customer Fabs or Lam regional offices, from early in product development to high volume deployment. The IT engineer will be the technical liaison between Lam stakeholders (account team, engineering, productivity, product management) and customer IT teams as needed.

Essential technical skills and experiences

Worked with Linux specifically CentOS and Ubuntu
Understand fundamental DNS and networking technologies/concepts/technical steps
Understanding of PowerShell and basic scripting skills
Experience working within a virtual environment
Advanced knowledge of Windows OS
Understanding of Antimalware/Antivirus software and operation
Analytical, technical investigation and troubleshooting skills

Preferred working experiences

Worked in a Fab environment or familiar with Semiconductor industry
Some hands on experience with Cisco switches
Understand and have effectively administered systems with PowerShell
Extensive experience working with Hyper-V
Troubleshoot CentOS and the ability to provide solutions
Administered Antimalware/Antivirus systems

Soft skills

Strong verbal and written communication skills for collaborating with global teams and customers
Functional verbal and written Japanese and English, addition verbal foreign languages would be a major advantage
Self-driven, resourceful when dealing with challenges
Quick learner and ability to pick up new technical skills as needed
Able to work independently and remotely with minimal face to face supervision
Excellent track record in working with customers for customer satisfaction
Demonstrate teamwork in working with global team and/or different customer teams

Travel

This position is expecting about 25% travel regional or International

Our Commitment

What You’ll Do

Senior Regional IT Engineer (Yokohama, JP-Yokohama, JP)

The Impact You’ll Make

Join Lam as an IT Engineer, where you'll be at the forefront of designing, analyzing, and implementing applications and systems that form the foundation of our infrastructure. As a crucial member of our IT team, you'll contribute your technical assistance and guidance to projects for various systems and infrastructures. Acting as a technical liaison, you'll address complex business problems with automated systems solutions. Your expertise will be instrumental in driving Lam's commitment to innovation and efficiency.

What You’ll Do

Remote Site Support: Provide comprehensive IT support to remote sites, addressing hardware and software issues, troubleshooting problems, and ensuring timely resolution. Implement and manage help desk operations to ensure efficient handling of user requests from remote locations.
International Team Collaboration: Collaborate with international teams to support and maintain IT infrastructure across the region. Participate in global IT projects and initiatives, ensuring consistent implementation and adherence to standards.
Infrastructure Management: Work with international support team/SMEs to oversee the installation, configuration, and maintenance of IT infrastructure, including servers, networks, and storage systems. Ensure the infrastructure is robust, scalable, and secure to meet the organization's needs.
End user support: Tier 2 deskside support for users in Japan. Able to support Tier 1 DSS engineer to resolve complex end user issue.
Vendor Coordination: Collaborate with vendors to procure IT equipment and services, ensuring cost-effective solutions and timely delivery. Manage vendor relationships and contracts.
Documentation: Maintain comprehensive documentation of IT systems, configurations, procedures, and user guides. Ensure documentation is up-to-date and accessible to relevant stakeholders.
Training and Development: Provide training and support to end-users to enhance their understanding and utilization of IT systems. Conduct workshops and training sessions as needed.
Communication: Provide in time updates to users and management team in Japan, for changes in IT area. Meanwhile being able to actively collect feedback from users in Japan and provide it to international teams.

Who We’re Looking For

Language: Business level Japanese and English
Education: Minimum B.S. in Information Technology or equivalent.
Experience: Minimum of 3-5 years of experience in IT infrastructure management, network administration, and end-user support.
Skills: Thorough knowledge of information technology, computer systems, applications, and networking. Knowledge in Microsoft products, such as Office 365, AD, Intune, Windows Defender, Windows servers are required. Understanding of ITIL framework is a plus. PM skill is a plus. Knowledge in Information Security is a plus.
Communication: Excellent communication, interpersonal, organizational, and coordination skills.
Problem-Solving: Strong analytical and problem-solving skills to address complex IT issues and implement effective solutions.
Independence: Ability to work independently and manage IT operations without direct supervision.

Our Commitment

Field Service Engineer 2 (Pyeongtaek, KR-Pyeongtaek-01, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Field Service Engineer 2 (Pyeongtaek, KR-Pyeongtaek-01, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Business Development Analyst 4 (Yongin, KR-Yongin-02, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

This position is responsible for developing the business strategy of Etch/ Deposition services to explore opportunities and create it thru designing tailored products. In addition, need to focus on SAM expansion of productivity services such as Comprehensive, EI-DA and WCO with Dextro.

What You’ll Do

Have a projection of Service SAM/SOM(Available and Sellable Market) through monitoring customer investment, tools utilization, customer’s behavior changes in tools maintenance and competitors’ activity
Conduct the market analysis (customer requirements, competitor status)
Establish the business strategy to penetrate new business by designing tailored products and achieve profitable business outcome
Align business strategy for service business expansion with Fremont CSBG & account teams closely and timely

Business Impact

(e.g. strategic focus, decision-making authority)

Explore customer’s challenges about fab operation and assess required improvement area
Develop new product/program and/or business strategy as SPS to resolve customer’s challenges and achieve business goal
Co-work with Sales to manage key service P&Ds & quantify customer’s value based on performance
Execute the strategy and align target pricing for profitable business growth

Financial Management

(e.g. financial/ budgetary responsibilities, Impact on revenue/expenses)

SAM (Available Market) projection
CSBG funding forecast & management to engage new service business for penetration
Forecast Service HC and manage Service P&L by Revenue/margin change analysis compared to last QxR

People engagement

(e.g. interface with relevant department and customers)

Closely work with account Field/Productivity teams, ROM, Fremont CSBG & Finance
Communicate with customers to promote value and ROI of our service products

Who We’re Looking For

Bachelor’s degree in engineering, business administration, or related field
Minimum 7 years experience in Semiconductor industry background
Understand customer’s fab operations
Possess analytical thinking & skills: Excel, PP, SAP (ERP), statistical analysis
Excellent communication skills in English and Korean
Operations Knowledge and global perspectives to support global accounts
Logical & Strategic thinking
Quantify customer’s value$ and ROI

Preferred Qualifications

Marketing or equipment company career
Experience of Etch or Deposition systems

Our Commitment

Facilities Support 2 (Yongin, KR-Yongin-03, KR)

The Group You’ll Be A Part Of

Global Workplace Solutions is responsible for delivering creative, market-competitive workplace solutions that are aligned with Lam Research business needs through proactive occupancy plans; secure safe and productive work environments; and scalable, high-quality facilities and emergency services.

The Impact You’ll Make

Assists with maintaining daily operations of the physical facility. Supports maintenance mechanics and facilities staff by performing “handyman” maintenance duties such as furniture moves, simple electrical projects, spot painting and/or cleaning, light construction and/or exterior cleanup. Works with outside contractors on building and equipment repairs. Operates site equipment as needed, using hand and power tools as necessary. May perform other activities such as audio-visual (AV) set up for meetings or conferences, inter-office mail deliveries, waste paper recycling, and stocking of employee break areas. May maintain documentation such as power diagrams, network diagram, space usage, etc. and also assist with the editing of media materials, such as tapes. May provide support to vendors/contractors such as security force, cafeteria, media relations. May assist in hosting corporate visitors/dignitaries.

What You’ll Do

The Facilities technician will work with facilities engineers to maintain facilities infrastructure and equipment to make sure a safety of the facilities.
Provide support for facilities maintenance activities of buildings and equipment.
Responsible for overall site vacuum pumps, abatement maintenance and owns equipment uptime metrics associated with it as it affects process tool downtime.
Requires ability to analyze and evaluate complex and ambiguous problems with focus on speed to solutions.
Responsible for maintenance, operating, and monitoring on abatement capacity and nitrogen dilution operational settings.
Work with onsite Engineering and Operations staff to support all aspects of Research and Development Cleanroom and Lab Operations.
Assisting as required with all aspects of Global Workplace Solutions.

Who We’re Looking For

Associated degrees such as mechanical engineering and relevant industry experience are required under 2 years of industrial experience.
Basic knowledge of vacuum pumps, abatement fundamentals, and chiller thermodynamics in the semiconductor industry required.
The certification requirement is the Air-conditioning refrigeration machinery industry engineer.
Basic P&ID drawing should be able to be read and understood. Working knowledge of CAD as plus.
Strong organizational and communication skills, and ability to successfully interact with internal customers and stakeholders.
Microsoft Teams, Outlook and Excel. Working Knowledge of SAP a plus.
People who are available 3 shifts rotation.

Preferred Qualifications

- Fluent in English (written & verbal) and Presentation skill

Our Commitment

Facilities Engineer 5 (Yongin, KR-Yongin-03, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Facilities Engineer at Lam, with your project management expertise, you’ll plan and oversee facility changes for plant, tool installations, and production equipment layouts. You'll work with architects to develop design criteria, layouts, and prepare contracts. You inspect construction and installation progress to ensure adherence with established specifications and schedules. Your focus on performance specifications required to meet unique operating conditions contributes to the efficiency and compliance of Lam's state of the art facilities.

What You’ll Do

Design, develop, modify Electrical hardware systems
Selects OEM components and materials for power distribution box/control panel design
Creates and releases engineering drawings & bill of materials using engineering change management process
Creates electrical schematics and system based on requirements
Conducts and drives design review for new concepts
Assists with development, and refinement of functional specifications for electrical systems and power distribution
Works with multidisciplinary engineering design teams to design and modify custom and OEM system components
Manage and cooperate with OSP
Provide electrical engineering design review input and approval for facility infrastructure and process tool installation projects
Provide electrical engineering construction input and commissioning support for facility infrastructure projects
Review short circuit coordination and arc flash studies and provide input to improve system coordination and reliability
Support as-build documentation of electrical system and single line diagrams
Maintain load/capacity reports for facility infrastructure systems and forecast load growth
Drive improvement of electrical infrastructure to increase system reliability and up time
Experience with standard operating procedure creation and training skills
Experience with energy efficiency improvement projects
Work directly with contractors and service providers to ensure delivery of operational results
Perform Failure Mode and Effect Analysis during project design development phase
Capital and expensed project financial management and control experience

Who We’re Looking For

Bachelor's degree (or equivalent) in electrical engineering or similar and a minimum of +15 years of related experience
Good oral and written communication skills in English
Highly proficient in power panel electrical circuit design with safety interlocks & 3 phase load analysis
Good working knowledge in PCB/ Low voltage circuit design for power and control applications
Expert in application of power and controls technologies for systems automation
Understanding of AC/DC Power distribution systems required
Experience working with insurance provider (FM Global) to ensure reliable facility operation
Familiarity using power modeling software such as ETAP, SKM, EasyPower
Strong working knowledge of NFPA 70/NEC code requirements and NFPA 70E electrical safety requirements
Experience creating equipment maintenance programs to align with NFPA 70B and NETA requirements

Preferred Qualifications

Excellent people skills with demonstrated ability to work effectively and efficiently with diverse teams, customers, internal and external partners.1
Prior experience with MS office tools (ppt, excel, project)
Previous experience leading technical projects
Strong project management, communication, analytical, and problem-solving skill
Effectively read, write, and communicate with others in English
Comfortable with travelling
Experience with capital equipment, Electrical control/Power box or similar (for e.g., process industries, aircraft, etc.) industry in a sub-system / module design project
Experience in selection of components, setting up equipment for experimentation / testing in laboratory environment, setting up safe practices
Experience of power distribution and/or control system design of complex systems
The certification requirement is for Electrical License

Our Commitment

EHS Engineer - Site health officer (Yongin, KR-Yongin-03, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

This role in the Environmental Health & Safety (EHS) team is responsible for complying applicable local regulation and implementing the occupational health programs at the Lam Research, Korea Technology Center research and development (R&D) facility. This position provides strong technical support for the occupational health & hygiene programs including: General/pre/post assignment medical surveillance & consultation, Ergonomic evaluation, workplace exposure monitoring, chemical safety, first aid response, occupational health related trainings, standard/guideline/program development, Respiratory fit test/medical clearance, etc.

What You’ll Do

This position will be assigned as a site health officer (사업장 보건관리자) based on Korea regulatory requirement and the person should be competent to implement the requirements.
Site health program management development and implementation following local & Lam requirement including respiratory protection program, heat stress Management, confined space Management program, hearing conservation program, fit for duty or other occupational health or industrial hygiene related.
Manage and develop site occupational health examination program (Pre-post, After-post, Annual, General)
Manage and develop site workplace exposure monitoring program
Manage and develop site industrial/office ergonomic evaluation program
Monitoring and following up occupation health & industrial hygiene related requirements based on local regulatory, corporate or internation best practices.
Site MSDS (Material Safety Data Sheet) Management and training
Develop gas and chemical exposure medical treatment/first aid protocol
Occupational health & first aid training (CPR & AED training or health related)
Initiate and drive health promotion programs (ex, non-smoking, ergonomic, or other health & wellness related)
Health clinic room operation & Management including medical supply, first aid, treatment, stretching and health condition counseling for employees
Medical emergency response for an injured employee and providing a guidance for additional treatment or outside medical center
Case Management for injured employee including return to work evaluation
Establishment and operation of nationally designated infectious disease response Management system (ex. COVID-19)

Who We’re Looking For

Nurse certification and industrial hygiene engineer certification who are eligible to be designated as a Health officer under the Korea Occupational Safety & Health Act.
Bachelor’s degree or above in occupation health, industrial hygiene or another related field.
About total 4-9 years relevant work experience in both nurse and/or a site health officer at hospital, company or health consulting agency.
Intermediate or above English speaking and writing ability.
Working knowledge of Korean occupation health & hygiene regulations and global best practices.
Self-starter with critical thinking, self-guide and educate skills. Strong problem solving and decision-making skills based on priorities with having proper sense of urgency.
Team player with strong interpersonal skill, capable of working within cross-functional, multitask and external team. Good communication skills
Experience in a fast paced, changing/growing organization.
Must be comfortable working in laboratory, clean room, process facility and construction environments.
Proficiency at MS office

Preferred Qualifications

Another EHS related professional certifications such as occupational safety engineer, air emission, wastewater, dangerous goods, high-pressure gas, electrical safety, fire safety, radiation etc. are plus.

Our Commitment

Laboratory Service Engineer 3 (Yongin, KR-Yongin-03, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Laboratory Service Engineer at Lam, you're a pivotal force in maintaining and upgrading CVD/ALD/Plasma enhanced deposition equipment in our applications lab. It’s not the typical lab; you’ll be hands-on with state-of-the-art equipment performing maintenance, troubleshooting, and calibration. You'll support innovative equipment providing installation and documentation, making you an integral part of our technology’s success.

In this role, you will contribute to concept and feasibility hardware to enhance current and develop next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required Personal Protective Equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in a technical field with 3 years - 7 years of experience.

Preferred Qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our Commitment

Etch Product Engineer for KTC R&D Center (Yongin, KR-Yongin-03, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to KTC Product development.

What You’ll Do

Collaboratively engineer innovative semiconductor equipment and Etch process design solutions to quickly resolve customer issues and improve product quality in a dynamic fast-paced challenging environment.
Supports Etch product development from product prototyping, development, deployment/product release, and initial field support.
Design and conduct experiments, tests, and prototypes to resolve complex technical problems.
Present analysis and support technical recommendations clearly and concisely.
Collaborate with cross-functional and cross-cultural teams to guide the specification and development of products.
Provides technical support for installation and/or diagnosing, troubleshooting, repairing, and debugging complex product issues.
Maintain a high degree of customer engagement including face-to-face and international travel to customer sites supporting near term product releases and solve customer issues.
Work in a cleanroom lab and/or customer semiconductor fab environment.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Material Science, Electrical Engineering, Mechanical Engineering, Optics, Physics, Chemistry, Chemical Engineering, or related field with 6+ years of experience; or a PhD with 3+ years’ experience; or equivalent experience.
Exceptional analytical and experimental design skills.
Creative thinking, problem solving, and troubleshooting capabilities.
Exceptional clear communication and presentation skills.
Comfortable traveling up to 25% of the time.

Preferred Qualifications

Prior product design and technical engineer experience is beneficial.
Experience designing, specifying, building, operating, and maintaining semiconductor, automotive, aerospace, or related hardware, tools, and equipment.
Experience coordinating and communicating with cross-functional teams.

Our Commitment

Field Process Engineer 4 (Icheon, KR-Icheon-01, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide process support, installation, resolve and improve process/system/productivity, and develop processes of new applications of Lam equipment at customer sites.
Serve as key field support for Beta sites, evaluations, or first-in-fab installations.
Design and conduct experiments, collect data, analyze results, generate reports, and provide recommendations to optimize device architecture and process modules.
Partner with customers to meet requirements for new technology process, to support existing processes, and to address process deviations through root cause analysis.
Develop new or modified processes, define best known method process recipes, and partner with the hardware engineering to define chamber requirements and characterize hardware designs to meet customer performance requirements.
Collaborates with cross-functional teams and customers to understand their needs, technology roadmaps, process flow, requirements, and business challenges.
Represent Lam to our valued customers and deliver exceptional customer satisfaction.
Present technical and marketing materials with a win-win mindset to keep customers informed about products and services to address their needs.
Provides technical leadership, support, and instruction for Field Service Engineers, Technicians, sub-contractors, and customers on installs, repairs, operations, and coordinates application of new procedures.
Collaborate with Field Service Engineers on complex problems impacting process output.
Coordinates statistical analysis of failure rates and develops continuous improvement plan (CIP).
Recommends design changes to key technical solutions, and process development, and monitors performance trends.

Who We’re Looking For

Minimum Qualifications:

PhD in Electronics, Chemistry, Physics, Material Science, or related field; or Masters of Science with 3+ years of relevant work experience; or Bachelors of Science with 6+ years of work experience.
Proficiency in computer applications, including data analysis tools, word processing, spreadsheet, and presentation software.
Excellent communication, written and verbal, and customer relationship skills.
Ability to work in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit, and on-call if needed.

Preferred Qualifications

In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Effective organizational skills and ability to manage multiple tasks simultaneously, reacting to shifting priorities, and meeting business needs and deadlines.
Excellent interpersonal skills with the ability to work effectively with diverse teams, customers, and partners.
Collaborative mindset in matrixed environment.

Our Commitment

Tax Analyst 2 (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

Overview:

Lam Research Corporation ("Lam"), a Fortune 500 leader in the semiconductor industry is seeking a tax professional to join its Malaysia tax team to support Lam's indirect tax function and digital transformation initiative.

As a Tax Analyst, you will play a crucial role in the tax function to support indirect tax operations and new processes implemented as part of Lam’s digital transformation journey.

As part of the Tax team and the enterprise-wide Digital Transformation program at Lam, the Tax Analyst focuses on indirect tax operations and new processes and tax technologies implemented to create transformative capabilities for Lam’s Global Tax Team. Lam is investing considerably in our future to ensure our continued success and support our future growth as the semiconductor industry continues to grow and approaches $1T.

The position will report directly to the Indirect Tax Director.

What You’ll Do

Assist the Tax Team in testing and implementing Indirect Global Tax Technology (Vertex O) and S/4 Hana as part of Lam’s Digital Transformation Initiative
Support the Tax and Digital Transformation Teams in deploying SAP DRC to comply with Malaysian e-Invoicing mandates
Develop tax reporting processes to facilitate indirect tax reporting from two ERP systems during Lam’s transition from ECC to S/4 Hana
Support the Tax Team in designing and implementing new processes to ensure data accuracy and completeness as Lam transitions from SAP ECC to SAP S/4 HANA
Assist in preparing monthly U.S. state sales/use tax compliance deliverables
Respond to vendor and customer tax inquiries.

Who We’re Looking For

Bachelor's degree in accounting required; MS Taxation and/or CPA preferred
SAP ECC, SAP S/4 HANA, SAP DRC (Document Reporting & Compliance) module, Vertex Q and Vertex O experience preferred
Proficiency in Microsoft Excel, Word & PowerPoint
Experience with software applications such as Alteryx and Power BI are a plus
Strong organizational skills to manage deliverables and deadlines effectively
High ethical standards and desire to work effectively within a team environment
Exceptional interpersonal skills to effectively communicate with internal and external business partners

Our Commitment

Product Engineer 4 (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

At Lam, as a Product Engineer, you thrive in high-stakes, dynamic environment, driving product and supplier development at the forefront of the semiconductor equipment industry. Collaborating closely with suppliers and internal teams, you will provide real-time problem-solving to supplier challenges and to enhance our products. Your passion for engaging with suppliers and innovative engineering drives progress in our industry, tackling the once unsolvable.

In this role, you will directly contribute to Supplier Engineering Technology.

What You’ll Do

This position is needed to support frame, sheetmetal and complex value added assembly
Supports product development from product prototyping, development, deployment/product release, and initial supplier support.
Present analysis and support technical recommendations clearly and concisely.
Collaborate with cross-functional and cross-cultural teams to guide the development of suppliers, manufacturing of products, resolve manufacturing issues, and improve supplier quality.
On-site support of suppliers to qualify manufacturing processes, audit supplier quality systems. Ensure ERP and MES systems are robust and have effective control of manufacturing processes.
Maintain a high degree of supplier face to face engagement and international travel to supplier sites to resolve product and supplier issues.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Material Science, Electrical Engineering, Mechanical Engineering, Optics, Physics, Chemistry, Chemical Engineering, or related field with 10+ years of experience.
Experience in quality management, auditing, 8D methodology, continuous improvement, 6S.
Experience in supplier qualification and development
Experience in various manufacturing processes needed to fabricate parts/assemblies in various environments, such as cleanrooms.
Creative thinking, problem solving, and troubleshooting capabilities.
Exceptional clear communication and presentation skills.
Comfortable traveling up to 25% of the time.

Preferred Qualifications

Prior supplier quality management experience is beneficial.
Experience designing, specifying, building, operating, and maintaining semiconductor, automotive, aerospace, or related hardware, tools, and equipment.
Experience coordinating and communicating with cross-functional teams.

Our Commitment

Financial Analyst 3 (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

At Lam, as a Financial Analyst, you will be a trusted advisor to the business and influence sound business decisions based on your expertise in interpreting data, performing analysis, modeling, and understanding financial outlook. You’re in a high visibility role working with internal business partners at all levels and across functions, on challenging and rewarding projects that help shape Lam's financial strategies and decisions for the future.

What You’ll Do

Perform financial forecasting, consolidation, reporting, and operational metrics tracking in support of financial cycles: Quarterly Reviews, Annual Operating Planning (AOP), and Balance Sheet Review (BSR).
Manage quarter-end close processes including variance analysis and actuals vs. forecast reporting of inventory, headcount, Opex, Capex.
Perform financial analysis to influence decisions and support corporate initiatives.
Prepare and publish reports creating visibility to spending trends and headcount to make spending prioritization recommendations.
Partner with Business Operations to identify and support or drive profitability initiatives and projects.
Identify and lead business process improvement initiatives to improve operational efficiency.
Build trusted business relationships, gain deep understanding of the business, and act as an advisor providing actionable insights from growth opportunities to cost savings.
Support internal and external audits, as well as controls and compliance related activities.

Who We’re Looking For

Bachelor’s degree in Finance, Accounting, or business-related field with 5+ years of experience; or Master’s degree or equivalent certification (MBA, CPA, CFA, CA, CMA, or equivalent) with 3+ years’ experience; or equivalent experience.
Advanced knowledge of Microsoft Excel, dashboards, and data visualization.
Attention to details and demonstrated critical thinking and problem-solving skills.
Excellent interpersonal skills with ability to develop and maintain business partner relationships at all levels of the organization.
Ability to manage tight deadlines, prioritize workload; effective multi-tasking skills are vital.
Excellent communication and presentation skills, written and verbal.

Preferred Qualifications

Foundational understanding of US GAAP and India GAAP is a plus.
Prior experience within technology, manufacturing, or related industries.
Advanced analytical, financial modeling, and reporting skills.
SAP and Business Objects experience is highly desirable or demonstrable strong systems skills.
Experience in business intelligence (BI) technologies, tools, and concepts.
Ability to collaborate with diverse, cross-functional, and international teams including occasional flexible schedules to accommodate time zones.

Our Commitment

Business Function Intern 1 (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

What You’ll Do

Development of key metric dashboard and business process improvement projects
Required to work with cross functional team to identify challenges and opportunities to improve current business processes and reports
Assist to prepare materials and data for business case study

Who We’re Looking For

Education requirements, any related discipline in Business/ ScienceProficiency in Microsoft Excel, Words and PowerPoint
Proficiency in VBA/PowerBI/SQL is a plus
Able to communicate well in English

Our Commitment

Product Cost Engineer (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

Join Lam as a Manufacturing Engineer where you’ll play a crucial role in supporting the new product pilot production factory, virtual manufacturing, or high-volume manufacturing production factory. Using your knowledge of technology and engineering principles you will oversee the planning, development, and maintenance of manufacturing methods, processes, and operations. You'll tackle technical, quality, and production challenges. Your expertise optimizing manufacturing costs and standards helps shape Lam's commitment to innovation and efficiency in manufacturing.

What You’ll Do

Troubleshoot new or existing product problems, involving designs, materials, or processes.
Designs, develops, and implements safe and cost-effective complex equipment and methods of assembly for all phases of manufacturing.
Define process and methods for high volume manufacturing which includes operations method sheet, routing, and sequencing.
Perform virtual build and create sequence of assembly.
Perform root cause investigation and recommend corrective action for operational problems, such as material use variances, bottlenecks, fixture issues during build or manufacturing process.
Identify opportunities to improve manufacturing processes or resolve problems and follow through resolution to reduce costs, improve product quality, and cycle time.
Reviews and develops designs that improve product manufacturability and assembly.
Coordinate new product builds in pilot production manufacturing partnering closely with manufacturing and product engineers.
Create and release engineering drawings & bill of materials (BOM) using Engineering Change Management process.
Development of handoff package to allow product transition to high volume manufacturing.

Who We’re Looking For

Bachelor’s degree in Mechanical Engineering, Production Engineering, Industrial Engineering, or related field with 5+ years of experience; or Master’s degree with 3+ years’ experience; or equivalent experience.
Skilled troubleshooting capabilities in the areas of electro/mechanical assemblies.
Solid understanding of manufacturing processes.
Proficient in Design for Manufacturing and Assembly (DFMA) with approach to structured problem-solving and decision-making.
Proficient in software applications such as CAD modeling, Product Lifecycle Management (PLM), or Product Data Modeling (PDM) systems.
Experience in Engineering Change Management Process.
Working knowledge in Operation Method Sheets (OMS), process planning, and Bill of Materials (BOM) Management.

Preferred Qualifications

Knowledge of Semiconductor equipment, Capital Equipment industry and its manufacturing processes.
Effective communication and presentation skills, both written and verbal, in English.
Statistical analysis skills including statistical process control and data analysis used in production setting.
Knowledge in Design Failure Mode and Effect Analysis (DFMEA).
Proven stakeholder management skills, with ability to influence both internal and external stakeholders or customers in technical matters.

Our Commitment

Senior Transfer Pricing Analyst (Batu Kawan, Penang, MY)

Overview:

Lam Research Corporation (“Lam”), a Fortune 500 company in semiconductor industry, has an immediate opening for a Senior Transfer Pricing Analyst in Penang, Malaysia.

The Senior Transfer Pricing Analyst will assist with various aspects of the company’s transfer pricing planning, compliance, and controversy processes.

Specific Duties and Responsibilities:

Prepare/review quarterly and annual worldwide transfer pricing computations
Review quarterly legal entity profit forecast with respect to the cross-border transactions
Prepare/review all transfer pricing documentation such as master file, local file, CbCR, and all other relevant disclosures and statements
Assist with Advance Pricing Agreement (“APA”) applications with different tax authorities
Assist with identification of uncertain income tax positions for transfer pricing areas on a global basis
Prepare/manage intercompany transfer pricing agreements and keep track of all intercompany transactions
Provide support on complex transfer pricing matters related to global transactions and assist business and regional tax teams with planning and compliance
Assist in defending global transfer pricing policies across jurisdictions in the face of increasing scrutiny from tax authorities around the world
Explore transfer pricing computation/documentation automation opportunities and assist with system automation initiatives

Qualifications:

Bachelor's Degree in Accounting or the equivalent
Additional professional qualifications, e.g. CTIM, ACCA, MIA will be an advantage
Minimum 3 years transfer pricing or tax experience in public accounting or industry, preferably with a large accounting firm or a large corporate tax department
United States tax experience and knowledge will be an advantage
Strong organizational and coordination skills and attention to detail
Strong communication skills in English - both oral and written
Strong proficiency in tax research tools
Experience with SAP system is a plus
Strong technology and computer skills

Our Commitment

Program Lead Costing Engineer (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Troubleshoot new or existing product problems, involving designs, materials, or processes.
Designs, develops, and implements safe and cost-effective complex equipment and methods of assembly for all phases of manufacturing.
Define process and methods for high volume manufacturing which includes operations method sheet, routing, and sequencing.
Perform virtual build and create sequence of assembly.
Perform root cause investigation and recommend corrective action for operational problems, such as material use variances, bottlenecks, fixture issues during build or manufacturing process.
Identify opportunities to improve manufacturing processes or resolve problems and follow through resolution to reduce costs, improve product quality, and cycle time.
Reviews and develops designs that improve product manufacturability and assembly.
Coordinate new product builds in pilot production manufacturing partnering closely with manufacturing and product engineers.
Create and release engineering drawings & bill of materials (BOM) using Engineering Change Management process.
Development of handoff package to allow product transition to high volume manufacturing.

Who We’re Looking For

Bachelor’s degree in Mechanical Engineering, Production Engineering, Industrial Engineering, or related field with 8+ years of experience; or Master’s degree with 6+ years’ experience; or equivalent experience.
Skilled troubleshooting capabilities in the areas of electro/mechanical assemblies.
Solid understanding of manufacturing processes.
Proficient in Design for Manufacturing and Assembly (DFMA) with approach to structured problem-solving and decision-making.
Proficient in software applications such as CAD modeling, Product Lifecycle Management (PLM), or Product Data Modeling (PDM) systems.
Experience in Engineering Change Management Process.
Working knowledge in Operation Method Sheets (OMS), process planning, and Bill of Materials (BOM) Management.

Preferred Qualifications

Knowledge of Semiconductor equipment, Capital Equipment industry and its manufacturing processes.
Effective communication and presentation skills, both written and verbal, in English.
Statistical analysis skills including statistical process control and data analysis used in production setting.
Knowledge in Design Failure Mode and Effect Analysis (DFMEA).
Proven stakeholder management skills, with ability to influence both internal and external stakeholders or customers in technical matters.

Our Commitment

Engineering Intern 1 (Batu Kawan, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Engineering Intern Duties and Responsibilities

Learn the responsibilities of an engineer
Assist Test Engineers on day-to-day task and projects
Fulfill administrative duties at workplace
Incorporate academic knowledge into hands-on work

Who We’re Looking For

Bachelor Degree in Computer Science or Electrical-Electronics Engineering
Able to read, write and verbal communication skills in English
Strong in programming languages & system creations
Use computer-based data systems, applications, and Office software (e.g. Microsoft Excel, Word, Outlook, Teams)
Type of work: cleanroom environment, phython programming, system creation

Our Commitment

Business Systems Analyst 6 (Batu Kawan, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

The Office of Digital Transformation at Lam Research is responsible for the creation of next generation business process and accelerated adoption of technology across the company. The Digital Transformation, Senior BSA for Knowledge Management is a unique opportunity to transform a market leading semiconductor company to scale for past and future growth at an unprecedented time in our industry.

What You’ll Do

Lead the design and development of a knowledge strategy & framework aligned with the Digital Transformation principles & business strategy
Transform the way Lam uses digital tools and systems to better enable our operations, giving our employees & customers better tools and data for maximum efficiency
Work as a partner to lead transformation projects and collaborate with cross functional /technical team, business teams and external suppliers/vendors as needed
Drive implementation of new systems with internal and external teams, define strategy of existing systems and effectively communicate gaps.
Responsible for capturing and ensuring functional changes are captured as per Lam standards and quality of deliverables.
Responsible for capturing business process, requirements, solution designs and supporting UAT as required
Other Job Responsibilities:
Re-imagine processes and protocols for storing information, making it accessible, controlling access and capturing new knowledge
Identify & recommend best in breed Knowledge Management tools to harness cross-functional data making it easily accessible & usable
Advocate for KM and the use of standard approaches across teams, functions, locations, and/or business units
Collaborate with cross-functional teams to ensure enterprise technology reflects knowledge flow processes and KM activities are integrated into digital platforms
Support Platform and vendor selection to increase customer value through better outcomes
Develop business case, Conduct research, data analysis, and provide data to support solution recommendations

Who We’re Looking For

Minimum Qualifications:

Bachelor’s Degree in Business, Computer Science or related field. MBA or master’s preferred
15+ years’ experience implementing and supporting enterprise applications as technology partner for business
8+ years proven experience in Knowledge Management, strong knowledge of systems and tools, and improvement initiatives including experience in process digitalization and digital transformation in leading/fast growth companies
Experience implementing global knowledge management strategies processes, and platforms for complex, high growth companies specially manufacturing to support business transformation
Experience driving requirements, solution and UAT processes with business and development teams
Understanding of best practices in the industry and application to real life
Proficient knowledge of KM systems implementation and development life cycles.
Deep understanding of differences in cloud versus on-prem platforms
Experience in managing end-to-end KM transformations and deep experience in Knowledge management technical solutions like Content Management Systems (like contentful, lifreray or similar), customer Portal (AEM or similar), Search technology
Experience with platform and vendor selection
Experience with identity management, integration solutions as it relates to Knowledge management platforms

Preferred Qualifications

Experience in consulting firm Experience in high growth, complex companies
AI-Machine Learning concepts, applications and experience with ML technology
Experience with SAP preferred or other ERP
Proficient in Powerpoint, and knowledge of Scrum or waterfall methodologies
Experience with reporting solutions

Our Commitment

Sr. Dir, Order Fulfillment Management (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

The Sr Director, Order Management & Execution (OM&E) will play a crucial role in ensuring customer order delivery by role modeling collaboration, fostering teamwork and inspiring a high-performance culture, focused on delivering business results across the Global Operations team. The ability to lead and manage effectively in a matrixed, global organization is critical. Candidates must have the ability to communicate clearly and effectively with key stakeholders in Sales Operations, Product Management and senior executives. Self-confidence, initiative and the ability to think calmly under pressure are critical attributes. The candidate must be familiar with operating in a global environment and is creative, strategic, personable, achievement oriented and adaptive in leading transformational change throughout a highly matrixed organization.

What You’ll Do

Reports to the Managing Director of Order Management and Execution (OM&E) and will have ownership for Order Management & Execution across manufacturing sites in Korea, Malaysia and Taiwan; including functions in India.
The OM&E leaders’ mission is to enable customer deliveries to meet requested shipment timing, enable future order factory capacity and meet product lead times while also meeting Manufacturing cost commitments. The leader must understand product and market requirements and work closely with Global Operations counterparts to enable strategic and operational commitments.
Responsible to drive performance for On-Time as Committed shipments, meeting Customer demand to requested need dates, and Configuration Quality and Accuracy
Direct functional responsibilities for System Project Management, Configuration Engineering, and Production Control
Drive achievement of organizational goals, culture & core values through delivery of cross-functional objectives and people strategies
Responsible for configuration management, order commitment, order change management, enabling manufacturing processes, and shipment execution.
Work with internal business partners to ensure configuration management processes are robust and high quality to ensure customer configuration expectations are met.
Partners with internal stakeholders in Sales Operations, Product Management, and Global Operations to drive continuous improvement in order fulfillment processes to improve competitiveness in meeting customer needs and product lead times

Who We’re Looking For

Bachelor’s degree, Masters (MBA, Engineering, Supply Chain or other Operational discipline) preferred
10-15+ years in relevant operational disciplines, with cross-functional experience in a global environment. At least 5-years’ experience working directly with VP level executives
Strong working knowledge of manufacturing operations is required
Excellent communication and presentation skills are a must, excellent executive presence
Strong business acumen, relationship skills and the ability to speak with data
English fluency

Preferred Qualifications

Experience in semiconductor, aerospace, health care or similar industries is preferred.
Experience leading a global team through a period of significant change and growth is preferred
Ability to think strategically and translate strategy into locally relevant operational plans
Ability to influence in a matrix organization across Business Units
Agility – the ideal candidate actively prioritizes and manages through multiple priorities, quickly and smoothly
Able to identify opportunities for value-creating/positive change, can craft a vision and architect a change strategy in collaboration with multiple stakeholders
Ability to set and manage accountabilities and expectations at all levels, acts quickly to resolve conflicts
Ability to travel up to 20% of the time and work across time zones especially with Lam factories in the U.S., Korea, Taiwan, Malaysia and Austria

Our Commitment

Sales Operations Supervisor (Korean Speaking) (Batu Kawan, Penang, MY)

Job Description

Works with company-wide cross functional teams to provide timely and accurate forecasts to executive teams on Booking/Shipment/Revenue
- Need to be able to quickly come up to speed on company products and leverage that learning to manage forecasts
- Develop/maintain close relationship with overseas Sales and Regional Business Operations team to achieve the desired forecast objectives; align with their input as well as provide directions back to the team to achieve company goals on a regular basis
- Work closely with Sales/Finance/Business Development team to review and monitor commercial deals execution to ensure compliance and uphold company's business objectives
- Support Sales, BD, and R&D team’s effort in new business opportunities, and understand its potential impact to near-term & long-term business forecast
Manage configuration, non-standard requests, shipment slotting, and shipment delivery
- Collaborate with overseas Account team and Order Fulfillment team to understand customer’s specifications and configuration needs
- Lead shipment configuration reviews with Manufacturing teams (based in both US and overseas) and Product Groups (based both in US and overseas) and provide timely and accurate configuration content to Supply Chain & Manufacturing team and achieve on-time tool delivery
- Review and process customers purchase orders; ensure PO compliance to established commercial and legal terms for all shipments
- Communicate with account teams on committed ship dates, and manage any ship date miss and recovery
- Coordinate with manufacturing and shipping & logistic teams to ensure on-time delivery
- Respond to any post-delivery issues, drive mitigation plan and root cause analysis by leading cross-functional alignment
Assist Corporate Business Development and Account Teams in preparing & hosting customer meeting to improve business outcome

Who We’re Looking For

Bachelor’s degree required
Minimum of 6 years working in technology industry
Korean language proficiency preferred
Adaptable, flexible, open for new way of doing things
Good communication skills, bias to action, results driven
Strong analytical and problem-solving skills
Ability to multi-task, work in a cross-functional environment, lead and influence others for solutions

Preferred Qualifications

Operations or business background in semiconductor industry
Knowledge of CRM/SAP, Microsoft Office Applications

Our Commitment

Operations Data Science and Analytics (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

Join Lam as an Operations Business Analyst, where you'll spearhead process improvement initiatives. With your data expertise, you collect and analyze data through a range of Business Intelligence (BI) tools and apps, develop metrics, and identify root causes with data-driven indicators for future improvements. Organizing cross-functional project teams, you communicate team progress and survey best practices, showcasing your commitment to operational excellence at Lam.

What You’ll Do

As a Data Science & Analytics Analyst Lead in Global Operations organization at Lam Research you will be responsible for implementing Data Science and Analytics solutions to support decision making and scaling operations. You will be working directly with various business units within Global Operations in helping them solve their business problems and opportunities, develop business requirement documentation, formulate proof of concepts where back testing is applied. All of this in collaboration with data architecture, business units, and development teams. You will also be working with application and business development teams in the design of complex solutions and ensure that they are in alignment with the COE data principles, standards, strategies.

Lead data science, analytics strategic plans, support the development of enterprise data, and analytics initiatives for Global Operations organization in alignment with Lam’s Analytics guidelines.
Manage, plan, and organize the overall data science, architecture, and analytics programs with activities aligned with the mission, vision, and goals of the business.
Develop scalable business processes, data science initiatives, analytic programs to support quantifiable business objectives and goals.
Continuous Improvement mindset leveraging lean agile development methodologies and deploying advance analytics solutions.
Develop and maintain professional relationships at all levels; manage high level customer relations; communicate and collaborate with business partners.
Lead and coordinate activities to ensure transparency and deliverables are being met.

Preferred Qualifications

Minimum of 12 years of related experience with a Bachelor’s degree; or 8 years and a Master’s degree; or a PhD with 5 years experience; or equivalent experience.
Building AI/ML solutions, Data Science, Engineering, Analytics Strategy for various business units in Global Operations.
Must know SQL to extract information from various data warehouses data factory, data fabric, synapse, SAP HANA, ABAP, SQL Server.
Knowledge of SAP ECC/S4 or other ERP systems Material and Vendor Master, Purchasing, MRP, Order Management, BOM, Logistics, Spares, Warehouse.
Expert understanding of AI/ML & statistics where tools like Python, R, PowerBI, MS Excel, SQL Data models or similar tools that can help drive actionable insights within data quality guidelines.
Presenting ideas and storytelling with data to decision/policy makers or a large audience.
Develop meaningful metrics in support of enterprise and line of business strategies.
Create clear and concise reports in a variety of formats (pdf, word, PowerBI/BI tool, etc.).

Our Commitment

Financial Analyst 4 (Batu Kawan, Penang, MY)

The Impact You’ll Make

This role primarily supports SEA financial forecast and Business Finance activities. The employee will support various aspects of the business financials to enable better decision making and improve the financial positions with analysis, management reporting, and financial operations. The role also supports regional CSBG SOX coordination, process enhancement and audit closures.

What You’ll Do

Develop, analyze and business partnering with operations to present financial information in a timely manner to enable decision making and meeting the financial accountability of the organization to various stakeholders.
Responsible in forecast inputs, analysis and period close journals of revenue, costs, spending to ensure high level of accuracy between forecast and actuals. Recommend financial solutions to improve profitability and ease of revenue/cost recognition. Involve in Business Finance Operations, resolve issues that may implicate Revenue/cost recognition, including support to Balance Sheet Review, revenue rebate programs management.
Compliance analysis and reporting relating to CSBG SOX compliance.
Undertake streamlining projects and initiatives involving systems improvement, reporting improvement.
Matrix accountability to respective supervisor.
Any other duties as assigned by the Supervisor.

Who We’re Looking For

Accounting / Finance or Business Degree with Finance modules, or CIMA / ACCA equivalent.
At least 10 years of Finance / Accounting experience with > 5 years of recent experience in Analysis & at least 2-3 years handling audit / SOX tasks is preferred.
Experience in supporting business finance operations (Revenue & Cost Recognition, manage rebate programs, etc.). Proven track record of business finance analysis and executive reporting.
Audit background strongly preferred and/or good knowledge of US GAAP.
Noteworthy experience in leading systems improvement projects would be an advantage.

Preferred Qualifications

Possesses strong inter-personal and communications skills. Out-going personality and successful examples in cross-functional collaboration, managing difficult work partners.
Is meticulous and has a sharp eye for details. Efficient in time-management and able to prioritize in execution. Task accuracy is fundamental.
Commands good oral and written English.
Has ability to work independently, possesses good analytical and problem-solving skills.
Good working knowledge of SAP (and/or Business Intelligence, BI analytics) preferred.
Very strong in Microsoft Excel and Microsoft PowerPoint

Our Commitment

IT Engineer 3 (Batu Kawan, Penang, MY)

Key Roles and Responsibilities

Quality Assurance (QA)

Develop and implement QA standards and procedures for deskside services.
Conduct regular audits and assessments to ensure compliance with QA standards.
Identify areas for improvement and recommend corrective actions.

Knowledge Management (KM)

Develop and maintain a comprehensive knowledge management system.
Ensure that knowledge articles are accurate, up-to-date, and easily accessible.
Promote knowledge sharing and collaboration across the organization.

Process Management

Analyze and optimize service processes to improve efficiency and effectiveness.
Document and maintain process workflows, procedures, and guidelines.
Implement process improvement initiatives and monitor their impact.

Training and Support

Provide training and support to staff on QA, KM, and process management practices.
Develop training materials and conduct workshops as needed.

Collaboration

Work closely with IT, service desk, and other relevant teams to ensure alignment with QA, KM, and process management objectives.
Participate in cross-functional projects and initiatives.

Who We’re Looking For

Experience

Proven experience in quality assurance, knowledge management, and process management.
Familiarity with ITIL framework and best practices.

Technical Skills

Proficiency in QA tools and methodologies.
Experience with knowledge management systems and tools.
Strong understanding of process mapping and optimization techniques.

Analytical Skills

Strong analytical and problem-solving skills.
Ability to analyze data and generate meaningful insights.

Communication Skills

Excellent verbal and written communication skills.
Ability to collaborate effectively with cross-functional teams.

Organizational Skills

Strong organizational and time management skills.
Attention to detail and accuracy.

Expected Deliverables

QA Standards and Reports

Develop and implement QA standards and procedures.
Conduct regular QA audits and generate audit reports.
Identify and document areas for improvement and corrective actions.

Knowledge Management System

Maintain an up-to-date and comprehensive knowledge management system.
Ensure knowledge articles are accurate, relevant, and easily accessible.
Promote knowledge sharing and collaboration through regular updates and communications.

Process Documentation and Improvement

Document and maintain process workflows, procedures, and guidelines.
Identify and implement process improvement initiatives.
Monitor and report on the impact of process improvements.

Training Materials and Workshops

Develop training materials on QA, KM, and process management practices.
Conduct training sessions and workshops for staff.

Conduct training sessions and workshops for staff

Provide ongoing support and guidance to staff on QA, KM, and process management.
Participate in cross-functional projects and initiatives to ensure alignment with organizational objectives.

Our Commitment

Business Function Intern 1 (Batu Kawan, Penang, MY)

What You’ll Do

•Assist in the preparation and review of Malaysia corporate income tax returns

•Assist with preparation of Malaysian indirect tax returns

•Assist in the preparation of workpapers for the United States federal consolidated income tax return and state income tax returns

•Assist in the review of transfer pricing documentation and calculations

•Assist with preparation and review of income tax provision workpapers

•Assist with internal controls documentation and compliance

Who We’re Looking For

Currently pursuing a Degree in Accounting, Economics, or a relevant field.
Strong communication skills, proficient in both spoken and written English.
Detail-oriented and highly organized.
Ability to manage multiple tasks effectively and consistently meet deadlines.
Must be a team player willing to work in a dynamic environment.
Proficiency in Excel is an added advantage.

Our Commitment

Accounting Intern (Batu Kawan, Penang, MY)

What You’ll Do

Provide accounting transaction processing support in accordance with established processes, work procedures, SOX requirements and local company legal and statutory requirements.

Roles & responsibilities:

•   Assist in month-end and quarter-end accounting close process.
•   Support data entry procedures.
•   Assist in reconciling bank statements/vendor statements and reporting the variances.
•   Review and validate customer/vendor audit confirmation letters and obtain authorized signatures.
•   Carry out reporting activities and analysis as instructed by superior.
•   File and maintain proper accounting records and supporting documents.
•   Any other ad-hoc tasks as assigned by the reporting Manager.

Who We’re Looking For

•   Currently pursuing a Degree in Accounting, Economics, Finance or relevant field
•   Willingness to learn on the job
•   Good communication skills in English – both oral and written
•   Good organizational and coordination skills and attention to detail
•   Able to prioritize and adhere to deadlines
•   Able to work in a team-oriented environment
•   Good computer skills

Our Commitment

Business Function Intern 1 (Batu Kawan, Penang, MY)

The Group You’ll Be A Part Of

Sharpen your financial acumen and gain valuable experience in the fast-paced world of Credit and Collections at Lam Research!

Join our team and contribute to ensuring timely payments and maintaining healthy customer relationship.

This Internship offers an exciting opportunity to learn, grow and contribute to Lam’s financial success.

The Impact You’ll Make

You’ll develop essential skills in communication, problem solving and financial analysis throughout the internship tenure.

What You’ll Do

Understand the overall Credit and Collection workflow
Analyze invoices and customer accounts to identify potential collection issues
Process payments and update customer accounts
Prepare necessary reporting such as AR Aging report and perform financial analysis
Perform e-invoicing submission into customer portal/IRB

Who We’re Looking For

Strong analytical and problem solving skills.
Detail-oriented and organized with a proactive approach.
Ability to work independently and as part of a team.

Preferred Qualifications

Currently enrolled in a Bachelor’s degree program in Accounting or Finance.
Understanding of basic accounting principles and collection practices a plus

Our Commitment

Dir, Supply Chain (Batu Kawan, MY)

The Group You’ll Be A Part Of

The Impact You’ll Make

This executive position resides within the Global Operations Supply Chain organization and reports to the head of Strategic Commodities. This person will collaborate with the Executive management team, Supply Chain Executives and Product Group Executives. Location of the position is in Lam Research Malaysia and will include Global Supplier Management.

What You’ll Do

Develop a 3-year vision, strategy, and organizational structure for assigned commodities. The strategy should enhance competitive differentiation and address commodity availability, quality, and cost.

(Your focus area will be managing suppliers for PCBAs and electronic components)

•   You & your team will be responsible for architecting and delivering a complete end to end strategy that supports Lam’s 3-year horizon:
o   Supplier selection (Expansion & consolidation) that meet business needs
o   Deliver & focus supplier investments (R&D & capacity expansions) that are aligned with Lam’s needs
o   Responsible for commercial negotiation that result in achieving annual objectives for cost, quality, lead time & flexibility.

SKILLS:

Leading:

o   Execute the vision and implement the strategy by gaining executive alignment and motivating and engaging the workforce to fulfill the vision.
o   Lead sourcing negotiations.
o   Drive business processes that enable effective prioritization and facilitate faster customer solutions.
o   Provide inspired leadership and direction to the global supply chain organization. Continue to build and develop a world class team in an environment where successful people want to work.
o   Lead a geographically dispersed team of approximately 10 employees, including some matrix employees.
o   Instill a culture of quality and discipline with all our suppliers.

Managing in a complex environment:

o   Build and maintain a strong employee organization through strategic hiring, development, and performance management. Develop and execute the optimum geographic distribution of the organization to get the desired results most effectively.
o   Manage supplier relationships to deliver negotiated value
o   Develop strong, collaborative, and effective relationships with the internal product groups; including when supply chain and product group goals are opposing.
o   Make decisions under pressure, sometimes with incomplete information and under tight deadlines and pressure
o   Be able to navigate Lam and supplier constraints such as source locking and moving suppliers.
o   Successfully operate across boundaries & prioritize the activities of the organization to achieve best in class results.
o   Develop and present meaningful and impactful messages to a wide array of audiences: C-level, Peer VPs, Global Supply Chain, Suppliers and Customers

Who We’re Looking For

A minimum of 15 years of professional experience, preferably with a minimum of 5 years in executive management roles.
•   Has worked in an executive leadership role within a global matrix managed multi-site company with manufacturing and supplier operations spread over multiple continents with at least $1 billion in revenue.
•   Has extensive experience interfacing with customers and suppliers and managing these relationships on product issue identification, problem resolution and total experience.
•   Demonstrated business orientation and proactive leadership that identifies and anticipates problems, issues, and risks to project outcomes and manages those issue in advance of a critical situation.
•   Demonstrated success at using rigorous logic and methods to solve difficult problems with effective solutions.
•   Hands on approach. Attention to detail.
•   Proven record in leading a large organization to new level of performance
•   Has led and developed high performing teams and demonstrated ability to maintain and engage staff.
•   Interpersonal and leadership skills across multiple cultures in North America, Europe, and Asia
•   Be able to lead & influence technically strong employees
•   Believe, practice and reward core values (achievement, honesty and integrity, innovation and continuous improvement, mutual trust and respect, open communication, ownership and accountability, teamwork, think customer, company, individual)
•   Executive presentation skills for internal and external executive presentations
•   Operational background required
•   Certification in Lean Six Sigma Master blackbelt preferred
•   Experience in Semi-Conductor or High-Tech Industry preferred

EDUCATION:
Bachelor’s degree in Business Operations, Supply Chain, or Engineering Equivalent, MBA or equivalent post graduate qualification desirable

Our Commitment

Senior Internal Auditor (Batu Kawan, Penang, MY)

The Impact You’ll Make

What You’ll Do

Assist with preparation of the audit engagement planning, including risk assessment and audit scope development, as necessary.

Perform walkthroughs with process owners to identify key processes and controls, as well as identify gaps.

Plan, develop, and execute audit programs to adequately identify and assess risks.

Prepare audit documentation in a clear, concise, and timely manner consistent with the project milestones.

Design and execute data analytics procedures to enhance audit efficiency and effectiveness.

Develop and implement data analytics, including data scripting, to support operational audits, investigations, and continuous monitoring.

Establish automated methods to analyze large data sets for outliers, irregularities, patterns, and trends, and evaluate control effectiveness.

Implement continuous monitoring techniques using data analytics tools.

Develop reporting, visualizations, and dashboards to communicate results, including risks and audit findings.

Stay updated with industry best practices, emerging trends, and regulatory changes in data analytics and internal auditing.

Provide support and guidance to other team members on data analytics tools and techniques.

Perform Sarbanes-Oxley (SOX) Controls IT testing, and review testing procedures performed by other team members.

Who We’re Looking For

Bachelor's degree or higher in Accounting, Finance, Computer Science, Management Information Systems, Business Management, or a relevant field.

A minimum of 3-5 years of experience in relevant areas of Data Analytics, external or internal audit, and IT audit.

Relevant professional certification (CISA, CISSP, CPA, CIA, etc.) or MBA.

Proficiency in data analytics tools and software (e.g., ACL (Galvanize), IDEA, SQL, Python etc ).

Prior experience in public accounting or Internal Audit or other Finance or Accounting functions in a multinational company.

Strong analytical and problem-solving skills, with the ability to interpret data and provide actionable insights.

Excellent communication and interpersonal skills, with the ability to present findings clearly and concisely to stakeholders.

High attention to detail and strong organizational skills.

Self-motivated, detail-oriented, and can work well both independently and in a team.

Excellent verbal and written communication skills, with the ability to effectively present audit results at various levels of management.

Intellectual curiosity.

Ability to adhere to the Code of Ethics and Standards of Practice as outlined in the International Professional Practices Framework (IPPF) mandated by the Institute of Internal Auditors.

Must be able to speak, read, and write in English. Other languages, such as Chinese, Japanese, and Korean are a plus.

Ability to travel up to 30 percent internationally.

Preferred Qualifications

IT audit experience including, but not limited to, Cybersecurity, Information Security, IT General Controls (ITGCs), and IT Application Controls (ITACs).

Forensic accounting, fraud, and/or investigations experience.

Knowledge of internal controls, the COSO internal control framework, SOX 404 requirements, US GAAP, and the Institute of Internal Auditors’ International Professional Practices Framework (IPPF).

Ability to effectively analyze large data sets, and leverage, contribute, and improve the data analytics library. Prior experience with analytical applications such as ACL, IDEA, or PowerBI is a plus.

Knowledge and experience of testing IT general and application controls and experience with SAP financials is a plus.

Our Commitment

IT Engineer 3 (Singapore, SG-Singapore, SG)

The Group You’ll Be A Part Of

The Impact You’ll Make

This individual will be part of the Global End-User Computing Services at Lam, working with state-of-the-art tools and techniques in the endpoint software lifecycle management (SLM) field. This individual will be responsible for driving critical activities and projects to success, as well as shaping the future of Lam's software lifecycle management (SLM) processes and environment.

What You’ll Do

Act as a change reviewer/approver change which are impacting the digital end-user experience (monitoring, orchestration, test coordination, documentation etc.)
Improve and mature Lam’s global Early adopter program
Develop and implement strategies to improve end-user experience across digital platforms.
Conduct user research, usability testing, and feedback analysis to identify pain points and areas for improvement.
Collaborate with IT, design, and product teams to enhance user interfaces and system functionality.
Ensure consistency in user experience across different devices and platforms.
Monitor performance metrics and user satisfaction scores to drive continuous improvement.
Provide training and support to teams on best practices for user experience optimization
Manage all Lam-approved licensed software and ensure accurate information on entitlements
Analyze software-related risk and impact, license usage data and associated vulnerabilities
Participate in remediation projects to license and software vulnerability compliance
Develop or contribute to SLM-strategies for license, costs, and performance optimization
Oversee and coordinate with vendor/procurement team on license renewals
Lead the license management team, providing direction, support, and feedback.
Generate periodic reports on software usage, compliance metrics, and savings achieved for leadership teams.
Any other tasks as assigned by immediate supervisor

Who We’re Looking For

Minimum Bachelor’s degree (Computer Science / Engineering / Information Systems)
More than 5 years of relevant experience in software lifecycle and vulnerability management along with associated monitoring-/metering solutions and Endpoint Analytics.
Hands-on exposure to and experience in remediation activities as part of Vulnerability Management in large enterprises with an understanding of the Microsoft cloud eco-system (M365, Windows365, VirtualDesktop) and related interfaces
Exposure to ISO27k processes, controls, audits, and certification activities will be an added advantage
Team player with hands-on mentality and able to collaborate within cross functional teams
Intrinsic motivation for the area of endpoint security and continuous improvement mentality, to stay in the know of state-of-the-art technologies, processes, and security threats
Proven analytical and problem-solving skills with the ability to communicate to non-technical audience
Excellent written and oral communication skills

Preferred Qualifications

Our Commitment

Field Service Engineer 2 (Singapore, SG-Singapore, SG)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Field Service Engineer at Lam, you will step into the limelight of customer support. You're on the front lines, understanding customer needs and collaborating with various teams to deliver solutions. In this role, you will be responsible for providing quality repair and carrying out preventive maintenance service of Lam etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up, and troubleshooting activities.

What You’ll Do

Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
Provide warranty tool support or paid service for out-of-warranty tool by performing on-site preventive maintenance of equipment and attending to equipment abnormalities. Coordinate all service actions with customer to minimize downtime or system interruptions
Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components, or parts where appropriate
Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems, and subsystems
Carry out Tier 2 process qualification work
Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates, and other management reports
Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
Develop good customer relations during installation and execution of service contracts
Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts, etc.) in good working condition, and ensure it is secure and accounted for
Take on ad-hoc duties as and when assigned by the Immediate Supervisor

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering or related field with 3+ years of experience; or hands-on experience in troubleshooting Deposition/Etch equipment.
Self-starter who can work independently and has a deep desire to learn and grow with the Company
Strong interpersonal and communication skills
Able to actively engage customers on technical solutions
Willing to support short term, overseas assignment
Able to work swing shift (Tues – Sat and/or Wed – Sun)
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
Able to perform rostered 24/7 on call standby duty for a week

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Section Manager, Regional Accounting & Compliance (Singapore, SG-Singapore, SG)

The Group You’ll Be A Part Of

The Impact You’ll Make

This role covers supervision of all accounting & statutory compliance activities of SEA Regional Finance. This includes but is not limited to payroll, statutory, accounting, and business financial analysis activities. The employee will be required to supervise the accounting team, and drive accounting/compliance projects. The role will also support revenue recognition, and various aspects of distribution & business finance transactions & analytics.

What You’ll Do

Drive monthly and quarterly financial close accounting analysis and entries. This includes guide, review, approve journal entries of the team and the outsource accounting support.
Ensure smooth running of the Business Finance Operations: Drive & review AR collection/reporting to meet KPI. Understand and resolve issues relating to GST, rebates, that may implicate AR / Revenue recognition.
Support statutory audits & reporting which includes annual audit and taxation matters, transfer pricing analysis. Support internal audits, preparation of schedules, retrieval of information from business partners to deliver compliance and controls.
Oversee the monthly payroll administration, year-end individual Income Tax Reporting, payroll forecast, including liaison with both internal business partner and payroll outsource provider.
Business partnering with Account teams & Operations through supporting financial analysis, recommend financial solutions to improve on profitability, AR collectability and ease of revenue recognition.
Undertake streamlining projects and initiatives involving systems improvement, reporting improvement.
Guide & develop the accounting team. Key liaison to ensure smooth support of outsource accounting support.
Any other duties as assigned by the Supervisor.

Who We’re Looking For

Bachelor's degree or equivalent with more than 15 years of Finance / Accounting experience with > 5 years of handling audit / SOX tasks.
Experience in supporting business finance operations (payroll processing, business forecast, revenue recognition, billing, rebates program management, AR collection, etc.) Proven track record of business finance analysis and executive reporting.
Noteworthy experience in leading systems improvement projects would be an advantage.
Good knowledge of US GAAP and Singapore FRS.
Good working knowledge of SAP (ECC or S4 Hana) preferred.
Possesses strong inter-personal and communications skills. Successful examples in cross-functional collaboration, managing / influencing difficult work partners.
Experience in leading a team (direct report or project team) is preferred.
Commands good oral and written English.
Has ability to work independently, possesses good analytical and problem-solving skills. Ability to understand business processes / operations.
Is meticulous and maintains detailed and accurate accounting records. Efficient in time-management and fast in execution.

Preferred Qualifications

Our Commitment

Field Process Engineer 2 (Singapore, SG-Singapore, SG)

The Group You’ll Be A Part Of

The Impact You’ll Make

At Lam, as a Field Process Engineer you are a customer-focused expert on our equipment, pushing the boundaries to meet customer needs. You play a vital role in supporting the customer in installations, training, and identifying design improvements with product groups. Your portfolio includes providing on-site support at customer sites which include being familiar with customer wafer fabrication processing flow and techniques, addressing potential integration challenges with systems which impact or are being impacted earlier or later in the process flow. This includes Design of Experiment (DOE), process evaluation and documentation of process outputs relating to hardware installations, medications / upgrades to existing systems.

What You’ll Do

Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
Work with Account team and customers to execute to penetration and defense strategy, including coordinating with Global Product Group on product demonstration
Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
Develop new processes to new and/or existing customer applications
Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
Develop good customer relations during start-up and trouble-shooting
Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
Ensure safe working condition at work site
Any other duties as assigned by the Immediate Supervisor

Who We’re Looking For

Minimum Qualifications:

Masters of Science in Chemistry, Physics, Material Science, or related field; or Bachelors of Science with 3+ years of relevant work experience.
This is a graduate eligible role.
Systematic and has an analytical mindset
Good communication and interpersonal relations skill
Able to actively engage customers on technical solutions
Able to work in Fab environment and perform standby duties
Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
Willing to support short term, overseas assignment

Preferred Qualifications

In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Foundational analytical, problem solving, and decision-making skills.

Our Commitment

Business Function Intern 1 (Singapore, SG-Singapore, SG)

The Group You’ll Be A Part Of

The Global Human Resources Group operates on the understanding that our people are our most valuable assets. They think globally to optimize our workforce, integrate our Core Values into everything we do, and deliver the HR solutions to enhance the employee experience and enable future growth.

The Impact You’ll Make

This internship will be part of the Human Resource Shared Services (HRSS) team. Singapore is the hub for all HR Shared Services for Asia (covering China, India, Japan, Korea, Malaysia, Singapore and Taiwan). Partnering the Singapore HRSS Lead, the intern will receive a variety of work assignment from the e.g. Partner Singapore HR Services team on ongoing Regional and Global automation / system related projects. Hands on training regarding system data integrity to assist with routine audit checks, develop FAQ guides to assist employees and managers with queries on SEA HR Automation platforms and validate and roll out new SEA HR sharepoint site.

As a HRSS Intern, you will have the chance to :

Participate in automation / system projects that are being developed in Singapore / across Asia
Hands-on experience regarding the process to upkeep and maintain data integrity within HR systems
Interact with HRSS team members in different Asia countries

What You’ll Do

Contribute to the development and testing of ongoing Automation / System related projects (Onboarding 2.0, SEA Confirmation Automation, SEA Employment Letters self-service platform, Success Factors Letter Generation Function etc.)
Design and develop FAQ guides to assist employees with their queries on Lam’s benefits (1. SEA Offboarding – Employee, Managers, HRSS; 2. SEA Travel Insurance Certification Site; 3. SEA Employment Letters self-service platform)
Assist with the maintenance of data integrity within HR systems, including independently completing routine audit checks to ensure data consistency
Validate the new design interface and roll out new SEA HR sharepoint site
Complete other assigned projects / tasks under supervision of Singapore HRSS Lead

Who We’re Looking For

Good standing as a Year 1 or 2 Business student from a Singapore University
Some experience working with data
Proficient in Microsoft Excel, Word, PowerPoint
Critical thinking skills
Excellent written and oral communication skills
Proven ability to translate ideas into action
Teamplayer and meticulous
Multi-lingual

Preferred Qualifications

Our Commitment

Mechanical Engineer 3 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to CSBG Engineering.

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
Provide technical guidance and mentoring to more junior engineers.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Mechanical Engineering or related field with 5+ years of experience; or Master’s degree with 3+ years; or equivalent experience.
Excellent communication, both written and verbal, and technical presentation skills.
Highly proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others.
Hands-on experimental and design background coupled with solid engineering skills.

Preferred Qualifications

Experience in Semiconductor industry is a plus.
Experience in project management, managing projects, or problem solving while managing time and multiple priorities.

Our Commitment

#LI-LE1

Salary

CA San Francisco Bay Area Salary Range for this position: $84,000.00 - $185,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Field Service Engineer 2 (Kaohsiung, TW-Kaohsiung-01, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

TW Sr Technical Specialist - FP (Kaohsiung, TW-Kaohsiung-01, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide process support, installation, resolve and improve process/system/productivity, and develop processes of new applications of Lam equipment at customer sites.
Serve as key field support for Beta sites, evaluations, or first-in-fab installations.
Design and conduct experiments, collect data, analyze results, generate reports, and provide recommendations to optimize device architecture and process modules.
Partner with customers to meet requirements for new technology process, to support existing processes, and to address process deviations through root cause analysis.
Develop new or modified processes, define best known method process recipes, and partner with the hardware engineering to define chamber requirements and characterize hardware designs to meet customer performance requirements.
Collaborates with cross-functional teams and customers to understand their needs, technology roadmaps, process flow, requirements, and business challenges.
Represent Lam to our valued customers and deliver exceptional customer satisfaction.
Present technical and marketing materials with a win-win mindset to keep customers informed about products and services to address their needs.
Provides technical leadership, support, and instruction for Field Service Engineers, Technicians, sub-contractors, and customers on installs, repairs, operations, and coordinates application of new procedures.
Collaborate with Field Service Engineers on complex problems impacting process output.
Coordinates statistical analysis of failure rates and develops continuous improvement plan (CIP).
Recommends design changes to key technical solutions, and process development, and monitors performance trends.

Who We’re Looking For

Minimum Qualifications:

PhD in Electronics, Chemistry, Physics, Material Science, or related field; or Masters of Science with 3+ years of relevant work experience; or Bachelors of Science with 6+ years of work experience.
Proficiency in computer applications, including data analysis tools, word processing, spreadsheet, and presentation software.
Excellent communication, written and verbal, and customer relationship skills.
Ability to work in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit, and on-call if needed.

Preferred Qualifications

In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Effective organizational skills and ability to manage multiple tasks simultaneously, reacting to shifting priorities, and meeting business needs and deadlines.
Excellent interpersonal skills with the ability to work effectively with diverse teams, customers, and partners.
Collaborative mindset in matrixed environment.

Our Commitment

TW Engineer - FS II (CST) (Kaohsiung, TW-Kaohsiung-01, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Field Service Engineer 2 (Kaohsiung, TW-Kaohsiung-01, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Order Admin Support 4 (Hsinchu, TW-Hsinchu-02, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

Processes orders for materials or merchandise from sales staff or direct customer contact. Maintains customer files with sales contracts and other information. Gives price quotations, completes order sheets and checks the price and quantity of each item listed. Distributes order sheets to respective departments. May coordinate with departments regarding order status, shipping dates, prices, product availability and back orders.

What You’ll Do

Who We’re Looking For

Minimum of 4 - 6 years of related experience.

Preferred Qualifications

Our Commitment

TW Sr Administrator - CSBG (Hsinchu, TW-Hsinchu-02, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Minimum of 4 - 6 years of related experience.

Preferred Qualifications

Our Commitment

Facilities Engineer 4 (Hsinchu, TW-Hsinchu, TW)

The Group You’ll Be A Part Of

Facilities, as an Occupancy Planner

The Impact You’ll Make

The intent of this position is to support space planning and management activities for the Taiwan campus portfolio. The Occupancy Planner is part of our on-site Global Occupancy and Space Planning team and will be responsible for space planning, programming, and supporting the team in developing occupancy plans. Also, processing new hire requests, terminations, and weekly move requests, with opportunities in helping to shape and launch space management policies, standards, and processes.

Responsibilities:

Build and maintain strong relationships with BU customers to provide excellent customer service

Gather programming requirements to develop project scope, schedule, and budget on office reconfigurations, move, and tenant improvement projects

Provide design layouts of new and existing office space and furniture as needed for move and tenant improvement projects

Working furniture vendors to develop move plans with space assignments, occupancy plans, and furniture reconfiguration requirements

Conduct building audits to verify that employee locations, furniture layout and room configurations are correctly noted on floor plans

Manages relocations including the development and execution of project planning activities, timing of group moves/relocations, and final relocations

Participates in the development and integration of space management tools, processes, standards, and policies to improve efficiencies

Present and negotiate with business units to implement plans aligned with corporate guidelines, including scenarios to optimize use of space while meeting business requirements

What You’ll Do

Who We’re Looking For

BS/BA degree in related discipline (i.e. architecture, interior design, Corporate Real Estate & Facilities Management planning/coordination, facilities, project or construction management etc.)
Minimum 3-5 years of related work experience in Move Management, Furniture Project Management, Space Planning, or Interior Architecture
Strong spatial skills with experience in the implementation of workplace strategies and the ability to translate business requirements into space requirements for the business units
Fluent in English a must

Preferred Qualifications

Our Commitment

Account Manager 5 (Hsinchu, TW-Hsinchu-02, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

As an Account Manager at Lam, you are essential to fostering lasting relationships with our valued customers. Engaging directly with customers, you'll proactively address their needs, arrange strategic meetings, and support them with a range of Lam’s wafer fabrication equipment products and services. Your dynamic approach ensures the success of our partnerships and contributes to Lam's position as an industry leader.

What You’ll Do

Who We’re Looking For

Minimum of 12 years of related experience with a Bachelor’s degree; or 8 years and a Master’s degree; or a PhD with 5 years experience; or equivalent experience.

Preferred Qualifications

Our Commitment

TW Engineer - FP, Intern (Hsinchu, TW-Hsinchu, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Preferred Qualifications

Our Commitment

Field Process Engineer 3 (Hsinchu, TW-Hsinchu, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide process support, installation, resolve and improve process/system/productivity, and develop processes of new applications of Lam equipment at customer sites.
Complete Design of Experiments (DOE) evaluations to characterize process window for new installations or recommended field hardware modifications.
Design and conduct experiments, collect data, analyze results, generate reports, and provide recommendations.
Develop new processes for small variants to existing customer applications.
Performs application related Project Management, including planning, defining problems and objectives, developing an approach, and providing recommendations.
Collaborates with cross-functional teams and customers to understand their needs, technology roadmaps, process flow, requirements, and business challenges.
Represent Lam to our valued customers and deliver exceptional customer satisfaction.
Present technical and marketing materials with a win-win mindset to keep customers informed about products and services to address their needs.
Provide technical instruction and mentoring for more junior engineers.

Who We’re Looking For

Minimum Qualifications:

PhD in Electronics, Chemistry, Physics, Material Science, or related field; or Masters of Science with 3+ years of relevant work experience; or Bachelors of Science with 5+ years of work experience.
Proficiency in computer applications, including data analysis tools, word processing, spreadsheet, and presentation software.
Excellent communication, written and verbal, and customer relationship skills.
Ability to work in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit, and on-call if needed.

Preferred Qualifications

In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Foundational analytical, problem solving, and decision-making skills.

Our Commitment

Account Manager 5 (Hsinchu, TW-Hsinchu-02, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Minimum of 12 years of related experience with a Bachelor’s degree; or 8 years and a Master’s degree; or a PhD with 5 years experience; or equivalent experience.

Preferred Qualifications

Our Commitment

TW Engineer - FS II (Hsinchu, TW-Hsinchu, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

TW Business Operations Manager (Hsinchu, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Minimum of 8 years of related experience with a Bachelor’s degree; or 6 years and a Master’s degree; or a PhD with 3 years experience; or equivalent experience.

Preferred Qualifications

Our Commitment

IT Engineer 6 (Hsinchu, TW-Hsinchu-02, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to the success of the Collaboration team, performing support for SharePoint, OneDrive, Teams, and Power Platform, as well as low-code/no-code solutions.

What You’ll Do

Provide L3 support for SharePoint, SIP, and other Collaboration tools (Teams, OneDrive, Forms, etc.).
Evangelize Collaboration tools and provide users information on best practices with participation in the Collaboration Center of Excellence.
Experience working on a SharePoint migration project (on prem to SharePoint Online)
Translate and document business requirements into functional specifications, process flows, diagrams to solve significant or unique business problems.
Perform and lead hands-on solution design, prototyping, proof-of-concepts, process design and development in support of current and new projects for SharePoint and Power Automate
Maintain and develop solutions with the Power Platform tools (Power Automate, Power Apps, Power BI).
Communicate and support Business Unit requirements and translate them into technical solutions.

Who We’re Looking For

Minimum of 15 years of related experience with a Bachelor’s degree; or 12 years and a Master’s degree; or a PhD with 8 years experience; or equivalent experience.
12+ years of related experience in SharePoint
3 years of experience in Power Automate
Skilled in analytical techniques and practices to support problem solving.
Excellent communication, both written and verbal, for various levels and audiences in English

Preferred Qualifications

Project management knowledge or experience is beneficial. PMP certification is a plus.
Detail-oriented with exceptional organizational skills.

Our Commitment

Field Service Engineer 2 (Hsinchu, TW-Hsinchu, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Field Service Engineer 3 (Taichung, TW-Taichung-01, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to ___.

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Troubleshoot and create customer response action plans to support customer needs.
Transparently discuss opportunities and challenges with customer to increase trust.
Provide technical instruction and mentoring for more junior engineers.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field and 5+ years of experience; or Master’s degree with 3+ years; or equivalent work experience.
Previous experience in installation, maintenance, repair, or troubleshooting of semiconductor capital equipment.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

TW Engineer - FP, Intern (Taichung, TW-Taichung-01, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Preferred Qualifications

Our Commitment

Production Planner/Master Scheduler 3 (Taoyuan, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

Plans, schedules, coordinates and/or monitors final approval of products through the complete production cycle. Works from engineering plans and production specifications to establish production schedules, labor loading, and capacity requirements. Coordinates production plans to ensure materials are provided according to schedules. Master Scheduler: Provides input to management; schedules and/or interfaces with marketing, sales, production and engineering managers. Works to resolve (in case of design changes) labor and material shortages, backlogs and other potential schedule interruptions. Oversees the master schedules and ensures comprehensive compliance with materials requirements for manufacturing.

What You’ll Do

Who We’re Looking For

Minimum of 5 years of related experience with a Bachelor’s degree; or 3 years and a Master’s degree; or a PhD without experience; or equivalent work experience.

Preferred Qualifications

Our Commitment

Production Planner/Master Scheduler 2 (Taoyuan, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Bachelor's degree and a minimum of 2 years of related experience; or an advanced degree without experience; or equivalent work experience.

Preferred Qualifications

Our Commitment

Production Planner/Master Scheduler 2 (Taoyuan, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Bachelor's degree and a minimum of 2 years of related experience; or an advanced degree without experience; or equivalent work experience.

Preferred Qualifications

Our Commitment

Sr. Master Scheduler (Taoyuan, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Who We’re Looking For

Minimum of 5 years of related experience with a Bachelor’s degree; or 3 years and a Master’s degree; or a PhD without experience; or equivalent work experience.

Preferred Qualifications

Our Commitment

Production Planner/Master Scheduler 1 (Taoyuan, TW)

The group you’ll be a part of

The impact you’ll make

What you’ll do

Who we’re looking for

No previous professional experience.

Preferred qualifications

Our commitment

Program/Project Manager 3 (Taoyuan, TW)

The group you’ll be a part of

The impact you’ll make

In this role, you will directly contribute to ___.

What you’ll do

Manage projects [insert group/functional area] related projects to solve complex business problems.
Build solutions that will improve [insert relevant] business processes and support critical business strategies.
Provide actionable insights for management to support decision making through data collection and analysis.
Develop and deliver clear and concise communications for leadership teams and stakeholders.
Ensure execution, manage risks, assure adherence to program or project schedules, and performance to meet business requirements.
Partner with cross-functional stakeholders to continuously improve the process.
Run change management for projects and programs and support proper project closure.

Who we’re looking for

Minimum Qualifications:

Bachelor’s degree in Supply Chain, Operations Management, Business, Engineering, or related field with 5+ years of experience; or Master’s degree with 3+ years’ experience; or equivalent experience.
3+ years of related experience in project management or program management
Experience coordinating cross-functional teams and influencing stakeholders.
Analytical skills to interpret and utilize data for decision support.

Preferred qualifications

Semiconductor industry or global supplier experience is a plus.
Excellent verbal and written communication skills.
Relevant project management certifications such as PMP, CAPM, Scrum Master, or PRINCE2.

Our commitment

Supv 1, Production (Taoyuan, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

Directs the development and implementation of activities in production area(s) to meet production goals, quality, and cost objectives. Prioritizes production schedules based on product introduction, equipment efficiency, and materials supply. Plans and administers procedures and budgets. Makes budgetary recommendations and at higher levels, controls capital expenditures and direct/indirect labor. Develops schedules and manpower requirements for assigned areas. Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

What You’ll Do

Who We’re Looking For

A degree or equivalent with 6+ years of related experience as an individual contributor.

Preferred Qualifications

Our Commitment

EH&S Engineer 3 (Taoyuan, TW)

The Impact You’ll Make

What You’ll Do

Develop, implement, and maintain site-level EHS management systems in compliance with local regulations and corporate standards.
Lead internal and external audits for ISO 14001 and ISO 45001 compliance and continuous improvement.
Conduct routine site inspections and risk assessments to identify unsafe conditions and recommend corrective actions.
Investigate EHS incidents, assist in root cause analysis and corrective/preventive actions implementation.
Provide EHS training programs to employees, contractors, and new hires.
Formulate, plan, and promote BCP and site and emergency preparedness initiatives, including drills and scenario-based exercises..
Manage contractor safety programs, including qualification review, permit-to-work systems, and on-site supervision.
Monitor and report EHS KPIs, trends, and performance metrics.
Manage changes to assess potential EHS impacts.
Communicate with regulatory agencies and prepare documentation for inspections, reports, and compliance filings.
Maintain up-to-date knowledge of applicable laws, standards, and industry best practices.
Lead or participate in corporate EHS initiatives and cross-site benchmarking.
Assist in developing annual EHS plans, including goal setting, budget planning.

Who We’re Looking For

We are looking for an experienced EHS professional with a strong background in occupational safety and environmental health, preferably with experience in the semiconductor industry. This individual should be capable of independently driving EHS programs, communicating effectively across departments, and ensuring full compliance with regulatory and corporate standards.
We seek a team member who not only possesses technical expertise but also demonstrates open communication and a strong spirit of collaboration. A mindset rooted in innovation and growth—with a willingness to embrace change, continuously learn, and drive improvement—is essential to thrive in this role.

Preferred Qualifications

Class B labor safety or health management license required; Class A is a plus.
Bachelor’s degree or equivalent in occupational safety, health, or a related field.
Experience in implementing or auditing ISO14001 and ISO45001 management systems.
Familiarity with environmental health and safety laws and internal communication practices.
EHS support experience in the semiconductor industry is a plus.
Basic to intermediate English communication skills (spoken and written).
Proficient in Microsoft Office applications.
Experience in Job Safety Analysis (JSA), ergonomic risk assessment, and hazard prevention.
Strong knowledge in electric shock and electrical fire hazard prevention.
Minimum 5 years of work experience in Class I industry OS&H functions.

Our Commitment

EH&S Engineer 2 (Taoyuan, TW)

The Impact You’ll Make

What You’ll Do

Assist the supervisor to formulate, plan and promote the safety and health management of the department, and guide the relevant personnel to implement.
Solid, comprehensive working knowledge/understanding of EHS field including related laws and regulations and ISO standards.
Communicate and assist in the prevention and investigation of ESH incidents in the department, and provide corrective action plans.
Assist the supervisor to guide the department to implement operational safety standards and conduct inspections, and declare or keep necessary records.
Good written, verbal, and interpersonal skills to communicate effectively in a diverse environment and internal departments.
Project management.

Who We’re Looking For

Preferred Qualifications

Class B labor safety or health management license required; Class A is a plus.
Bachelor’s degree or equivalent in occupational safety, health, or a related field.
Experience in implementing or auditing ISO14001 and ISO45001 management systems.
Familiarity with environmental health and safety laws and internal communication practices.
EHS support experience in the semiconductor industry is a plus.
Basic to intermediate English communication skills (spoken and written).
Proficient in Microsoft Office applications.
Experience in Job Safety Analysis (JSA), ergonomic risk assessment, and hazard prevention.
Strong knowledge in electric shock and electrical fire hazard prevention.
Minimum 5 years of work experience in Class I industry OS&H functions.

Our Commitment

Financial Systems & Processes Analyst 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

The Financial Systems & Processes Analyst will be responsible for day-to-day user support for a complex landscape including planning and forecasting for Gross Margin (systems sales and service), Headcount, and Opex at a capital equipment manufacturer.

While our current system includes SAP BW, we will be moving to a new system based on Workday. The ideal candidate will be able to adapt to different technologies to continue to support into the future.

What You’ll Do

Areas of support to include:

SAP Analysis for Office
Excel
SAP BW/BI Security request submissions and periodic audits
Break/Fix logging/tracking/testing
Managing reoccurring break/fix meetings
New enhancement request (requirements gathering, functional spec creation, testing, go-live support)
Create and maintain documentation
Others as required by business needs

Who We’re Looking For

Bachelor’s degree in Finance, Accounting, or business-related field with 5+ years of experience; or Master’s degree or equivalent certification (MBA, CPA, CFA, CA, CMA, or equivalent) with 3+ years’ experience; or equivalent experience.
Advanced knowledge of Microsoft Excel, dashboards, and data visualization.
Attention to details and demonstrated critical thinking and problem-solving skills.
Excellent interpersonal skills with ability to develop and maintain business partner relationships at all levels of the organization.
Ability to manage tight deadlines, prioritize workload; effective multi-tasking skills are vital.
Excellent communication and presentation skills, written and verbal.
Strong documentation skills
Strong Follow-through and Accountability
Desire to Learn new skills

Preferred Qualifications

Foundational understanding of US GAAP and India GAAP is a plus.
Prior experience within technology, manufacturing, or related industries.
Advanced analytical, financial modeling, and reporting skills.
SAP and Business Objects (or Workday Adaptive Planning) experience is highly desirable or demonstrable strong systems skills.
Experience in business intelligence (BI) technologies, tools, and concepts.
Ability to collaborate with diverse, cross-functional, and international teams including occasional flexible schedules to accommodate time zones.

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Supv 2, Purchasing (Taoyuan, TW-Taoyuan-01, TW)

The group you’ll be a part of

The impact you’ll make

Plans and implements activities related to the purchasing of materials, equipment and services for internal company use. Develops, communicates, and enforces company policies and procedures for purchasing. Reviews and approves purchases up to a specified dollar amount. May negotiate major contracts involving large dollar amounts. Monitors the cost, schedule and performance aspects of major contracts and subcontracts. Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

What you’ll do

Who we’re looking for

Bachelor's degree or equivalent with 2-4 years of supervisory experience.

Preferred qualifications

Our commitment

Process Engineer 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will directly contribute to the Deposition Products Group.

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Electroless & Electroplating Techniques.
Background in Plasma Physics, Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).
Knowledge of Material synthesis and material characterization.
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.

Our Commitment

IND123 #LI-CW1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Product Engineer 5 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Collaboratively engineer innovative semiconductor equipment and process design solutions to quickly resolve customer issues and improve product quality in a dynamic fast-paced challenging environment.
Lead product development projects from product prototyping, development, deployment/product release, and initial field support.
Independently design and conduct experiments, tests, and prototypes to resolve complex technical problems.
Present analysis and support technical recommendations clearly and concisely.
Collaborate with cross-functional and cross-cultural teams to guide the specification and development of products.
Provides technical support for installation and/or diagnosing, troubleshooting, repairing, and debugging complex product issues.
Maintain a high degree of customer engagement including face-to-face and international travel to customer sites supporting near term product releases and solve customer issues.
Work in a cleanroom lab and/or customer semiconductor fab environment.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Material Science, Electrical Engineering, Mechanical Engineering, Optics, Physics, Chemistry, Chemical Engineering, or related field with 8+ years of experience; or a PhD with 5+ years’ experience; or equivalent experience.
Exceptional analytical and experimental design skills.
Creative thinking, problem solving, and troubleshooting capabilities.
Exceptional clear communication and presentation skills.
Comfortable traveling up to 25% of the time.

Preferred Qualifications

Prior product design and technical engineer experience is beneficial.
Experience designing, specifying, building, operating, and maintaining semiconductor, automotive, aerospace, or related hardware, tools, and equipment.
Experience leading cross-functional teams.

Our Commitment

#LI-LH1

Salary

CA San Francisco Bay Area Salary Range for this position: $119,000.00 - $259,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 1 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

This position is an exciting opportunity to join Lam's electron microscopy team in Fremont, CA! We operate several generations of FEI/Thermo Fisher Helios tools, including the latest models.

The Impact You’ll Make

As a Metrology process engineer, you will operate several generations of FEI/Thermo Fisher dual beam Helios tools, including the latest models to prepare TEM lamella and images using in-situ STEM detectors. Samples are representative of a diverse set of processes from across the integrated circuit (IC) manufacturing process and will provide a dynamic set of challenges and opportunities for growth over the long term. Your expertise and knowledge play a crucial role in our process team and customers' success, impacting the next generation of semiconductor breakthroughs.

What You’ll Do

Work Schedule: 10:30 p.m. - 6:30 a.m. Sunday to Thursday or Monday to Friday.

Job Responsibilities

• The primary function is preparing lamella using Thermo Fisher Helios Dual Beam FIB tools, to be imaged either using in-situ STEM detector or on TEM sample preparation.
• Set up, operate, and troubleshoot equipment.
• Proper handling of sensitive customer samples and intellectual property.
• Work with process engineers to understand how to locate regions of interest, best process their samples, interpreting data, and troubleshooting when data does not meet expectations.
• Maintain integrity of experiments and data to provide valid results.
• Actively participate in developing new techniques to expedite sample processing.
• Provide new learnings and developments to other team members through documentation, presentations, and training sessions Collaborate with process engineers.
• Participate in evaluating new instruments for lab growth.
• Foster a healthy and inclusive working environment.
• Maintain a professional atmosphere and cordial working relationships.
• Adhere to Lam's Core Values

Who We’re Looking For

Minimum Qualifications:

• Major in Materials Science, Chemical Engineering, Chemistry or Physics; or
• M.S with 1+ years of relevant work experience
• BS with 3+ years of relevant industry experience
• Good written and verbal communication skills to work with a large internal customer base.
• Experience creating technical documentation.
• This is a graduate eligible role

Preferred Qualifications

• 2+ years of focused experience in dual beam FIB, SEM operation, and TEM sample preparation work experience
• Hands-on experience of Thermo Fisher Helios series tools.
• Knowledge of semiconductor devices and industry.
• Candidate should be self-motivated, organized, and interested in learning.
• Experience handling and protecting sensitive customer intellectual property.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $70,000.00 - $130,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Laboratory Service Engineer 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Laboratory Service Engineer at Lam, you're a pivotal force in maintaining and upgrading equipment in our applications lab. It’s not the typical lab—you’ll be hands-on with state-of-the-art systems, performing maintenance, troubleshooting, and calibration. You'll support innovative equipment providing installation and documentation, making you an integral part of our technology’s success.

In this role, you will also contribute to concept and feasibility hardware to enhance current systems and helping develop the next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment, performing preventive and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gases and liquids using required personal protective equipment (PPE).
Collaborate with cross-functional teams—including process development, hardware, and software engineering—on R&D activities, customer demonstrations, and equipment support.
Install and support prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks ranging from dynamic to routine, using clear and proactive communication.

Who We’re Looking For

Bachelor’s degree in a technical field with 5+ years of relevant experience; or an Associate degree in a technical field or equivalent military training with 7+ years of relevant experience; or equivalent work experience

Preferred Qualifications

Experience troubleshooting electrical, electromechanical, fluidic systems, and vacuum systems.
Proficient in using a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Able to work in a cleanroom environment while wearing personal protective equipment (PPE) or a cleanroom suit.
Experience in the semiconductor industry or familiarity with Lam products is a plus.

Our Commitment

#LI-SH2

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Material Handler 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Material Handler at Lam, you play a crucial role in the efficient coordination of materials—from shipping and receiving to storing and distributing. Your attention to detail in checking and processing goods, preparing shipments, and maintaining accurate records is essential to Lam’s commitment to operational excellence.

What You’ll Do

Perform a variety of tasks—both physical and administrative— involved in shipping, receiving, storing, distributing, and fulfilling merchandise, materials, parts, supplies, and equipment.
Review and manage customer orders, including labeling materials, recording locations, and managing the distribution of products within inventory warehouses, distribution centers, or manufacturing lines.
Complete material transactions in SAP, perform cycle counts, create non-conformance reports, and close required tasks.
Prepare products for shipment, including oversight of crating of outbound material, arranging for nonstandard crating, and finished goods packaging and loading.
Operate and maintain material handling equipment such as trucks, forklifts, cranes, and other equipment.
Support a safe work environment by following safe work practices, using appropriate Personal Protective Equipment (PPE), and adhering to Lockout/Tagout (LOTO) policies and procedures.

Who We’re Looking For

2-4 years of related experience with a Technical Certificate or Diploma.
Strong ommunication skills, both written and verbal, in English.
Foundational computer skills including use of warehouse management software (WMS) such as SAP, and Microsoft Office Suite (Excel, Word, PowerPoint).
Frequently required to position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods, including moving materials weighing up to 35 pounds.
Perform equipment and material inspections—checking for smooth operation, secure attachments, material suitability and condition, pre-use hazards, and proper documentation.
Knowledgeable of the individual steps in the crating process and determining crate integrity.
Experience with determining product specific requirements such as: Foam blocking, ocean bagging, push/fork labeling, caster removal, leveling pad installation (product specific, individually verified), dehumidification process, product fitment.

Our Commitment

#LI-RW1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Mechanical Engineer Sr (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of Lam India Global Hardware Team (LIGHT)

The Impact You’ll Make

In this role, you will directly contribute to the design and development of sub-systems and assemblies used in Semi-conductor machines

What You’ll Do

Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and testing / validation.
Lead design reviews, project reviews and participate in technical discussions.
Work with potential suppliers to ensure parts can be manufactured in accordance with performance and cost objectives.
Design components using variety of metals, plastics, and advanced coatings.
Select OEM components and materials.
Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, and manufacturability to properly specify designs.
Develop and conduct feasibility studies and test plans to characterize and validate design performance.
Create and edit procedures for installation, commissioning, troubleshooting and maintenance recommendation guide.
Provide support to engineering team and to field service for capital equipment at the Lam labs, factory and in the field.
Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
Collaborate with internal teams for procurement and assembly of components and equipment.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in mechanical engineering with 4+ years of experience; or an advanced degree with 2~3 years previous professional experience
Strong Product Development and Design experience in Mechanical domain
Proficient in 3D CAD tools such as Solid Edge or CREO or Siemens NX
Hands-on experimental and design background coupled with solid engineering skills
Knowledge of machining, welding, molding, sheet-metal fabrication & casting processes
Ability to work well in a team, in a fast-paced matrixed environment with aggressive deadlines and multiple priorities

Preferred Qualifications

Excellent communication, both written and verbal, and technical presentation skills
Proficiency in design of mechanical / electromechanical components, experience in Semiconductor industry is a plus
Experience in project management, or problem solving while managing time and multiple priorities
Proficiency in designing medium complex sheet metal structure and release of manufacturing drawings
Proficiency in Thermal hand calculations and basic simulations (Conduction, Convection, Heat dissipation and increase in temperature) to facilitate selection of heat sinks, Cooling systems like Fans etc.
Knowledge in Engineering Change Management Process, SAP, PLM, TCE
Knowledge and exposure to ANSI, ASME, SAE, ISO, SEMI standards applicable to semiconductor industry

Our Commitment

Field Service Engineer 2 (Kaohsiung, TW-Kaohsiung-01, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Laboratory Service Engineer 2 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will contribute to concept and feasibility hardware to enhance current and develop next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment performing preventative and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gas and liquid materials using required Personal Protective Equipment.
Partner with cross-functional teams – including process development, hardware, and software engineering – on R&D activities, customer demos, and supporting equipment.
Install and provide support for prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks that vary from dynamic to consistent with clear and proactive communications.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in a technical field with 2+ years of experience; or Associates degree in a technical field or equivalent military training with 4+ years of relevant experience; or equivalent work experience.
This is a graduate eligible role.

Preferred Qualifications

Experience troubleshooting electrical, electro-mechanical, fluidic systems, and vacuum systems.
Proficient use of a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Capable of working in a cleanroom environment, wearing personal protective safety equipment, or cleanroom suit.
Semiconductor industry experience or understanding of Lam products is a plus.

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $25.48 - $58.65.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Process Engineer 3 (Fremont, CA)

The Impact You'll Make

What You'll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Partner cross-functionally and with customers to understand roadmaps, process flow, inflection points, requirements, and business challenges.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.
Professionally represents Lam to our valued customers.

Who We're Looking For

Minimum Qualifications

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD without experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Experience working in a collaborative and matrixed environment with diverse teams, semiconductor customers, and/or partners.
Experience in semiconductor, process design, deposition, etch dielectrics or conductor, metal films, etc.
Knowledge of Material synthesis and material characterization.

#LI-HC2

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you through a comprehensive set of outstanding benefits. Including:

Competitive salaries
Employee stock purchase plans
Comprehensive medical, dental, and vision plans
Supportive resources for growing family including parental leave
Student loan assistance and education assistance

CA San Francisco Bay Area Salary Range for this position: $78,000.00 - $176,000.00

Product Engineer 3 (Fremont, CA)

The Impact You'll Make

What You'll Do

Engineer innovative semiconductor equipment and process design solutions to quickly resolve customer issues and improve product quality in a dynamic fast-paced challenging environment.
Supports product development from product prototyping, development, deployment/product release, and initial field support.
Design and conduct experiments, tests, and prototypes to resolve complex technical problems.
Maintain a high degree of customer engagement including face-to-face and international travel to customer sites supporting near term product releases and solve customer issues.
Create clear and concise reports to present analysis and support technical recommendations.
Collaborate with cross-functional and cross-cultural teams to guide the specification and development of products.
Provides technical support for installation and/or diagnosing, troubleshooting, repairing, and debugging complex product issues.
Works in a cleanroom lab and/or customer semiconductor fab environment.

Who We're Looking For

Minimum Qualifications

Master’s degree in Material Science, Electrical Engineering, Mechanical Engineering, Optics, Physics, Chemistry, Chemical Engineering, or related field with 3 years of experience; or a PhD without experience; or equivalent experience.
Analytical and experimental design skills.
Creative thinking, problem solving, and troubleshooting capabilities.
Clear communication and presentation skills.
Comfortable traveling up to 25% of the time.

Preferred Qualifications

Prior product design and technical engineer experience is beneficial.
Experience designing, specifying, building, operating, and maintaining semiconductor, automotive, aerospace, or related hardware, tools, and equipment.
Experience coordinating and communicating with cross-functional teams.

#LI-HC2

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you through a comprehensive set of outstanding benefits. Including:

Competitive salaries
Employee stock purchase plans
Comprehensive medical, dental, and vision plans
Supportive resources for growing family including parental leave
Student loan assistance and education assistance

CA San Francisco Bay Area Salary Range for this position: $78,000.00 - $176,000.00

Mgr, Talent Acquisition (Hsinchu, TW-Hsinchu, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

Manages the staffing/employment function and activities. Ensures that staffing needs are met in accordance with governmental requirements. Develops and implements recruiting plans to staff open requisitions while minimizing cost per hire. Develops and administers talent management efforts and employee referral programs. Manages contractual relationships with placement agencies, contract recruiters; retained and contingent, job boards, job fairs and various internet job search websites for posting requisitions and surfacing candidates. Manages the resume tracking system. Ensures consistent corporate image throughout recruiting campaigns. May serve as or oversee website content expert for Staffing & Recruitment. May maintain manpower planning system and provide guidance to management on employment matters and/or affirmative action plans, as applicable. Submits reports concerning hiring trends, turnover rates, candidate feedback, etc. to Human Resources staff and/or senior management, as appropriate. Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

What You’ll Do

Key Responsibilities:

Act as an advisor and partner to the Taiwan business leaders; develop and implement long-term hiring strategies and focused on critical leadership talent needs across all Lam Taiwan businesses.
Analyze internal recruitment data and trends (including talent/diversity gaps) provide insights and drive strategies to meet short term and long-term hiring goals
Proactively represent Lam as a thought leader both internally and externally. Facilitate and Promote awareness of Lam’s global diversity and inclusion initiatives
Gather requirements and proactively identify trends that may impact the candidate and hiring manager experience. Deploy tools/surveys that will enhance both candidate and hiring manager experiences.
Enable data driven decisions by systematically gathering information from a variety of sources, identify implications of data, draw conclusions, generate alternatives and solutions by using quality metrics and data
Manage and monitor internal applicant tracking system, ensuring that all candidates and applicants are properly tracked and responsible for driving accuracy on the system

What You'll Do

Build & drive Talent acquisition KPI’s and dashboards
Participate as a key member of the business leadership team for Taiwan
Champion Lam Research’s core values as role models of the culture, built on a foundation of honesty and integrity
Partner with HR operations leader to assimilate, onboard talent to fulfill growing business needs
Establish effective working relationships with regional COE leaders and teams to ensure successful talent and rewards strategies

Who We’re Looking For

Demonstrated success partnering with business leaders to deliver results through human resource initiatives
Design and deploy recruitment talent strategies and processes that support the overall business goals.
Harbor successful working relationships with the wider HR teams and key business managers / directors, demonstrating a sound understanding of the business requirements
Experience leading a talent acquisition function, working in a highly complex technology industry; experience in the semiconductor industry experience is preferable
Excellent customer relationship management and consultation skills, including influencing and collaboration
Understanding how to balance strategy and business acumen to best invest resources and maximize impac

Who We’re Looking For

An empowered self-starter able to work without significant oversight and follow through to impactful execution
Prowess handling multiple projects, prioritizing and acting with a sense of urgency
Exhibit effective business judgment and business acumen, sound decision-making, and the ability to set or adjust priorities as the business environment demands shift
Have strong interpersonal and influence skills to establish and build strong rapport and partnerships with leadership and Global Human Resources
Operate with a sense of urgency, bias for action, and possess an authentic desire to thrive in a complex organization
Strong detail orientation working hands-on in a complex matrix organization
At least 10 years of progressive leadership experience in human resources
Bachelor’s degree required; Master’s degree preferred

Our Commitment

Director of Technology (Salzburg, AT)

The Group You’ll Be A Part Of

In the Global Products Group, we are dedicated to excellence in the design and engineering of Lam’s etch and deposition products.
The Panel level Product Group is focused on wet processing for advanced packaging on large panel formats such as ECD and wet cleans & etch.
We drive innovation to ensure our cutting-edge solutions are helping to solve new challenges in the semiconductor advanced packaging arena.

The Impact You’ll Make

Technical and operational leadership of the process technology team including development and demo lab activities, advancement of the process technology roadmap, helping define hardware requirements to meet the technology roadmap, cost of ownership calculations, POR definition, developing a response to a competitiveness scorecard.

What You’ll Do

• Technical and operational management of the technology team in Salzburg, Berlin and other development sites, along with close alignment and support to the field technology team;

• Leading the development of differentiated electrochemical and wet processing applications such as clean, strip , develop and etching processes for panel and substrate technologies;

• Planning and execution of complex scientific and technical experiments;

• Evaluation, documentation and presentation of results and methods;

• Literature research of existing processes and products;

• Writing of technical reports and presentations;

• Customer Engagements for technology;

• Traveling for regular customer visits to cover issues, present and discuss our roadmaps and help manage escalations;

• Ownership of customer and inhouse demos in our labs;

• Manage all lab activities including , resource planning, customer demo request meeting, tool availability, metrology, chemical and waste management;

• Management and help to engineers running demos;

• Attending and presenting at trade shows and technology conferences;

• Publishing in academic and industry papers;

• Coordinating experiments with universities and internal Innovation department.

Who We’re Looking For

• Completed university studies (master's degree or diploma) in chemistry, electro chemical engineering, materials science or similar;

• At least 8-10 years of related experience;

• Several years of leadership experience and proven ability to lead a team;

• Business fluent English language skills;

• High customer orientation;

• Stress resilient;

• Strong technical interest;

• Solution orientated;

• Systematic approach and planning to ensure methodical progress and work and independent application of strategies and procedures for problem solving (e.g. FMEA);

• Good communication skills and intercultural competence.

Preferred Qualifications

Our Commitment

Marketing Analyst 3 (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

The Impact You’ll Make

Provides support for the product marketing function through research and analysis of the company's markets, competition and product mix. Researches and makes presentations on new market areas. Analyzes the competitive environment and future trends and makes recommendations based on findings. May publish regular updates on market conditions to track company progress in specialized market niches or product technology disciplines.

What You’ll Do

Who We’re Looking For

Minimum of 5 years of related experience with a Bachelor’s degree; or 3 years and a Master’s degree; or a PhD without experience; or equivalent work experience.

Preferred Qualifications

Our Commitment

Software Technical Lead Engineer (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of

The Impact You’ll Make

As a Software Application Engineer at Lam, you’ll be at the forefront of driving innovation and adoption of our software products. You’ll support fast product evolution through agile processes by analyzing, designing, programming, testing, debugging, and enhancing software applications. With your expertise and initiative, you’ll turn ideas into great products that support advancements in Lam’s semiconductor technology.

In this role, you will have a significant impact on the innovation and efficiency of Lam's products and services. By developing enterprise grade software applications, you will enable data-driven decision making, optimize workflows, enhance user experience, and improve quality and performance of Lam's hardware and processes.

What You’ll Do

Design, develop, and maintain [insert software application(s) or focus area].
Drive adoption of internal software products across Lam.
Collaborate with application teams and process engineers in planning, data collection, modeling, data analysis, and report results to stakeholders.
Partner cross-functionally to understand Product roadmaps, process flow, inflection points, software requirements, and business use cases.
Provide requirements and user stories to product managers and developers to ensure required capabilities are available for applications.
Acts as single point of contact accountable for applications and key projects.
Works with stakeholders to determine appropriate multi-product workflows or integration including database connections to transform data between the application and the database.
Develop clean, scalable, maintainable, and testable application code.
Implement unit, integration, and end-to-end testing to enhance functionality of software applications.

Who We’re Looking For

Bachelor’s degree in Software Engineering, Computer Science, or related field with 5+ years of experience; or Master’s degree with 3+ years; or a PhD with no previous professional experience; or equivalent work experience.
Experience in [insert specifics e.g., front-end, back-end, data analysis].

Preferred Qualifications

Proficient in python, [insert other specific programming language], or similar programming languages.
Familiarity with software product development methodologies.
Effective organizational skills to manage multiple tasks simultaneously, adjust to shifting priorities, and meet business needs.
Excellent interpersonal skills to coordinate and communicate with diverse, cross-functional, and matrixed internal and external partners.
Prior semiconductor experience is preferred.

Our Commitment

Mechanical Engineer 6 (Fremont, CA, US, 94538)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Organize, participate, and lead in the conceptualization, modeling, analysis, development, documentation, and test/validation of hardware associated with new semiconductor equipment
Design critical mechanical systems for advanced semiconductor equipment that are used for CVD/ALD deposition. Examples include but not limited to pedestals, showerheads, chemical delivery system and plasma ion sources
Develop and present reports/presentations that communicate design intent, analysis, and validation at executive-level meetings
Directly support personnel in the preparation of detailed design, design testing and prototype fabrication
Analyze designs developed – may need to perform structural analysis (FEA), thermal analysis and fluid flow analysis
Conduct feasibility studies – including generation of well documented test plans
Perform Failure Modes and Effects Analysis
Provide design information to drafting for packaging documentation
Communicate among diverse teams (process engineers, technicians, software/controls, suppliers, etc.)
Work with potential suppliers to ensure parts can be manufactured in accordance with performance and cost objectives
Provide work leadership and training to junior and new engineers

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Mechanical Engineering or related field with 15+ years of experience; or Master’s degree with 12+ years’ experience; or equivalent experience.

Preferred Qualifications

Semiconductor industry experience is not required, but a plus

Our Commitment

#LI-LH1

Salary

CA San Francisco Bay Area Salary Range for this position: $140,000.00 - $302,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

#LI-LH1

IND123

GLD2017

Laboratory Service Engineer 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

In this role, you will also contribute to concept and feasibility hardware to enhance current systems and helping develop the next generation of semiconductor equipment for our customers.

What You’ll Do

Operate in an R&D environment, performing preventive and corrective maintenance, troubleshooting, upgrades, and calibrations on equipment.
Diagnose and repair mechanical, electromechanical, electronic, and vacuum equipment.
Ensure safe handling of hazardous gases and liquids using required personal protective equipment (PPE).
Collaborate with cross-functional teams—including process development, hardware, and software engineering—on R&D activities, customer demonstrations, and equipment support.
Install and support prototype equipment, developing procedures and documentation.
Maintain alignment on priorities across tasks ranging from dynamic to routine, using clear and proactive communication.

Who We’re Looking For

Preferred Qualifications

Experience troubleshooting electrical, electromechanical, fluidic systems, and vacuum systems.
Proficient in using a variety of hand tools and electronic test equipment for maintenance, repair, and assembly tasks.
Able to work in a cleanroom environment while wearing personal protective equipment (PPE) or a cleanroom suit.
Experience in the semiconductor industry or familiarity with Lam products is a plus.

Our Commitment

#LI-SH2

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Spare Parts Planning Analyst, NPI (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

This role can be located in Tualatin, OR; Fremont, CA; or Phoenix, AZ.

The Impact You’ll Make

Lam Research is seeking an experienced Spare Parts Planning Analyst focused on New Product Introduction (NPI). This critical role ensures that spare parts are accurately identified, strategically planned, and available in alignment with product launch timelines. As a strategic partner to internal stakeholders such as product teams, supply chain, and regional service operations—the analyst drives cross-functional collaboration and ensures spares inventory readiness to support seamless product introductions and enhance operational efficiency. The ideal candidate will also manage part transitions to minimize disruptions and maintain service continuity.

What You’ll Do

Partner with cross-functional stakeholders to align spare parts requirements for new product introductions and part transitions.
Develop and implement initial stocking strategies for spare parts across global warehouses and regional service depots.
Coordinate with supply chain teams to ensure availability of parts to support product launches.
Monitor and manage inventory levels to optimize part availability while maintaining cost efficiency and minimizing excess.
Represent spare parts planning in cross-functional meetings, ensuring alignment with broader product and service objectives.
Analyze historical usage and regional demand data to forecast spare parts needs, proactively adjusting plans to mitigate risk of shortages, excess, or obsolescence.
Perform data analysis using SQL and Power BI, delivering insights through dashboards and reports, and providing ad hoc analysis to support functional stakeholders as needed.

Who We’re Looking For

Bachelor’s degree in Business, Supply Chain, Engineering, or a related field; or equivalent relevant work experience in lieu of a degree.
Twelve (12) years of progressive experience in supply chain planning, preferably within spare/service parts or new product introduction (NPI) environments.
Advanced proficiency in SAP and other supply chain planning tools.
Comprehensive understanding of bill of materials (BOM) structures, product lifecycle management, and inventory control practices.
Excellent communication skills with a demonstrated ability to collaborate effectively across global, matrixed, and cross-functional teams.

Preferred Qualifications

Demonstrated experience supporting product launches in manufacturing or high-tech industries.
Strong understanding of service operations and inventory optimization strategies.
Skilled in managing multiple projects and adapting to shifting priorities in dynamic, fast-paced environments.
Proficient in database and data warehouse technologies (Azure Synapse, SQL Server, SAP HANA), as well as data analysis, profiling, and visualization tools (Power BI).
APICS certification (CPIM or CSCP) is a plus.
Experience with Lean Six Sigma methodologies to drive process improvements and enhance operational efficiency.

Our Commitment

#LI-YS1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

RF Engineer 2 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

You will be responsible for performing professional electrical engineering research, design, development, modification, and evaluation in support of electrical and electro-mechanical systems/subsystems.
You will work with a multidisciplinary engineering design team: electrical, mechanical, software, process, technical support, and suppliers, on the design, modification, of custom and OEM embedded systems components.
Primarily responsible for design/selection, testing and documentation of RF delivery systems (100kHz to 100MHz; Watt to Kilowatt ranges).
You will need to prepare and analyze test plans and procedures to assure that technical and operational requirements are met and properly demonstrated.
You will be responsible for the collection and analysis of pertinent material and data in preparation of your presentation at design, project, and program reviews.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree and a minimum of 2 years of related experience; or an advanced degree without experience; or equivalent work experience.
Must have knowledge of EM fields theory and RF metrology (Power Meters, Network-, Impedance- and Spectrum Analyzers, etc.).
Familiarity with high voltage (>1kV) design rules/practices DC – 100MHz is also desired.
SPICE, LabView, MathCAD or MatLab, and analysis tools (i.e. – HFSS, Comsol, Microwave Studio) experience preferred.
Experience in or fundamental knowledge of plasma processing, plasma sources and plasma loads is a plus.
Excellent communication and presentation skills
Outstanding analysis and trouble-shooting skills
Ability to work and accomplish tasks individually as well as in a dynamic-teams environment
This is a graduate eligible role.

Preferred Qualifications

Our Commitment

#LI-LE1

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Applications Architect (Fremont, CA, US, 94538)

The Impact You’ll Make

We are seeking an experienced Applications Architect to join our team in Fremont, CA. This role will be responsible for architecting solutions to automate business processes using AI/low-code platforms and Dynamics 365 stack. The ideal candidate will have a strong background in Dynamics CRM, QuickBase low-code platform, Azure based Logic Apps based automation, and business process re-engineering and automation. Additionally, the candidate will play a key role in the Digital Transformation project to integrate SaaS/PaaS solutions in Lam and contribute to the Technical Architecture Forum.

What You’ll Do

Lead process automation initiatives using Power Platform, Dynamics 365 CRM, QuickBase low-code platform, RPA, and Azure Logic Apps based automation.
Serve as the go-to person for business process automation requirements for BU stakeholders in the US.
Play an architect role in Digital Transformation projects, coordinating SSO setup for all SaaS applications.
Contribute to the Technical Architecture Forum (TAF).
Handle management activities such as vendor SOWs, resource onboarding, PR/PO requests, etc.
Provide broader portfolio leadership on Wafer and Symphony applications with the help of technical architects.

Who We’re Looking For

Bachelor/master’s degree in computer science, Information Technology, or related field.
Minimum of 6 years of experience in Power Platform architecture and automation initiatives.
Strong experience with Dynamics CRM, QuickBase low-code platform, and Logic Apps based automation.
Proven track record in business process automation and Digital Transformation projects.
Experience in coordinating SSO setup for SaaS applications.
Excellent leadership and team management skills.
Strong communication and collaboration skills.
Ability to handle multiple management activities and provide portfolio leadership.

Preferred Qualifications

Experience with Dynamics 365 CRM applications.
Familiarity with vendor SOWs, resource onboarding, PR/PO requests.
Participation in Technical Architecture Forum (TAF).

Our Commitment

Salary

CA San Francisco Bay Area Salary Range for this position: $140,000.00 - $302,000.00.

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Field Service Engineer 2 (Kaohsiung, TW-Kaohsiung-01, TW)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions or request assistance to minimize downtime, system interruptions, and equipment malfunctions.
Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
Maintain records and reports to coordinate activities between Lam and the customer.
Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
Transparently discuss opportunities and challenges with customer to increase trust.
Update customer on status of Lam tools as needed.

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in Electronics, Engineering, or related field with 2+ years of experience; or an advanced degree without experience; or equivalent work experience.
Proficiency in interpreting electrical and mechanical schematics, diagrams, and operation manuals.
Able to work in a clean room environment while wearing personal protective safety equipment, or cleanroom suit.
Frequently position oneself (e.g., bend, stoop, reach, walk, sit, twist, squat, kneel, climb, stand) to perform job tasks for extended periods.
Able to travel frequently, domestically and internationally, based on customer needs, flexibility to work a variety shifts including compressed and alternative workweeks including overtime and on-call if needed.
This is a graduate eligible role.

Preferred Qualifications

Proficiency in basic computer skills and familiarity with common office software including Microsoft Office Suite.
Experience in installation, maintenance, repair and troubleshooting of semiconductor capital equipment is a plus.
Communication skills, both written and verbal, in English.
Foundational analytical and problem-solving skills.

Our Commitment

Benefit Specialist(Fixed Term) (Yongin, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

We are seeking a Benefits Specialist to join Lam’s global Total Rewards Center of Excellence(COE) team. The role will provide a broad range of, analysis, and process support to HR Business Partners, Recruiters, and employees & business Leaders in Korea. This is a full-time, on-site flex position located in Yongin and reporting directly to the Total Rewards Manager.

The Benefits Specialist will play a major role in the promotion and expansion of our global benefits, time and attendance, well-being programs, and other HR projects & initiatives. Lam’s programs are designed to be competitive, cost effective, and consistent with Lam’s values, business goals, and global total rewards strategy.

· Serves as a benefit specialist on global and regional benefits programs for Korea

· Partners with the HRBPs, HR Shared Services and other COEs to ensure benefits programs and processes

· Promotes various Lam’s benefits programs to employees

· Monitors and Identifies operational issues and opportunities to update or improve policies and procedures

· Support and manage prioritized HR projects and/or initiatives

Other Job Responsibilities

Plans, lead, and manage annual benefit programs in partnership with HR Shared Service
Manages regional benefits vendors for (annual) benefits renewals
Work closely with finance for any TR related payroll or any HR related matters
Promotes global and regional Lam’s benefits programs including Well being programs
Manages ad-hoc HR & benefit projects and initiatives based on global or local specific needs
Supports Total Rewards Manager for the educational roll-out, change management, and adoption of new and/or changing benefits programs
Submit Account Payable requests for benefits program
Reviews and ensures benefit programs are executed by HR Shared Services in accordance with the policies and guidelines
Ensures benefits standards comply with company policies and/or other regulation or legislation
Monitors and identifies operational issues and opportunities to update or improve benefit policies and procedures in EDMS
Support HR communication, HR operation, Governance reporting working with HR COEs & HR head

Who We’re Looking For

Preferred Qualifications

· Bachelor’s degree in Business, HR or a related field with a minimum of 3 years relevant experience in the C&B function

· Compensation and benefits knowledge with demonstrated progressive responsibilities, preferably in the high technology and/or manufacturing industry within global companies

· Demonstrated Korean and English language verbal and written communication skills required

· High proficient with desktop software, including MS word, Power Point, and Excel

· Excellent customer service skills and strong work ethic; ability to interface effectively with employees across cultures

Our Commitment

EHS Engineer - Site safety officer (Yongin, KR-Yongin-03, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

This role in the Environmental Health & Safety (EHS) team is responsible for complying applicable local regulation and implementing the occupational safety programs at the Lam Research, Korea Technology Center research and development (R&D) facility. This position provides strong technical support for the occupational safety programs including: the control of hazardous energy, contractor safety, fall protection, pre-task safety planning, gas and chemical safety, hazardous materials communication, risk assessment, and emergency preparedness and response.

What You’ll Do

•   This position will be assigned as a regulatory site safety officer (사업장 안전관리자) based on Korea regulatory requirement and the person should be competent to implement the requirements.
•   Lead the Korea-OSHA required site risk assessment using related tools such as the KRAS, JSA, and CHARM. This includes the development of the site risk assessment protocol, the establishment of the site risk assessment organization, conducting initial/regular risk assessments for routine/non-routine tasks, and the development and delivery of its training to relevant personnel.
•   Ensure that government-targeted equipment, safety guards, tools, and PPE receive and maintain certification or inspection. Manage the periodic renewal certifications and inspections, which may include cranes, lifts, aerial work platforms, scissor lifts, forklifts, pressure vessels, and pressure safety valves.
•   Engage with regulatory agency inspections. Prepare safety-related permit/notification, monitoring reports, and submit deliverables, such as the Hazardous Prevention Plan (유해위험방지계획서).
•   Prepare and report K-OSHA defined incidents or injuries to the relevant government or agency, conducting root cause analysis, developing and following up actions.
• Responsible for contractor and vendor safety management, including selection and evaluation, training, field inspection, coaching, and ensuring the inspection of incoming safety equipment and tools.
• Develop K-OSHA site health and safety management plan and ensure adherence of requirements with updating regulation change
•   Manage the quarterly site health and safety committee, the monthly health and safety contractor committee with all site contractors, weekly area inspections with responsible safety supervisors, and quarterly combined area health and safety inspections with KTC and contractors, followed by the implementation of appropriate preventive or corrective actions.
•   Develop the annual health and safety training plan and materials for each subject, and provide training sessions including contractor orientation, new-hire training, regular training, MSDS, job change training, special task assignment training based on K-OSHA requirements or as required. Maintain training rosters and records and ensure employee training requirements comply with Lam EHS policies and regulatory requirements.
•   Responsible for the management of PPE, including selection, certifications, training, distribution, and field inspections.
•   Develop and implement the site safety management programs/plan, ensuring compliance with all applicable standards and regulations.
•   Knowledgeable of Korean regulations pertaining to occupational safety, incident reporting, construction safety, laboratory safety, chemical/gas safety, and hazardous materials management.
•   Develop and implement site Safety procedures, guideline, and training materials in line with Lam global EHS program standards and Korea regulatory requirements.
•   Manages the Emergency Response Team (ERT) and emergency response program. Responsibilities include conduct drills and serves as the First Responder for onsite emergency response events.
•   Promotes a Proactive, Collaborative, and Engaging Safety Culture. Must partner with operations and facilities management to drive alignment and continuity. Must have a proactive and positive team-working relationship.
•   Performs other duties assigned by manager.

Who We’re Looking For

•   Bachelor’s degree or above in chemical or gas engineering, occupational safety, environmental science, or another related field.
• 7-12years of safety experience in multinational companies, chemical/gas or semiconductor industries.
•   Poses occupational safety professional certification (산업안전기사) through the Korean government or is eligible to be designated as a Safety officer under the Korea Occupational Safety & Health Act.
•   Intermediate or above English speaking and writing ability.
•   Working knowledge of Korean safety regulations and global best practices
•   Self-starter with critical thinking, self-guide and educate skills. Strong problem solving and decision-making skills based on priorities with having proper sense of urgency.
•   Team player with strong interpersonal skill, capable of working within cross-functional, multitask and external team. Good communication skills
•   Experience in a fast paced, changing/growing organization.
•   Must be comfortable working in laboratory, clean room, process facility and construction environments.
•   Proficiency at MS office

Preferred Qualifications

• Another EHS related professional certifications such as air emission, wastewater, dangerous goods, industrial hygiene, high-pressure gas, electrical safety, fire safety, radiation etc. are plus.
• Experience on conducting or supporting HAZOP studies, FMEA, Consequence Analysis or other quantitative risk assessment.

Our Commitment

Mechanical Program Lead Engineer (Bangalore, IN-Bangalore, IN)

The Group You’ll Be A Part Of: Lam India Global Hardware Team (LIGHT)

The Impact You’ll Make

In this role, you will directly contribute to the design and development of sub-systems and assemblies used in Semi-conductor machines.

What You’ll Do

Responsible & accountable to execute multi-discipline (Mechanical, Thermal) & multi-domain (CFD, Ceramic materials, coating technologies) engineering problems with full ownership - Concept maturity, Engineering, Testing & Deployment
Responsible to lead a team of Engineers to drive engineering excellence, optimize and implement solutions for projects as part of trouble shooting at customer or supplier end, continuous improvement programs (CIP), cost reduction, reliability improvement and RCCAs
Support staffing, training, mentoring & coaching, and strategic planning to build capacity and capability.
Lead medium to high complex sub-system related projects with full ownership through product life cycle of mechanical and electro-mechanical systems from concept to productization including, designing, CAD modeling, development, and testing / validation..
Lead design reviews, project reviews and participate in technical discussions.
Collaboration with cross functional teams to develop robust design solutions.

You need to know:

Knowledge of various Materials (Al, Steel, SS, Ceramic, Coatings & Treatment) Properties, Vacuum applications & its compatibility with various chemicals etc
Understand application of different materials, their behavior at range of temperatures and Pressure applications, understands various failure modes leading to failure in vacuum applications (Contamination, Degassing etc)
Application of Materials, Strength of Materials, Theory of Machines, Heat and Mass Transfer and Fluid Mechanics “know-how, concepts & engineering approach” to solve Engineering problems

Who We’re Looking For

Minimum Qualifications:

Bachelor’s degree in mechanical engineering with 12+ years of experience; or an advanced degree with 10+ years of previous professional experience
Excellent leadership skills in team planning, strategizing, innovation
Proficient in managing deliverables of interdisciplinary engineering team for tasks, projects, or program and to drive engineering excellence in Volume manufacturing phase
Decision making experience to solve problems related to Engineering and Business processes in collaboration with cross functional team in a matrixed organization
Proficient in concept design and development of complex components/medium-complex sub-systems by following PDR process – generating engineering requirement specification, conducting design reviews, performing DFMEA, validating designs through prototyping and testing and releasing engineering documentation
Demonstrated Problem Solving and Decision-Making ability by applying structured processes & tools such as 8D, Fishbone, 5 Whys, Pugh matrix & Pareto chart
Experience in driving and managing projects in collaboration with CFT (Manufacturing, Supply chain, Electrical/controls engineering and Product safety) for project deliverables
Expertise in Design for Manufacturability, Assembly, Serviceability, Cost principles, and Engineering Change Management
Strong Product Development and Design experience in Mechanical domain

Preferred Qualifications

Experience in Semiconductor Wafer Fab Equipment (WFE) domain
Experience in Sheetmetal design and manufacturing processes
Exposure to design of Fluidics and Pneumatics systems and selection of OEM components like Fluid system fittings, Valves, Transducers, Pressure Regulators, Sensors, Gauges, etc.
Knowledge in Engineering Change Management Process, SAP, PLM, TCE, Project Management tools (MS Project), exposure to Value Analysis / Value Engineering (VAVE) concepts
Proficiency in Thermal hand calculations and basic simulations (Conduction, Convection, Heat dissipation and increase in temperature) to facilitate selection of heat sinks, Cooling systems like Fans etc.
Knowledge and exposure to ANSI, ASME, SAE, ISO, SEMI standards applicable to semiconductor industry

Our Commitment

Benefits Specialist 3 (Yongin, KR-Yongin-02, KR)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Serves as a benefit specialist on global and regional benefits programs for Korea
Partners with the HRBPs, HR Shared Services and other COEs to ensure benefits programs and processes
Promotes various Lam’s benefits programs to employees
Monitors and Identifies operational issues and opportunities to update or improve policies and procedures
Support and manage prioritized HR projects and/or initiatives
Plans, lead, and manage annual benefit programs in partnership with HR Shared Service
Manages regional benefits vendors for (annual) benefits renewals
Work closely with finance for any TR related payroll or any HR related matters
Promotes global and regional Lam’s benefits programs including Well being programs
Manages ad-hoc HR & benefit projects and initiatives based on global or local specific needs
Supports Total Rewards Manager for the educational roll-out, change management, and adoption of new and/or changing benefits programs
Submit Account Payable requests for benefits program
Reviews and ensures benefit programs are executed by HR Shared Services in accordance with the policies and guidelines
Ensures benefits standards comply with company policies and/or other regulation or legislation
Monitors and identifies operational issues and opportunities to update or improve benefit policies and procedures in EDMS
Support HR communication, HR operation, Governance reporting working with HR COEs & HR head

Who We’re Looking For

Bachelor’s degree in Business, HR or a related field with a minimum of 5 years relevant experience in the C&B function
Compensation and benefits knowledge with demonstrated progressive responsibilities, preferably in the high technology and/or manufacturing industry within global companies
Demonstrated Korean and English language verbal and written communication skills required
High proficient with desktop software, including MS word, Power Point, and Excel
Excellent customer service skills and strong work ethic; ability to interface effectively with employees across cultures

Preferred Qualifications

Our Commitment

Process Engineer 3 (Tualatin, OR, US, 97062)

The Group You’ll Be A Part Of

The Impact You’ll Make

What You’ll Do

Conduct process engineering research, development, and evaluation in support of Lam’s cutting-edge semiconductor equipment and systems.
Review and enhance processing techniques and methods applied in the manufacture and fabrication of products.
Develop and sustain new processes and process improvements to reduce production costs and increase yields.
Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
Collaborate internally to plan, collect data, analyze results, and report on customer demos for existing process applications.
Contribute to next generation product development and release activities supporting the semiconductor roadmap.
Provide leadership, clear direction, and guidance to process technicians to support execution activities.

Who We’re Looking For

Minimum Qualifications:

Master’s degree in Materials Science, Chemical Engineering, Chemistry or Physics or related field with 3+ years of experience; or a PhD with no previous professional experience; or equivalent experience.

Preferred Qualifications

Familiarity with working in a laboratory and on semiconductor equipment with experience in surface preparation and analytical techniques.
In-depth understanding of Statistical Process Control (SPC) and/or Design of Experiments (DOE).
Highly proficient in MATLAB, Python, or other similar scientific computing language.
Working knowledge of statistical analysis and problem-solving methodologies.
Experience with statistical tools (JMP, Minitab, etc.)
Background in Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), or Physical Vapor Deposition (PVD).
Background in Plasma Physics, Reactive Ion Etching (RIE), Atomic Layer Etching (ALE), Inductively Coupled Plasma (ICP), Capacitively Coupled Plasma (CCP).

Our Commitment

Our Perks and Benefits

At Lam, our people make amazing things possible. That’s why we invest in you throughout the phases of your life with a comprehensive set of outstanding benefits.

Software Engineer (all genders) (Villach, AT)

The Impact You’ll Make

As a Software Engineer at Lam, you will be at the forefront of innovation by designing, developing, and troubleshooting, and debugging software programs. Your role is pivotal in developing software tools that support design, infrastructure, and technology platforms. Your expertise will determine hardware compatibility and influence design, ensuring seamless integration between software and hardware.

What You’ll Do

Design, develop, troubleshoot, and debug software programs for our industrial machine controls applications.
Write efficient, reliable code in C/C++ for computer devices, as well as interfaces, ensuring functionality and stability.
Create, optimize, and integrate drivers for peripherals and interfaces like sensors, actuators, and communication modules.
Analyze and optimize code for memory constraints, performance, and power consumption in embedded environments.
Ensure maintainability of our first-class codebase through regular peer reviews, testing, and documentation.
Conduct unit and functional testing, debugging, and troubleshooting of our controls software applications to ensure functionality and stability.
Collaborate with hardware engineers to integrate software with hardware components and systems.
Stay updated with industry trends, best practices, and emerging technologies in C++ programming for hardware equipment controls.
Provide technical guidance and mentoring for junior engineers.

Who We’re Looking For

Master's or Bachelor's degree in computer engineering, electronics, or similar relevant engineering disciplines with 3+years of working experience.
Very good coding skills in modern C++, including API design, object-oriented and functional programming, as well as component-level software architecture.
Familiar with network, serial device control, and IO control systems.
Furthermore, you have a clear understanding of high-level multithreading operating systems, drivers, hardware abstraction layers, middleware, and application software concepts.
Experience and comprehensive understanding of any kind of RTOS is a plus!
Experience with designing closed loop algorithms in Matlab and Simulink is a plus!
You are proficient in spoken and written English.

What We're Offering

This position will be occupied in Villach. It is subject to the Austrian Collective Bargaining Agreement for Employees in the Metal Technology Industry in occupation group E or F depending on educational background. A higher payment is negotiable depending on expertise and skills. The monthly salary is paid 14 times per year. Please follow the link on the below section "Employment in Austria" for further information.

Villach - a great place to live and work

Follow the link www.welcome2villach.at and you will find on the spot the most important information about living, working and studying in and around Villach/Austria

Our Commitment

Logistics Process Expert (Batu Kawan, MY-Bayan Lepas-01 [2700] , MY)

The Group You’ll Be A Part Of

Exceptional people come together to work at Lam Research. Every day, we drive the precision and accuracy that enable our customers to create the world’s most incredible technology–working at scales 1,000 times smaller than a grain of sand. Our talented people are what makes our leadership in the industry possible. To enable this incredible level of innovation, we maintain a strong collaborative culture. A space where you are encouraged to seek out challenges and engage the expertise of others to create the highest quality outcomes.

The Impact You’ll Make

Global Operations at Lam Research has embarked on a business transformation journey to create next-generation business processes and solutions to significantly increase business efficiency and speed. The Logistics Process Expert is a unique opportunity to lead the transformation to enable future business growth at an unprecedented level.

What You’ll Do

As a Logistics Process Expert, you will collaborate to enhance the end-to-end logistics journey from suppliers to customers. You'll lead efforts to streamline and standardize processes, driving impactful business transformation and continuous improvement. Your initiatives will deliver value through process improvements, automation, and business intelligence to support data-driven decisions. Reimagine existing processes to boost efficiencies and achieve substantial improvements.

Who We’re Looking For

We are seeking a results-oriented professional with exceptional process mapping, problem-solving, and analytical skills. The ideal candidate will excel in communication, demonstrate thought leadership, and drive organizational change. A process-minded approach, experience in systems implementation, and the ability to influence stakeholders are essential

Minimum Qualifications:

Bachelor’s Degree in Business, Operational research, supply chain, or related field. MBA or
master’s preferred
5-7 years of experience in logistics, supply chain management, or a related field.
Proven track record of leading and managing transformational projects in logistics or supply chain environments.
Solution Design and implementation experience with
- Warehouse Management Systems (WMS)
- Transportation Management Systems (TMS)
- Enterprise Resource Planning (ERP) systems
- Automated Storage and Retrieval Systems (ASRS) technology

Preferred Qualifications

Industry-Recognized Certifications such as:

APICS Certified Supply Chain Professional (CSCP)
Certified Logistics Professional (CLP)
Project Management Professional (PMP)